lkml.org 
[lkml]   [2015]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] drivers: net: cpsw: add phy-handle parsing
Date
add the ability to parse "phy-handle". This
is needed for phys, which have a DT node, and
need to parse DT properties.

Signed-off-by: Heiko Schocher <hs@denx.de>
---

Changes in v2: None

Documentation/devicetree/bindings/net/cpsw.txt | 1 +
drivers/net/ethernet/ti/cpsw.c | 15 +++++++++++----
2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index a9df21a..a2cae4e 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -39,6 +39,7 @@ Required properties:
Optional properties:
- dual_emac_res_vlan : Specifies VID to be used to segregate the ports
- mac-address : See ethernet.txt file in the same directory
+- phy-handle : See ethernet.txt file in the same directory

Note: "ti,hwmods" field is used to fetch the base address and irq
resources from TI, omap hwmod data base during device registration.
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 8fc90f1..874fb29 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -30,6 +30,7 @@
#include <linux/delay.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
+#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/of_device.h>
#include <linux/if_vlan.h>
@@ -365,6 +366,7 @@ struct cpsw_priv {
spinlock_t lock;
struct platform_device *pdev;
struct net_device *ndev;
+ struct device_node *phy_node;
struct napi_struct napi_rx;
struct napi_struct napi_tx;
struct device *dev;
@@ -1145,7 +1147,11 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast,
1 << slave_port, 0, 0, ALE_MCAST_FWD_2);

- slave->phy = phy_connect(priv->ndev, slave->data->phy_id,
+ if (priv->phy_node)
+ slave->phy = of_phy_connect(priv->ndev, priv->phy_node,
+ &cpsw_adjust_link, 0, slave->data->phy_if);
+ else
+ slave->phy = phy_connect(priv->ndev, slave->data->phy_id,
&cpsw_adjust_link, slave->data->phy_if);
if (IS_ERR(slave->phy)) {
dev_err(priv->dev, "phy %s not found on slave %d\n",
@@ -1934,11 +1940,12 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv,
slave->port_vlan = data->dual_emac_res_vlan;
}

-static int cpsw_probe_dt(struct cpsw_platform_data *data,
+static int cpsw_probe_dt(struct cpsw_priv *priv,
struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct device_node *slave_node;
+ struct cpsw_platform_data *data = &priv->data;
int i = 0, ret;
u32 prop;

@@ -2029,6 +2036,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
if (strcmp(slave_node->name, "slave"))
continue;

+ priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0);
parp = of_get_property(slave_node, "phy_id", &lenp);
if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) {
dev_err(&pdev->dev, "Missing slave[%d] phy_id property\n", i);
@@ -2044,7 +2052,6 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
}
snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
PHY_ID_FMT, mdio->name, phyid);
-
slave_data->phy_if = of_get_phy_mode(slave_node);
if (slave_data->phy_if < 0) {
dev_err(&pdev->dev, "Missing or malformed slave[%d] phy-mode property\n",
@@ -2240,7 +2247,7 @@ static int cpsw_probe(struct platform_device *pdev)
/* Select default pin state */
pinctrl_pm_select_default_state(&pdev->dev);

- if (cpsw_probe_dt(&priv->data, pdev)) {
+ if (cpsw_probe_dt(priv, pdev)) {
dev_err(&pdev->dev, "cpsw: platform data missing\n");
ret = -ENODEV;
goto clean_runtime_disable_ret;
--
2.1.0


\
 
 \ /
  Last update: 2015-10-17 06:41    [W:0.053 / U:1.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site