lkml.org 
[lkml]   [2015]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] pinctrl: mvebu: armada-38x: add suspend/resume support
On Sat, Oct 17, 2015 at 11:28:48PM +0200, Marcin Wojtas wrote:
> diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-38x.c b/drivers/pinctrl/mvebu/pinctrl-armada-38x.c
> index 6ec82c6..094cb48 100644
> --- a/drivers/pinctrl/mvebu/pinctrl-armada-38x.c
> +++ b/drivers/pinctrl/mvebu/pinctrl-armada-38x.c
> @@ -23,6 +23,7 @@
> #include "pinctrl-mvebu.h"
>
> static void __iomem *mpp_base;
> +static u32 *mpp_saved_regs;

I'm not a fan of unnecessary global variables. It adds to the bulk of
the kernel when built-in (even though it's in .bss, it still has a cost)
and these all add up when built-in.

Please make it part of the driver data allocated at probe time.

> static int armada_38x_mpp_ctrl_get(unsigned pid, unsigned long *config)
> {
> @@ -424,6 +425,7 @@ static int armada_38x_pinctrl_probe(struct platform_device *pdev)
> const struct of_device_id *match =
> of_match_device(armada_38x_pinctrl_of_match, &pdev->dev);
> struct resource *res;
> + int nregs;
>
> if (!match)
> return -ENODEV;
> @@ -441,11 +443,44 @@ static int armada_38x_pinctrl_probe(struct platform_device *pdev)
> soc->modes = armada_38x_mpp_modes;
> soc->nmodes = armada_38x_mpp_controls[0].npins;
>
> + nregs = DIV_ROUND_UP(soc->nmodes, MVEBU_MPPS_PER_REG);
> +
> + mpp_saved_regs = devm_kcalloc(&pdev->dev, nregs, sizeof(u32),
> + GFP_KERNEL);
> + if (!mpp_saved_regs)
> + return -ENOMEM;
> +
> pdev->dev.platform_data = soc;

The 'soc' is stored in platform data, not driver data, but...

>
> return mvebu_pinctrl_probe(pdev);
> }
>
> +int armada_38x_pinctrl_suspend(struct platform_device *pdev, pm_message_t state)
> +{
> + struct mvebu_pinctrl_soc_info *soc = platform_get_drvdata(pdev);

You access it through driver data. Isn't the driver data here a
struct mvebu_pinctrl pointer? See platform_set_drvdata() in
mvebu_pinctrl_probe().

> + int i, nregs;
> +
> + nregs = DIV_ROUND_UP(soc->nmodes, MVEBU_MPPS_PER_REG);
> +
> + for (i = 0; i < nregs; i++)
> + mpp_saved_regs[i] = readl(mpp_base + i * 4);
> +
> + return 0;
> +}
> +
> +int armada_38x_pinctrl_resume(struct platform_device *pdev)
> +{
> + struct mvebu_pinctrl_soc_info *soc = platform_get_drvdata(pdev);

Ditto.

--
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.


\
 
 \ /
  Last update: 2015-10-18 00:41    [W:0.181 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site