lkml.org 
[lkml]   [2015]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Subjectperf documentation (was Re: [PATCH v3 3/6] ARCv2: perf: Support sampling events using overflow interrupts)
From
Date
On Wednesday 26 August 2015 07:55 PM, Peter Zijlstra wrote:
> On Wed, Aug 26, 2015 at 03:12:25PM +0200, Peter Zijlstra wrote:
>> On Mon, Aug 24, 2015 at 05:20:20PM +0300, Alexey Brodkin wrote:
>>> @@ -295,6 +317,16 @@ static int arc_pmu_add(struct perf_event *event, int flags)
>>> }
>>>
>>> write_aux_reg(ARC_REG_PCT_INDEX, idx);
>>> +
>>> + arc_pmu->act_counter[idx] = event;
>>> +
>>> + if (is_sampling_event(event)) {
>>> + /* Mimic full counter overflow as other arches do */
>>> + write_aux_reg(ARC_REG_PCT_INT_CNTL, (u32)arc_pmu->max_period);
>>> + write_aux_reg(ARC_REG_PCT_INT_CNTH,
>>> + (arc_pmu->max_period >> 32));
>>> + }
>>> +
>>
>> pmu::add should call pmu::start when PERF_EF_START, without that it
>> should not start the counter, only schedule it.
>>
>> (although currently all pmu::add() calls will have EF_START set)
>>
>>> write_aux_reg(ARC_REG_PCT_CONFIG, 0);
>>> write_aux_reg(ARC_REG_PCT_COUNTL, 0);
>>> write_aux_reg(ARC_REG_PCT_COUNTH, 0);
>
> Does the below clarify things a bit? If there's still some uncertainty
> please say what/where and I'll try and expand.


Peter this is awesome documentation and would be a shame to get lost in lkml
archives. Can it please make it's way into git :-)

>
>
>
> ---
> include/linux/perf_event.h | 100 +++++++++++++++++++++++++++++++++++++++------
> 1 file changed, 87 insertions(+), 13 deletions(-)
>
> diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
> index 2027809433b3..8f78a0b7bfe5 100644
> --- a/include/linux/perf_event.h
> +++ b/include/linux/perf_event.h
> @@ -140,27 +140,60 @@ struct hw_perf_event {
> };
> #endif
> };
> + /*
> + * If the event is a per task event, this will point to the task in
> + * question. See the comment in perf_event_alloc().
> + */
> struct task_struct *target;
> +
> +/*
> + * hw_perf_event::state flags; used to track the PERF_EF_* state.
> + */
> +#define PERF_HES_STOPPED 0x01 /* the counter is stopped */
> +#define PERF_HES_UPTODATE 0x02 /* event->count up-to-date */
> +#define PERF_HES_ARCH 0x04
> +
> int state;
> +
> + /*
> + * The last observed hardware counter value, updated with a
> + * local64_cmpxchg() such that pmu::read() can be called nested.
> + */
> local64_t prev_count;
> +
> + /*
> + * The period to start the next sample with.
> + */
> u64 sample_period;
> +
> + /*
> + * The period we started this sample with.
> + */
> u64 last_period;
> +
> + /*
> + * However much is left of the current period; note that this is
> + * a full 64bit value and allows for generation of periods longer
> + * than hardware might allow.
> + */
> local64_t period_left;
> +
> + /*
> + * State for throttling the event, see __perf_event_overflow() and
> + * perf_adjust_freq_unthr_context().
> + */
> u64 interrupts_seq;
> u64 interrupts;
>
> + /*
> + * State for freq target events, see __perf_event_overflow() and
> + * perf_adjust_freq_unthr_context().
> + */
> u64 freq_time_stamp;
> u64 freq_count_stamp;
> #endif
> };
>
> -/*
> - * hw_perf_event::state flags
> - */
> -#define PERF_HES_STOPPED 0x01 /* the counter is stopped */
> -#define PERF_HES_UPTODATE 0x02 /* event->count up-to-date */
> -#define PERF_HES_ARCH 0x04
> -
> struct perf_event;
>
> /*
> @@ -210,7 +243,19 @@ struct pmu {
>
> /*
> * Try and initialize the event for this PMU.
> - * Should return -ENOENT when the @event doesn't match this PMU.
> + *
> + * Returns:
> + * -ENOENT -- @event is not for this PMU
> + *
> + * -ENODEV -- @event is for this PMU but PMU not present
> + * -EBUSY -- @event is for this PMU but PMU temporarily unavailable
> + * -EINVAL -- @event is for this PMU but @event is not valid
> + * -EOPNOTSUPP -- @event is for this PMU, @event is valid, but not supported
> + * -EACCESS -- @event is for this PMU, @event is valid, but no privilidges
> + *
> + * 0 -- @event is for this PMU and valid
> + *
> + * Other error return values are allowed.
> */
> int (*event_init) (struct perf_event *event);
>
> @@ -221,27 +266,56 @@ struct pmu {
> void (*event_mapped) (struct perf_event *event); /*optional*/
> void (*event_unmapped) (struct perf_event *event); /*optional*/
>
> + /*
> + * Flags for ->add()/->del()/ ->start()/->stop(). There are
> + * matching hw_perf_event::state flags.
> + */
> #define PERF_EF_START 0x01 /* start the counter when adding */
> #define PERF_EF_RELOAD 0x02 /* reload the counter when starting */
> #define PERF_EF_UPDATE 0x04 /* update the counter when stopping */
>
> /*
> - * Adds/Removes a counter to/from the PMU, can be done inside
> - * a transaction, see the ->*_txn() methods.
> + * Adds/Removes a counter to/from the PMU, can be done inside a
> + * transaction, see the ->*_txn() methods.
> + *
> + * The add/del callbacks will reserve all hardware resources required
> + * to service the event, this includes any counter constraint
> + * scheduling etc.
> + *
> + * Called with IRQs disabled and the PMU disabled.
> + *
> + * ->add() called without PERF_EF_START should result in the same state
> + * as ->add() followed by ->stop().
> + *
> + * ->del() must always PERF_EF_UPDATE stop an event. If it calls
> + * ->stop() that must deal with already being stopped without
> + * PERF_EF_UPDATE.
> */
> int (*add) (struct perf_event *event, int flags);
> void (*del) (struct perf_event *event, int flags);
>
> /*
> - * Starts/Stops a counter present on the PMU. The PMI handler
> - * should stop the counter when perf_event_overflow() returns
> - * !0. ->start() will be used to continue.
> + * Starts/Stops a counter present on the PMU.
> + *
> + * The PMI handler should stop the counter when perf_event_overflow()
> + * returns !0. ->start() will be used to continue.
> + *
> + * Also used to change the sample period.
> + *
> + * ->stop() with PERF_EF_UPDATE will read the counter and update
> + * period/count values like ->read() would.
> + *
> + * ->start() with PERF_EF_RELOAD will reprogram the the counter
> + * value, must be preceded by a ->stop() with PERF_EF_UPDATE.
> */
> void (*start) (struct perf_event *event, int flags);
> void (*stop) (struct perf_event *event, int flags);
>
> /*
> * Updates the counter value of the event.
> + *
> + * For sampling capable PMUs this will also update the software period
> + * hw_perf_event::period_left field.
> */
> void (*read) (struct perf_event *event);
>
>



\
 
 \ /
  Last update: 2015-10-19 12:21    [W:0.061 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site