lkml.org 
[lkml]   [2015]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] rtc: pcf8563: add CLKOUT to common clock framework
On 16/10/2015 at 12:54:46 +0200, Alexandre Belloni wrote :
> > +static struct clk *pcf8563_clkout_register_clk(struct pcf8563 *pcf8563)
> > +{
> > + struct i2c_client *client = pcf8563->client;
> > + struct device_node *node = client->dev.of_node;
> > + struct clk *clk;
> > + struct clk_init_data init;
> > + int ret;
> > + unsigned char buf;
> > +
> > + /* disable the clkout output */
> > + buf = 0;
> > + ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf);
> > + if (ret < 0)
> > + return ERR_PTR(ret);
> > +
>
> Isn't that done automatically for an unused clock? However, I would do
> that in the probe as you will have to sprinkle some #ifdef
> CONFIG_COMMON_CLK after seeing the kbuild report.

I'm rethinking about your comment about breaking existing boards. I'd
say that probably nobody is using the output from the rtc but maybe
(highly unlikely) some are configuring it from the bootloader and in
that case it is not nice to undo that configuration. Let's keep that
block here as long as it works fine for you.

--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2015-10-16 13:21    [W:0.073 / U:0.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site