lkml.org 
[lkml]   [2015]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/6] drm/vc4: Make sure that planes aren't scaled.
Date
We would scan out the memory around them if an upscale was attempted,
and would just scan out incorrectly for downscaling.

Signed-off-by: Eric Anholt <eric@anholt.net>
---

It looks like, while modetest only wants to set scaling on overlay
planes, one could do so on our primary/cursor planes if the fd was in
universal planes mode.

drivers/gpu/drm/vc4/vc4_plane.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index 2db5092..887f3ca 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -157,6 +157,16 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
int crtc_w = state->crtc_w;
int crtc_h = state->crtc_h;

+ if (state->crtc_w << 16 != state->src_w ||
+ state->crtc_h << 16 != state->src_h) {
+ /* We don't support scaling yet, which involves
+ * allocating the LBM memory for scaling temporary
+ * storage, and putting filter kernels in the HVS
+ * context.
+ */
+ return -EINVAL;
+ }
+
if (crtc_x < 0) {
offset += drm_format_plane_cpp(fb->pixel_format, 0) * -crtc_x;
crtc_w += crtc_x;
--
2.6.1


\
 
 \ /
  Last update: 2015-10-23 12:41    [W:0.047 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site