lkml.org 
[lkml]   [2015]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7] Documentation: add Device tree bindings for hwmon/nct7802
Date
Introduced subnodes sensor, fan and peci with properties.

Signed-off-by: Constantine Shulyupin <const@MakeLinux.com>
---
Changed in v7:
- sensors type (thermistor, thermistor, voltage) and pwm type
selected with type property instead of compatible property.

Changed in v6:
- Removed previous definition.
- Introduced subnodes sensor, fan and peci with properties.

Changed in v5:
- Fixed typos

Changed in v4:
- Removed registers initialization by names
- Added properties nuvoton,sensor*-type

Changed in v3:
- Fixed vendor prefix
- Added short registers description,
full registers description is available at
https://www.nuvoton.com/hq/products/cloud-computing/hardware-monitors/desktop-server-series/nct7802y/

Changed in v2:
- Removed nct7802,reg-init
- Added registers initialization by names

Introduced in v1:
- nct7802,reg-init
---
.../devicetree/bindings/hwmon/nct7802.txt | 77 ++++++++++++++++++++++
1 file changed, 77 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/nct7802.txt

diff --git a/Documentation/devicetree/bindings/hwmon/nct7802.txt b/Documentation/devicetree/bindings/hwmon/nct7802.txt
new file mode 100644
index 0000000..1619202
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nct7802.txt
@@ -0,0 +1,77 @@
+Nuvoton NCT7802Y Hardware Monitoring IC
+
+Required node properties:
+
+ - "compatible": must be "nuvoton,nct7802"
+ - "reg": I2C bus address of the device
+ - #address-cells=<1>;
+ - #size-cells=<0>;
+
+Optional subnodes:
+
+Sensor subnodes properties:
+ - "reg": index in range 0..2
+ - "compatible", allowed values:
+ - "nuvoton,nct7802"
+ - "sensor-type", allowed values:
+ "thermal-diode"
+ "thermistor"
+ "voltage"
+
+Except sensor at address 2 can't be "thermal-diode".
+
+Fan subnode:
+
+Required properties:
+ - "reg" :index of in range 0 .. 2.
+ - "compatible", should be "nuvoton,nct7802-fan"
+Optional boolean properties:
+ - "direct-current" :direct current powered fan instead default PWM
+ - "invert" :inverted polarity
+ - "open-drain" :open-drain output instead push pull
+
+Subnode "peci" properties:
+ - "reg" :index in range 0..1
+ - "compatible", should be "nuvoton,nct7802-peci"
+
+Subnode vcc properties:
+ - "compatible", should be "nuvoton,nct7802-vcc"
+
+Subnode vcore properties:
+ - "compatible", should be "nuvoton,nct7802-vcore"
+
+Not defined sensors, fans and PECI modules will be disabled.
+
+Example nct7802 node:
+
+nct7802 {
+ compatible = "nuvoton,nct7802";
+ reg = <0x2a>;
+ #address-cells=<1>;
+ #size-cells=<0>;
+ sensor@0 {
+ reg = <0>;
+ compatible = "nuvoton,nct7802";
+ sensor-type = "thermistor"
+ };
+ sensor@1 {
+ reg = <1>;
+ compatible = "nuvoton,nct7802";
+ sensor-type = "thermal-diode";
+ };
+ pwm-fan@0 {
+ reg = <0>;
+ compatible = "nuvoton,nct7802-fan";
+ };
+ dc-fan@1 {
+ reg = <1>;
+ compatible = "nuvoton,nct7802-fan";
+ dc;
+ invert;
+ open-drain;
+ };
+ peci@0 {
+ reg = <0>;
+ compatible = "nuvoton,nct7802-peci";
+ };
+};
--
1.9.1


\
 
 \ /
  Last update: 2015-10-24 01:21    [W:0.036 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site