lkml.org 
[lkml]   [2015]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] ARM: BCM: Add SMP support for Broadcom NSP
From
Date
On 10/15/2015 06:10 PM, Kapil Hali wrote:
>
>
> On 10/15/2015 3:56 AM, Hauke Mehrtens wrote:
>> On 10/14/2015 07:47 PM, Kapil Hali wrote:
>>> Add SMP support for Broadcom's Northstar Plus SoC,
>>> cpu enable method and pen_release procedures. This
>>> changes also consolidates iProc family's - BCM NSP
>>> and BCM Kona, SMP handling in a common file.
>>
>> This will probably also work on normal Northstar CPUs without changes.
>>
> I think, it should work for most of the variants of Northstar family,
> except for those which have a BOOTROM bug.

Which SoC are affected by this BOOTROM bug?

>>> Northstar Plus SoC is based on ARM Cortex-A9
>>> revision r3p0 which requires configuration for ARM
>>> Errata 764369 for SMP. This change adds the needed
>>> configuration option.
>>>
>>> Signed-off-by: Kapil Hali <kapilh@broadcom.com>
>>> ---
>>> arch/arm/mach-bcm/Kconfig | 2 +
>>> arch/arm/mach-bcm/Makefile | 8 +-
>>> arch/arm/mach-bcm/bcm_nsp.h | 19 ++++
>>> arch/arm/mach-bcm/headsmp.S | 37 ++++++++
>>> arch/arm/mach-bcm/{kona_smp.c => platsmp.c} | 142 ++++++++++++++++++++++++++--
>>> 5 files changed, 197 insertions(+), 11 deletions(-)
>>> create mode 100644 arch/arm/mach-bcm/bcm_nsp.h
>>> create mode 100644 arch/arm/mach-bcm/headsmp.S
>>> rename arch/arm/mach-bcm/{kona_smp.c => platsmp.c} (63%)
>>>
>>> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
>>> index 1679fa4..2e9dbb5 100644
>>> --- a/arch/arm/mach-bcm/Kconfig
>>> +++ b/arch/arm/mach-bcm/Kconfig
>>> @@ -40,6 +40,8 @@ config ARCH_BCM_NSP
>>> select ARCH_BCM_IPROC
>>> select ARM_ERRATA_754322
>>> select ARM_ERRATA_775420
>>> + select ARM_ERRATA_764369 if SMP
>>> + select HAVE_SMP
>>> help
>>> Support for Broadcom Northstar Plus SoC.
>>> Broadcom Northstar Plus family of SoCs are used for switching control
>>> diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
>>> index 892261f..36a4ca30 100644
>>> --- a/arch/arm/mach-bcm/Makefile
>>> +++ b/arch/arm/mach-bcm/Makefile
>>> @@ -14,7 +14,11 @@
>>> obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o
>>>
>>> # Northstar Plus
>>> -obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o
>>> +obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o
>>> +
>>> +ifeq ($(CONFIG_ARCH_BCM_NSP),y)
>>> +obj-$(CONFIG_SMP) += headsmp.o platsmp.o
>>> +endif
>>>
>>> # BCM281XX
>>> obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
>>> @@ -23,7 +27,7 @@ obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
>>> obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o
>>>
>>> # BCM281XX and BCM21664 SMP support
>>> -obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += kona_smp.o
>>> +obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += platsmp.o
>>>
>>> # BCM281XX and BCM21664 L2 cache control
>>> obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
>>> diff --git a/arch/arm/mach-bcm/bcm_nsp.h b/arch/arm/mach-bcm/bcm_nsp.h
>>> new file mode 100644
>>> index 0000000..58e1e80
>>> --- /dev/null
>>> +++ b/arch/arm/mach-bcm/bcm_nsp.h
>>> @@ -0,0 +1,19 @@
>>> +/*
>>> + * Copyright (C) 2015 Broadcom Corporation
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation version 2.
