lkml.org 
[lkml]   [2015]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/8] spi: imx: add selection for iMX53 and iMX6 controller type
Hello

> Subject: [PATCH v2 4/8] spi: imx: add selection for iMX53 and iMX6 controller type
>
> ECSPI contorller for iMX53 and iMX6 has few hardware issues in slave
> mode and (32*n+1) SPI word size handling comparing to iMX51.
> The change add possibility to detect the SPI controller is use and apply
> workarounds/limitations.
> Documentation for device tree bindings updated
>
> Signed-off-by: Anton Bondarenko <anton_bondarenko@mentor.com>
> ---
> .../devicetree/bindings/spi/fsl-imx-cspi.txt | 2 ++
> drivers/spi/spi-imx.c | 36 ++++++++++++++++++++--
> 2 files changed, 35 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> index 523341a..425485f 100644
> --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
> @@ -9,6 +9,8 @@ Required properties:
> - "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31
> - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
> - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
> + - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53
> + - "fsl,imx6q-ecspi" for SPI compatible with the one integrated on i.MX6 family
> - reg : Offset and length of the register set for the device
> - interrupts : Should contain CSPI/eCSPI interrupt
> - fsl,spi-num-chipselects : Contains the number of the chipselect
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index d9b730d..41c9cef 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -72,7 +72,8 @@ enum spi_imx_devtype {
> IMX27_CSPI,
> IMX31_CSPI,
> IMX35_CSPI, /* CSPI on all i.mx except above */
> - IMX51_ECSPI, /* ECSPI on i.mx51 and later */
> + IMX51_ECSPI, /* ECSPI on i.mx51 */
> + IMX53_ECSPI, /* ECSPI on i.mx53 and later */
> };
>
> struct spi_imx_data;
> @@ -129,9 +130,20 @@ static inline int is_imx35_cspi(struct spi_imx_data *d)
> return d->devtype_data->devtype == IMX35_CSPI;
> }
>
> +static inline int is_imx53_ecspi(struct spi_imx_data *d)
> +{
> + return d->devtype_data->devtype == IMX53_ECSPI;
> +}
> +
> +static inline int is_imx5x_ecspi(struct spi_imx_data *d)
> +{
> + return d->devtype_data->devtype == IMX51_ECSPI ||
> + d->devtype_data->devtype == IMX53_ECSPI;
> +}
> +
> static inline unsigned spi_imx_get_fifosize(struct spi_imx_data *d)
> {
> - return (d->devtype_data->devtype == IMX51_ECSPI) ? 64 : 8;
> + return is_imx5x_ecspi(d) ? 64 : 8;
> }
>
> #define MXC_SPI_BUF_RX(type) \
> @@ -680,6 +692,16 @@ static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
> .devtype = IMX51_ECSPI,
> };
>
> +static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
> + /* i.mx53 and later ecspi shares the functions with i.mx51 one */
> + .intctrl = mx51_ecspi_intctrl,
> + .config = mx51_ecspi_config,
> + .trigger = mx51_ecspi_trigger,
> + .rx_available = mx51_ecspi_rx_available,
> + .reset = mx51_ecspi_reset,
> + .devtype = IMX53_ECSPI,
> +};
> +
> static const struct platform_device_id spi_imx_devtype[] = {
> {
> .name = "imx1-cspi",
> @@ -697,6 +719,12 @@ static const struct platform_device_id spi_imx_devtype[] = {
> .name = "imx35-cspi",
> .driver_data = (kernel_ulong_t) &imx35_cspi_devtype_data,
> }, {
> + .name = "imx53-ecspi",
> + .driver_data = (kernel_ulong_t)&imx53_ecspi_devtype_data,
> + }, {
> + .name = "imx6q-ecspi",
> + .driver_data = (kernel_ulong_t)&imx53_ecspi_devtype_data,
> + }, {
> .name = "imx51-ecspi",
> .driver_data = (kernel_ulong_t) &imx51_ecspi_devtype_data,
> }, {
> @@ -710,6 +738,8 @@ static const struct of_device_id spi_imx_dt_ids[] = {
> { .compatible = "fsl,imx27-cspi", .data = &imx27_cspi_devtype_data, },
> { .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, },
> { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
> + { .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
> + { .compatible = "fsl,imx6q-ecspi", .data = &imx53_ecspi_devtype_data, },
> { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
> { /* sentinel */ }
> };
> @@ -1299,7 +1329,7 @@ static int spi_imx_probe(struct platform_device *pdev)
> * Only validated on i.mx6 now, can remove the constrain if validated on
> * other chips.
> */
> - if (spi_imx->devtype_data == &imx51_ecspi_devtype_data &&
> + if (is_imx5x_ecspi(spi_imx) &&
> spi_imx_sdma_init(&pdev->dev, spi_imx, master))
> dev_err(&pdev->dev, "dma setup error,use pio instead\n");
>
>

With this patch, there will still be issues with SPI controller on imx6
soc other than imx6q,
for example SPI controller on imx6sl has compatibility
"compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";"

So I would suggest to update device-tree file,
for example
imx53.dtsi
"fsl,imx53-ecspi", "fsl,imx51-ecspi"; -> "fsl,imx53-ecspi";
imx6qdl.dtsi
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; -> compatible =
"fsl,imx6q-ecspi", "fsl,imx53-ecspi";
imx6sl.dtsi
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; -> compatible =
"fsl,imx6sl-ecspi", "fsl,imx53-ecspi";
etc...
by doing this, then only compatible string "fsl,imx53-ecspi" need to be
added in driver code.

Thanks,
Jiada


\
 
 \ /
  Last update: 2015-10-26 04:41    [W:0.049 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site