lkml.org 
[lkml]   [2015]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] clk: ti: dflt: fix enable_reg validity check
From
Date
On 09/30/2015 01:37 AM, Suman Anna wrote:
> The default clock enabling functions for TI clocks -
> omap2_dflt_clk_enable() and omap2_dflt_clk_disable() perform a
> NULL check for the enable_reg field of the clk_hw_omap structure.
> This enable_reg field however is merely a combination of the index
> of the master IP module, and the offset from the master IP module's
> base address. A value of 0 is perfectly valid, and the current error
> checking will fail in these cases. The issue was found when trying
> to enable the iva2_ck clock on OMAP3 platforms.
>
> So, switch the check to use IS_ERR. This correction is similar to the
> logic used in commit c807dbedb5e5 ("clk: ti: fix ti_clk_get_reg_addr
> error handling").
>
> Signed-off-by: Suman Anna <s-anna@ti.com>
> ---
> Hi Tero,
>
> Patch done against 4.3-rc3. There are couple of similar checks in
> drivers/clk/ti/clockdomain.c, but those seem to be ok. This is
> a non-urgent fix, as there are currently no active users of
> iva2_ck in the kernel (the MMU node is disabled in DT atm).
>
> Boot tested on OMAP3 Beagle-XM, AM437x GP EVM, AM335x BeagleBone
> Black, OMAP4 Panda, OMAP5 uEVM and DRA7 Beagle-X15 boards.
>
> regards
> Suman
>
> Following is the error log from a unit test of the IVA MMU on OMAP3 using
> some additional patch to enable the DTS node,
>
> [ 86.626342] omap_iommu_test_init: iommu_test_init entered
> [ 86.632080] omap_iommu_test iommu_test: Enabling IOMMU...
> [ 86.647460] omap_iommu_test iommu_test: testing IOMMU 5d000000.mmu
> [ 86.654815] omap2_dflt_clk_enable: iva2_ck missing enable_reg
> [ 86.680938] ------------[ cut here ]------------
> [ 86.685821] WARNING: CPU: 0 PID: 910 at drivers/clk/clk.c:675 clk_disable+0x28/0x34()
> [ 86.694091] Modules linked in: iommu_dt_test(O+)
> [ 86.698974] CPU: 0 PID: 910 Comm: insmod Tainted: G O 4.3.0-rc3-00008-g61458979cbbe #40
> [ 86.708618] Hardware name: Generic OMAP36xx (Flattened Device Tree)
> [ 86.715240] [<c0017b44>] (unwind_backtrace) from [<c0013eac>] (show_stack+0x10/0x14)
> [ 86.723419] [<c0013eac>] (show_stack) from [<c0342a04>] (dump_stack+0x84/0x9c)
> [ 86.731048] [<c0342a04>] (dump_stack) from [<c003e924>] (warn_slowpath_common+0x78/0xb4)
> [ 86.739593] [<c003e924>] (warn_slowpath_common) from [<c003e9fc>] (warn_slowpath_null+0x1c/0x24)
> [ 86.748870] [<c003e9fc>] (warn_slowpath_null) from [<c04fe4c8>] (clk_disable+0x28/0x34)
> [ 86.757324] [<c04fe4c8>] (clk_disable) from [<c0027da0>] (_disable_clocks+0x18/0x68)
> [ 86.765502] [<c0027da0>] (_disable_clocks) from [<c0029cd0>] (omap_hwmod_deassert_hardreset+0xc8/0x180)
> [ 86.775421] [<c0029cd0>] (omap_hwmod_deassert_hardreset) from [<c002a7cc>] (omap_device_deassert_hardreset+0x34/
> 0x54)
> [ 86.786621] [<c002a7cc>] (omap_device_deassert_hardreset) from [<c03d91f4>] (omap_iommu_attach_dev+0xbc/0x1fc)
> [ 86.797180] [<c03d91f4>] (omap_iommu_attach_dev) from [<c03d5f9c>] (__iommu_attach_device+0x1c/0x80)
> [ 86.806854] [<c03d5f9c>] (__iommu_attach_device) from [<bf000150>] (omap_iommu_test_probe+0xd0/0x21c [iommu_dt_t
> est])
> [ 86.818054] [<bf000150>] (omap_iommu_test_probe [iommu_dt_test]) from [<c03e03ec>] (platform_drv_probe+0x44/0xa4
> )
> [ 86.828857] [<c03e03ec>] (platform_drv_probe) from [<c03de9b0>] (driver_probe_device+0x1f4/0x2f0)
> [ 86.838195] [<c03de9b0>] (driver_probe_device) from [<c03deb40>] (__driver_attach+0x94/0x98)
> [ 86.847045] [<c03deb40>] (__driver_attach) from [<c03dce34>] (bus_for_each_dev+0x6c/0xa0)
> [ 86.855651] [<c03dce34>] (bus_for_each_dev) from [<c03de0d4>] (bus_add_driver+0x18c/0x214)
> [ 86.864349] [<c03de0d4>] (bus_add_driver) from [<c03df494>] (driver_register+0x78/0xf8)
> [ 86.872772] [<c03df494>] (driver_register) from [<c0009804>] (do_one_initcall+0x80/0x1dc)
> [ 86.881378] [<c0009804>] (do_one_initcall) from [<c0118b60>] (do_init_module+0x5c/0x1d0)
> [ 86.889892] [<c0118b60>] (do_init_module) from [<c00cabf4>] (load_module+0x1818/0x1f70)
> [ 86.898315] [<c00cabf4>] (load_module) from [<c00cb428>] (SyS_init_module+0xdc/0x14c)
> [ 86.906555] [<c00cb428>] (SyS_init_module) from [<c000f6e0>] (ret_fast_syscall+0x0/0x1c)
> [ 86.915039] ---[ end trace 49b229a4289ab8b2 ]---
> [ 86.919891] omap_hwmod: mmu_iva: failed to hardreset
> [ 86.925384] omap-iommu 5d000000.mmu: deassert_reset failed: -16
> [ 86.931640] omap_iommu_test iommu_test: can't get omap iommu: -16
> [ 86.938140] omap_iommu_test iommu_test: can't attach iommu device: -16
> [ 86.945068] omap_iommu_test_init failed, ret = -16
>
> drivers/clk/ti/clkt_dflt.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)

Queued for 4.3-rc-fixes thanks, as I have other patches to push for that.

-Tero

>
> diff --git a/drivers/clk/ti/clkt_dflt.c b/drivers/clk/ti/clkt_dflt.c
> index 90d7d8a21c49..1ddc288fce4e 100644
> --- a/drivers/clk/ti/clkt_dflt.c
> +++ b/drivers/clk/ti/clkt_dflt.c
> @@ -222,7 +222,7 @@ int omap2_dflt_clk_enable(struct clk_hw *hw)
> }
> }
>
> - if (unlikely(!clk->enable_reg)) {
> + if (unlikely(IS_ERR(clk->enable_reg))) {
> pr_err("%s: %s missing enable_reg\n", __func__,
> clk_hw_get_name(hw));
> ret = -EINVAL;
> @@ -264,7 +264,7 @@ void omap2_dflt_clk_disable(struct clk_hw *hw)
> u32 v;
>
> clk = to_clk_hw_omap(hw);
> - if (!clk->enable_reg) {
> + if (IS_ERR(clk->enable_reg)) {
> /*
> * 'independent' here refers to a clock which is not
> * controlled by its parent.
>



\
 
 \ /
  Last update: 2015-10-02 09:01    [W:0.053 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site