lkml.org 
[lkml]   [2015]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/4] Documentation: tps65086: Add DT bindings for the TPS65086 PMIC
On Mon, 19 Oct 2015, Andrew F. Davis wrote:

> On 10/19/2015 04:13 AM, Lee Jones wrote:
> >On Fri, 16 Oct 2015, Andrew F. Davis wrote:
> >
> >>The TPS65086 PMIC contains several regulators and a GPO controller.
> >>Add bindings for the TPS65086 PMIC.
> >>
> >>Signed-off-by: Andrew F. Davis <afd@ti.com>
> >>---
> >> .../devicetree/bindings/gpio/gpio-tps65086.txt | 17 ++++++++
> >> Documentation/devicetree/bindings/mfd/tps65086.txt | 46 ++++++++++++++++++++++
> >> .../bindings/regulator/tps65086-regulator.txt | 36 +++++++++++++++++
> >
> >Please split these up into separate patches.
> >
> >There is no functional reason to bundle them up.
> >
>
> ACK
>
> >> 3 files changed, 99 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65086.txt
> >> create mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt
> >> create mode 100644 Documentation/devicetree/bindings/regulator/tps65086-regulator.txt
> >
> >[...]
> >
> >>diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
> >>new file mode 100644
> >>index 0000000..4b6aeb4
> >>--- /dev/null
> >>+++ b/Documentation/devicetree/bindings/mfd/tps65086.txt
> >>@@ -0,0 +1,46 @@
> >>+* TPS65086 Power Management Integrated Circuit bindings
> >>+
> >>+Required properties:
> >>+ - compatible : Should be "ti,tps65086".
> >
> >Any indication that it's a PMIC?
> >
>
> In the compatible string?

Ya.

> >>+ - reg : Slave address.
> >
> >I2C/SPI?
> >
>
> ACK
>
> >>+ - interrupt-parent : The parent interrupt controller.
> >
> >Phandled to ...
> >
>
> ACK
>
> >>+ - interrupts : The interrupt line the device is connected to.
> >>+ - interrupt-controller : Marks the device node as an interrupt controller.
> >>+ - #interrupt-cells : The number of cells to describe an IRQ, this
> >>+ should be 2. The first cell is the IRQ number.
> >>+ The second cell is the flags, encoded as the trigger
> >>+ masks from ../interrupt-controller/interrupts.txt.
> >
> >Masks? What masks?
> >
> >Best to make a link to the header where the flags are defined here.
> >
>
> ACK
>
> >>+Additional nodes defined in:
> >>+ - Regulators : ../regulator/tps65086-regulator.txt.
> >>+ - GPIO : ../gpio/gpio-tps65086.txt.
> >
> >I'd suggest removing the full stops from all of the lines above.
> >
> >Just treat them as bullet points like we normally do.
> >
>
> ACK
>
> >>+Example:
> >>+
> >>+ pmic: tps65086@5e {
> >>+ compatible = "ti,tps65086";
> >>+ reg = <0x5e>;
> >>+ interrupt-parent = <&gpio1>;
> >>+ interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> >>+ interrupt-controller;
> >>+ #interrupt-cells = <2>;
> >>+
> >>+ regulators {
> >>+ compatible = "ti,tps65086-regulator";
> >>+
> >>+ buck1 {
> >>+ regulator-name = "vcc1";
> >>+ regulator-min-microvolt = <1600000>;
> >>+ regulator-max-microvolt = <1600000>;
> >>+ regulator-boot-on;
> >>+ ti,regulator-decay;
> >>+ ti,regulator-step-size-25mv;
> >>+ };
> >>+ };
> >>+
> >>+ gpio4: tps65086_gpio {
> >>+ compatible = "ti,tps65086-gpio";
> >>+ gpio-controller;
> >>+ #gpio-cells = <2>;
> >>+ };
> >>+ };
> >
> >[...]
> >
>

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog


\
 
 \ /
  Last update: 2015-10-19 17:41    [W:0.061 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site