[lkml]   [2015]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/2] net, phy, smsc: add posibility to disable energy detect mode
On some boards the energy enable detect mode leads in
trouble with some switches, so make the enabling of
this mode configurable through DT.
Therefore the property "smsc,disable-energy-detect" is

Patch 1 introduces phy-handle support for the ti,cpsw
driver. This is needed now for the smsc phy.

Patch 2 adds the disable energy mode functionality
to the smsc phy

Changes in v2:
- add comments from Florian Fainelli
- I did not change disable property name into enable
because I fear to break existing behaviour
- add smsc vendor prefix
- remove CONFIG_OF and use __maybe_unused
- introduce "phy-handle" ability into ti,cpsw
driver, so I can remove bogus:
if (!of_node && dev->parent->of_node)
of_node = dev->parent->of_node;
construct. Therefore new patch for the ti,cpsw
driver is necessary.

Heiko Schocher (2):
drivers: net: cpsw: add phy-handle parsing
net: phy: smsc: disable energy detect mode

Documentation/devicetree/bindings/net/cpsw.txt | 1 +
.../devicetree/bindings/net/smsc-lan87xx.txt | 24 ++++++++++++++++++++++
drivers/net/ethernet/ti/cpsw.c | 15 ++++++++++----
drivers/net/phy/smsc.c | 19 ++++++++++++-----
4 files changed, 50 insertions(+), 9 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/smsc-lan87xx.txt


 \ /
  Last update: 2015-10-17 06:41    [W:0.048 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site