lkml.org 
[lkml]   [2015]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] iio: accel: add support for Memsic MXC6255XC sensor
From
Date
On 25/10/15 11:49, Jonathan Cameron wrote:
> On 22/10/15 13:44, Teodora Baluta wrote:
>> This patch adds a minimal implementation for the Memsic MXC6255XC
>> orientation sensing accelerometer. The supported operations are reading
>> raw acceleration values for X/Y axis that can be scaled using the
>> exposed scale.
>>
>> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
> Other than a tiny nitpick below (which I'll fix up when applying)
> looks good to me. Small and perfectly formed!
oops - forgot to say

Applied to the togreg branch of iio.git. Initially pushed out as testing
for the autobuilders to play with it.

Jonathan
>
> Jonathan
>> ---
>> Changes since v1:
>>
>> - remove scale_available attribute
>> - use chan->address instead
>> - drop _AXIS_TO_REG macro
>> - put register address in .address field of MXC6255_CHANNEL macro
>> - check chip id
>> - use "as follows" instead of "as following"
>>
>> drivers/iio/accel/Kconfig | 11 +++
>> drivers/iio/accel/Makefile | 1 +
>> drivers/iio/accel/mxc6255.c | 199 ++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 211 insertions(+)
>> create mode 100644 drivers/iio/accel/mxc6255.c
>>
>> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
>> index 969428d..75ac087 100644
>> --- a/drivers/iio/accel/Kconfig
>> +++ b/drivers/iio/accel/Kconfig
>> @@ -158,6 +158,17 @@ config MXC4005
>> To compile this driver as a module, choose M. The module will be
>> called mxc4005.
>>
>> +config MXC6255
>> + tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver"
>> + depends on I2C
>> + select REGMAP_I2C
>> + help
>> + Say yes here to build support for the Memsic MXC6255 Orientation
>> + Sensing Accelerometer Driver.
>> +
>> + To compile this driver as a module, choose M here: the module will be
>> + called mxc6255.
>> +
>> config STK8312
>> tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
>> depends on I2C
>> diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
>> index 7925f16..525ed52 100644
>> --- a/drivers/iio/accel/Makefile
>> +++ b/drivers/iio/accel/Makefile
>> @@ -17,6 +17,7 @@ obj-$(CONFIG_MMA9551) += mma9551.o
>> obj-$(CONFIG_MMA9553) += mma9553.o
>>
>> obj-$(CONFIG_MXC4005) += mxc4005.o
>> +obj-$(CONFIG_MXC6255) += mxc6255.o
>>
>> obj-$(CONFIG_STK8312) += stk8312.o
>> obj-$(CONFIG_STK8BA50) += stk8ba50.o
>> diff --git a/drivers/iio/accel/mxc6255.c b/drivers/iio/accel/mxc6255.c
>> new file mode 100644
>> index 0000000..b853ff0
>> --- /dev/null
>> +++ b/drivers/iio/accel/mxc6255.c
>> @@ -0,0 +1,199 @@
>> +/*
>> + * MXC6255 - MEMSIC orientation sensing accelerometer
>> + *
>> + * Copyright (c) 2015, Intel Corporation.
>> + *
>> + * This file is subject to the terms and conditions of version 2 of
>> + * the GNU General Public License. See the file COPYING in the main
>> + * directory of this archive for more details.
>> + *
>> + * IIO driver for MXC6255 (7-bit I2C slave address 0x15).
> No need for the blank line below.
>> + *
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/i2c.h>
>> +#include <linux/init.h>
>> +#include <linux/iio/iio.h>
>> +#include <linux/delay.h>
>> +#include <linux/acpi.h>
>> +#include <linux/regmap.h>
>> +#include <linux/iio/sysfs.h>
>> +
>> +#define MXC6255_DRV_NAME "mxc6255"
>> +#define MXC6255_REGMAP_NAME "mxc6255_regmap"
>> +
>> +#define MXC6255_REG_XOUT 0x00
>> +#define MXC6255_REG_YOUT 0x01
>> +#define MXC6255_REG_CHIP_ID 0x08
>> +
>> +#define MXC6255_CHIP_ID 0x05
>> +
>> +/*
>> + * MXC6255 has only one measurement range: +/- 2G.
>> + * The acceleration output is an 8-bit value.
>> + *
>> + * Scale is calculated as follows:
>> + * (2 + 2) * 9.80665 / (2^8 - 1) = 0.153829
>> + *
>> + * Scale value for +/- 2G measurement range
>> + */
>> +#define MXC6255_SCALE 153829
>> +
>> +enum mxc6255_axis {
>> + AXIS_X,
>> + AXIS_Y,
>> +};
>> +
>> +struct mxc6255_data {
>> + struct i2c_client *client;
>> + struct regmap *regmap;
>> +};
>> +
>> +static int mxc6255_read_raw(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan,
