lkml.org 
[lkml]   [2015]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.19.y-ckt 068/156] PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
Date
3.19.8-ckt8 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Rui <rui.zhang@intel.com>

commit 91f15fb30c77d4a0d0d9b97e5cec647650853145 upstream.

On multi-function JMicron SATA/PATA/AHCI devices, the PATA controller at
function 1 doesn't work if it is powered on before the SATA controller at
function 0. The result is that PATA doesn't work after resume, and we
print messages like this:

pata_jmicron 0000:02:00.1: Refused to change power state, currently in D3
irq 17: nobody cared (try booting with the "irqpoll" option)

Async resume was introduced in v3.15 by 76569faa62c4 ("PM / sleep:
Asynchronous threads for resume_noirq"). Prior to that, we powered on
the functions in order, so this problem shouldn't happen.

e6b7e41cdd8c ("ata: Disabling the async PM for JMicron chip 363/361")
solved the problem for JMicron 361 and 363 devices. With async suspend
disabled, we always power on function 0 before function 1.

Barto then reported the same problem with a JMicron 368 (see comment #57 in
the bugzilla).

Rather than extending the blacklist piecemeal, disable async suspend for
all JMicron multi-function SATA/PATA/AHCI devices.

This quirk could stay in the ahci and pata_jmicron drivers, but it's likely
the problem will occur even if pata_jmicron isn't loaded until after the
suspend/resume. Making it a PCI quirk ensures that we'll preserve the
power-on order even if the drivers aren't loaded.

[bhelgaas: changelog, limit to multi-function, limit to IDE/ATA]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=81551
Reported-and-tested-by: Barto <mister.freeman@laposte.net>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
drivers/ata/ahci.c | 13 +------------
drivers/ata/pata_jmicron.c | 12 ------------
drivers/pci/quirks.c | 12 ++++++++++++
3 files changed, 13 insertions(+), 24 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index adce56f..c4ccf51 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -349,6 +349,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
/* JMicron 362B and 362C have an AHCI function with IDE class code */
{ PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr },
{ PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr },
+ /* May need to update quirk_jmicron_async_suspend() for additions */

/* ATI */
{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
@@ -1377,18 +1378,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000)
ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS;

- /*
- * The JMicron chip 361/363 contains one SATA controller and one
- * PATA controller,for powering on these both controllers, we must
- * follow the sequence one by one, otherwise one of them can not be
- * powered on successfully, so here we disable the async suspend
- * method for these chips.
- */
- if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
- (pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
- pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
- device_disable_async_suspend(&pdev->dev);
-
/* acquire resources */
rc = pcim_enable_device(pdev);
if (rc)
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 47e418b..4d1a5d2 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -143,18 +143,6 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
};
const struct ata_port_info *ppi[] = { &info, NULL };

- /*
- * The JMicron chip 361/363 contains one SATA controller and one
- * PATA controller,for powering on these both controllers, we must
- * follow the sequence one by one, otherwise one of them can not be
- * powered on successfully, so here we disable the async suspend
- * method for these chips.
- */
- if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
- (pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
- pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
- device_disable_async_suspend(&pdev->dev);
-
return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
}

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index cfa0f20..67dff79 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1576,6 +1576,18 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB3

#endif

+static void quirk_jmicron_async_suspend(struct pci_dev *dev)
+{
+ if (dev->multifunction) {
+ device_disable_async_suspend(&dev->dev);
+ dev_info(&dev->dev, "async suspend disabled to avoid multi-function power-on ordering issue\n");
+ }
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, 8, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x2362, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x236f, quirk_jmicron_async_suspend);
+
#ifdef CONFIG_X86_IO_APIC
static void quirk_alder_ioapic(struct pci_dev *pdev)
{
--
1.9.1


\
 
 \ /
  Last update: 2015-10-21 00:41    [W:0.392 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site