lkml.org 
[lkml]   [2015]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH v2 2/4] mtd: nand: Allow MTD_NAND_BRCMNAND to be selected for ARM64
    From
    Date
    This patch is the same. I thought it has already been merged by Brian?

    On 10/16/2015 2:08 AM, Anup Patel wrote:
    > The BRCM NAND driver can be re-used for Broadcom ARM64 SoCs hence
    > this patch updates Kconfig to allow selection of MTD_NAND_BRCMNAND
    > for ARM64.
    >
    > Signed-off-by: Anup Patel <anup.patel@broadcom.com>
    > Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
    > Reviewed-by: Ray Jui <rjui@broadcom.com>
    > Reviewed-by: Pramod KUMAR <pramodku@broadcom.com>
    > Reviewed-by: Scott Branden <sbranden@broadcom.com>
    > ---
    > drivers/mtd/nand/Kconfig | 2 +-
    > 1 file changed, 1 insertion(+), 1 deletion(-)
    >
    > diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
    > index 3324281..a1b5819 100644
    > --- a/drivers/mtd/nand/Kconfig
    > +++ b/drivers/mtd/nand/Kconfig
    > @@ -393,7 +393,7 @@ config MTD_NAND_GPMI_NAND
    >
    > config MTD_NAND_BRCMNAND
    > tristate "Broadcom STB NAND controller"
    > - depends on ARM || MIPS
    > + depends on ARM || ARM64 || MIPS
    > help
    > Enables the Broadcom NAND controller driver. The controller was
    > originally designed for Set-Top Box but is used on various BCM7xxx,
    >


    \
     
     \ /
      Last update: 2015-10-16 18:01    [W:3.058 / U:0.344 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site