lkml.org 
[lkml]   [2015]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/3] leds: add device trigger
On 10/02 16:27, Jacek Anaszewski wrote:
> Hi Maciek,
>
> I tested your trigger, and it works fine, but I wonder if
> it really improves the things.
>
> Basically, similarly as Josh, I have doubts related to associating
> triggers with dev_t. It requires from user to figure out how they can
> obtain valid dev_t. For example, in case of v4l2 jpeg codec, I had to
> spend some time looking for the location of struct device containing
> dev_t related to the exposed encoder and decoder nodes, whereas addition
> of debugging instruction should be easy and intuitive.
>
> It is much simpler to register a trigger with human readable names.
> What is more, use of dev_t makes the user thinking that there is
> some mechanism involved, that automatically associates device with
> trigger, and after some time of code investigation one gets
> disillusioned and realizes that dev_t is used only to uniquely identify
> registered triggers.
>
> I tried to add trigger to the JPEG codec interrupt handler using
> ledtrig-oneshot, and below is the result:
>
> diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c
> b/drivers/media/platform/s5p-jpeg/jpeg-core.c
> index 9690f9d..af826d3 100644
> --- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
> +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
> @@ -28,6 +28,7 @@
> #include <media/v4l2-ioctl.h>
> #include <media/videobuf2-core.h>
> #include <media/videobuf2-dma-contig.h>
> +#include <linux/leds.h>
>
> #include "jpeg-core.h"
> #include "jpeg-hw-s5p.h"
> @@ -35,6 +36,9 @@
> #include "jpeg-hw-exynos3250.h"
> #include "jpeg-regs.h"
>
> +static unsigned long blink_delay = 30;
> +struct led_trigger *jpeg_led_trig;
> +
> static struct s5p_jpeg_fmt sjpeg_formats[] = {
> {
> .name = "JPEG JFIF",
> @@ -2318,6 +2322,7 @@ static irqreturn_t s5p_jpeg_irq(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> +
> static irqreturn_t exynos4_jpeg_irq(int irq, void *priv)
> {
> unsigned int int_status;
> @@ -2375,7 +2380,10 @@ static irqreturn_t exynos4_jpeg_irq(int irq, void
> *priv)
> v4l2_m2m_job_finish(jpeg->m2m_dev, curr_ctx->fh.m2m_ctx);
> curr_ctx->subsampling = exynos4_jpeg_get_frame_fmt(jpeg->regs);
>
> + led_trigger_blink_oneshot(jpeg_led_trig, &blink_delay, &blink_delay,
> 0);
> +
> spin_unlock(&jpeg->slock);
> +
> return IRQ_HANDLED;
> }
>
> @@ -2589,6 +2597,8 @@ static int s5p_jpeg_probe(struct platform_device
> *pdev)
>
> v4l2_info(&jpeg->v4l2_dev, "Samsung S5P JPEG codec\n");
>
> + led_trigger_register_simple("jpeg-trig", &jpeg_led_trig);
> +
> return 0;
>
> enc_vdev_register_rollback:
> @@ -2633,6 +2643,8 @@ static int s5p_jpeg_remove(struct platform_device
> *pdev)
> if (!IS_ERR(jpeg->sclk))
> clk_put(jpeg->sclk);
>
> + led_trigger_unregister_simple(jpeg_led_trig);
> +
> return 0;
> }
>
> It needs addition of 6 lines of code versus 2 lines in case
> of ledtrig-device. Not a big deal, taking into account that we
> don't have to spend additional time looking for the suitable
> struct device.
>
> Please note that in case of drivers that expose many dev nodes,
> there are cases like interrupt handlers, where struct device
> can't be automatically retrieved, but it needs additional
> analysis to find out which dev node given call to ISR referes to.
> In this case we would have to check current mode (encoding/decoding)
> and call either
>
> ledtrig_dev_activity(jpeg->vfd_encoder->dev.devt)
> or
> ledtrig_dev_activity(jpeg->vfd_decoder->dev.devt).
>
>
> When comparing the steps required from user space side to activate
> the triggers, it looks as follows:
>
>
> ledtrig-oneshot (we have one trigger for encoding and decoding mode):
> =================
> #cd /sys/class/leds/aat1290
> #cat triggers
> #[none] jpeg-trig
> #echo "jpeg-trig" > trigger
>
> ledtrig-dev approach (we have to define trigger per dev_t, we choose
> encoder):
> =====================
> #grep . /sys/class/video4linux/video*/name
> #/sys/class/video4linux/video7/name:s5p-jpeg-enc
> #/sys/class/video4linux/video8/name:s5p-jpeg-dec
> #ls -l /dev/video7
> #crw-rw---T 1 root video 81, 8 Jan 1 03:32 /dev/video8
> #echo "81:7" > /sys/kernel/debug/ledtrig-dev/register
> #cd /sys/class/leds/aat1290
> #cat triggers
> #[none] dev-81:7
> #echo "dev-81:7" > trigger
>
> It seems that ledtrig-dev is more troublesome in use.
>
> Please let me know if I missed something.
>

Thanks for your comments. You've raised some fair points.

Although my use case is a bit different (multiple serial ports, each
with a LED, port <-> LED mapping is user configurable, hooks at tty
layer), I may have unnecessarily overengineered the solution. Indeed
simply patching driver structures with `struct led_trigger` will work as
well.

Regards,
--
Maciek Borzecki


\
 
 \ /
  Last update: 2015-10-02 19:01    [W:0.148 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site