>> + int *val, int *val2, long mask)
>> +{
>> + struct mxc6255_data *data = iio_priv(indio_dev);
>> + unsigned int reg;
>> + int ret;
>> +
>> + switch (mask) {
>> + case IIO_CHAN_INFO_RAW:
>> + ret = regmap_read(data->regmap, chan->address, &reg);
>> + if (ret < 0) {
>> + dev_err(&data->client->dev,
>> + "Error reading reg %lu\n", chan->address);
>> + return ret;
>> + }
>> +
>> + *val = sign_extend32(reg, 7);
>> + return IIO_VAL_INT;
>> + case IIO_CHAN_INFO_SCALE:
>> + *val = 0;
>> + *val2 = MXC6255_SCALE;
>> + return IIO_VAL_INT_PLUS_MICRO;
>> + default:
>> + return -EINVAL;
>> + }
>> +}
>> +
>> +static const struct iio_info mxc6255_info = {
>> + .driver_module = THIS_MODULE,
>> + .read_raw = mxc6255_read_raw,
>> +};
>> +
>> +#define MXC6255_CHANNEL(_axis, reg) { \
>> + .type = IIO_ACCEL, \
>> + .modified = 1, \
>> + .channel2 = IIO_MOD_##_axis, \
>> + .address = reg, \
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
>> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
>> +}
>> +
>> +static const struct iio_chan_spec mxc6255_channels[] = {
>> + MXC6255_CHANNEL(X, MXC6255_REG_XOUT),
>> + MXC6255_CHANNEL(Y, MXC6255_REG_YOUT),
>> +};
>> +
>> +static bool mxc6255_is_readable_reg(struct device *dev, unsigned int reg)
>> +{
>> + switch (reg) {
>> + case MXC6255_REG_XOUT:
>> + case MXC6255_REG_YOUT:
>> + case MXC6255_REG_CHIP_ID:
>> + return true;
>> + default:
>> + return false;
>> + }
>> +}
>> +
>> +static const struct regmap_config mxc6255_regmap_config = {
>> + .name = MXC6255_REGMAP_NAME,
>> +
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> +
>> + .readable_reg = mxc6255_is_readable_reg,
>> +};
>> +
>> +static int mxc6255_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>> +{
>> + struct mxc6255_data *data;
>> + struct iio_dev *indio_dev;
>> + struct regmap *regmap;
>> + unsigned int chip_id;
>> + int ret;
>> +
>> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
>> + if (!indio_dev)
>> + return -ENOMEM;
>> +
>> + regmap = devm_regmap_init_i2c(client, &mxc6255_regmap_config);
>> + if (IS_ERR(regmap)) {
>> + dev_err(&client->dev, "Error initializing regmap\n");
>> + return PTR_ERR(regmap);
>> + }
>> +
>> + data = iio_priv(indio_dev);
>> + i2c_set_clientdata(client, indio_dev);
>> + data->client = client;
>> + data->regmap = regmap;
>> +
>> + indio_dev->name = MXC6255_DRV_NAME;
>> + indio_dev->dev.parent = &client->dev;
>> + indio_dev->channels = mxc6255_channels;
>> + indio_dev->num_channels = ARRAY_SIZE(mxc6255_channels);
>> + indio_dev->modes = INDIO_DIRECT_MODE;
>> + indio_dev->info = &mxc6255_info;
>> +
>> + ret = regmap_read(data->regmap, MXC6255_REG_CHIP_ID, &chip_id);
>> + if (ret < 0) {
>> + dev_err(&client->dev, "Error reading chip id %d\n", ret);
>> + return ret;
>> + }
>> +
>> + if (chip_id != MXC6255_CHIP_ID) {
>> + dev_err(&client->dev, "Invalid chip id %x\n", chip_id);
>> + return -ENODEV;
>> + }
>> +
>> + dev_dbg(&client->dev, "Chip id %x\n", chip_id);
>> +
>> + ret = devm_iio_device_register(&client->dev, indio_dev);
>> + if (ret < 0) {
>> + dev_err(&client->dev, "Could not register IIO device\n");
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct acpi_device_id mxc6255_acpi_match[] = {
>> + {"MXC6255", 0},
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(acpi, mxc6255_acpi_match);
>> +
>> +static const struct i2c_device_id mxc6255_id[] = {
>> + {"mxc6255", 0},
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(i2c, mxc6255_id);
>> +
>> +static struct i2c_driver mxc6255_driver = {
>> + .driver = {
>> + .name = MXC6255_DRV_NAME,
>> + .acpi_match_table = ACPI_PTR(mxc6255_acpi_match),
>> + },
>> + .probe = mxc6255_probe,
>> + .id_table = mxc6255_id,
>> +};
>> +
>> +module_i2c_driver(mxc6255_driver);
>> +
>> +MODULE_AUTHOR("Teodora Baluta <teodora.baluta@intel.com>");
>> +MODULE_DESCRIPTION("MEMSIC MXC6255 orientation sensing accelerometer driver");
>> +MODULE_LICENSE("GPL v2");
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>



\
 
 \ /
  Last update: 2015-10-25 13:21    [W:0.057 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site