lkml.org 
[lkml]   [2015]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] net: phy: smsc: disable energy detect mode
Date
On some boards the energy enable detect mode leads in
trouble with some switches, so make the enabling of
this mode configurable through DT.

Signed-off-by: Heiko Schocher <hs@denx.de>
---

Changes in v2:
- add comments from Florian Fainelli
- I did not change disable property name into enable
because I fear to break existing behaviour
- add smsc vendor prefix
- remove CONFIG_OF and use __maybe_unused
- introduce "phy-handle" ability into ti,cpsw
driver, so I can remove bogus:
if (!of_node && dev->parent->of_node)
of_node = dev->parent->of_node;
construct. Therefore new patch for the ti,cpsw
driver is necessary.

.../devicetree/bindings/net/smsc-lan87xx.txt | 24 ++++++++++++++++++++++
drivers/net/phy/smsc.c | 19 ++++++++++++-----
2 files changed, 38 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/smsc-lan87xx.txt

diff --git a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
new file mode 100644
index 0000000..974edd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
@@ -0,0 +1,24 @@
+SMSC LAN87xx Ethernet PHY
+
+Some boards require special tuning values. Configure them
+through an Ethernet OF device node.
+
+Optional properties:
+
+- smsc,disable-energy-detect:
+ If set, do not enable energy detect mode for the SMSC phy.
+ default: enable energy detect mode
+
+Examples:
+smsc phy with disabled energy detect mode on an am335x based board.
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+
+ ethernetphy0: ethernet-phy@0 {
+ reg = <0>;
+ smsc,disable-energy-detect;
+ };
+};
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 70b0895..dc2da87 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -43,16 +43,25 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev)

static int smsc_phy_config_init(struct phy_device *phydev)
{
+ int __maybe_unused len;
+ struct device *dev __maybe_unused = &phydev->dev;
+ struct device_node *of_node __maybe_unused = dev->of_node;
int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+ int enable_energy = 1;

if (rc < 0)
return rc;

- /* Enable energy detect mode for this SMSC Transceivers */
- rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
- rc | MII_LAN83C185_EDPWRDOWN);
- if (rc < 0)
- return rc;
+ if (of_find_property(of_node, "smsc,disable-energy-detect", &len))
+ enable_energy = 0;
+
+ if (enable_energy) {
+ /* Enable energy detect mode for this SMSC Transceivers */
+ rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
+ rc | MII_LAN83C185_EDPWRDOWN);
+ if (rc < 0)
+ return rc;
+ }

return smsc_phy_ack_interrupt(phydev);
}
--
2.1.0


\
 
 \ /
  Last update: 2015-10-17 06:41    [W:0.080 / U:4.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site