>>> + *
>>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>>> + * kind, whether express or implied; without even the implied warranty
>>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + */
>>> +
>>> +#ifndef __BCM_NSP_H
>>> +#define __BCM_NSP_H
>>> +
>>> +extern void nsp_secondary_startup(void);
>>> +
>>> +#endif /* __BCM_NSP_H */
>>> diff --git a/arch/arm/mach-bcm/headsmp.S b/arch/arm/mach-bcm/headsmp.S
>>> new file mode 100644
>>> index 0000000..0da13b2
>>> --- /dev/null
>>> +++ b/arch/arm/mach-bcm/headsmp.S
>>> @@ -0,0 +1,37 @@
>>> +/*
>>> + * Copyright (C) 2015 Broadcom Corporation
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation version 2.
>>> + *
>>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>>> + * kind, whether express or implied; without even the implied warranty
>>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + */
>>> +
>>> +#include <linux/linkage.h>
>>> +
>>> +/*
>>> + * iProc specific entry point for secondary CPUs. This provides
>>> + * a "holding pen" into which all secondary cores are held until
>>> + * we are ready for them to initialise.
>>> + */
>>> +ENTRY(nsp_secondary_startup)
>>> + mrc p15, 0, r0, c0, c0, 5
>>> + and r0, r0, #15
>>> + adr r4, 1f
>>> + ldmia r4, {r5, r6}
>>> + sub r4, r4, r5
>>> + add r6, r6, r4
>>> +pen: ldr r7, [r6]
>>> + cmp r7, r0
>>> + bne pen
>>> +
>>> + b secondary_startup
>>> +
>>> +1: .long .
>>> + .long pen_release
>>> +
>>> +ENDPROC(nsp_secondary_startup)
>>> diff --git a/arch/arm/mach-bcm/kona_smp.c b/arch/arm/mach-bcm/platsmp.c
>>> similarity index 63%
>>> rename from arch/arm/mach-bcm/kona_smp.c
>>> rename to arch/arm/mach-bcm/platsmp.c
>>> index 66a0465..619030e 100644
>>> --- a/arch/arm/mach-bcm/kona_smp.c
>>> +++ b/arch/arm/mach-bcm/platsmp.c
>>> @@ -1,5 +1,5 @@
>>> /*
>>> - * Copyright (C) 2014 Broadcom Corporation
>>> + * Copyright (C) 2014-2015 Broadcom Corporation
>>> * Copyright 2014 Linaro Limited
>>> *
>>> * This program is free software; you can redistribute it and/or
>>> @@ -12,16 +12,23 @@
>>> * GNU General Public License for more details.
>>> */
>>>
>>> -#include <linux/init.h>
>>> +#include <linux/cpumask.h>
>>> +#include <linux/delay.h>
>>> #include <linux/errno.h>
>>> +#include <linux/init.h>
>>> #include <linux/io.h>
>>> +#include <linux/jiffies.h>
>>> #include <linux/of.h>
>>> #include <linux/sched.h>
>>> +#include <linux/smp.h>
>>>
>>> +#include <asm/cacheflush.h>
>>> #include <asm/smp.h>
>>> #include <asm/smp_plat.h>
>>> #include <asm/smp_scu.h>
>>>
>>> +#include "bcm_nsp.h"
>>> +
>>> /* Size of mapped Cortex A9 SCU address space */
>>> #define CORTEX_A9_SCU_SIZE 0x58
>>>
>>> @@ -34,6 +41,24 @@
>>> /* I/O address of register used to coordinate secondary core startup */
>>> static u32 secondary_boot;
>>>
>>> +static DEFINE_SPINLOCK(boot_lock);
>>> +
>>> +/*
>>> + * Write pen_release in a way that is guaranteed to be visible to all
>>> + * observers, irrespective of whether they're taking part in coherency
>>> + * or not. This is necessary for the hotplug code to work reliably.
>>> + */
>>> +static void write_pen_release(int val)
>>> +{
>>> + pen_release = val;
>>> + /*
>>> + * Ensure write to pen_release is visible to the other cores,
>>> + * here - primary core
>>> + */
>>> + smp_wmb();
>>> + sync_cache_w(&pen_release);
>>> +}
>>> +
>>> /*
>>> * Enable the Cortex A9 Snoop Control Unit
>>> *
>>> @@ -75,6 +100,51 @@ static int __init scu_a9_enable(void)
>>> return 0;
>>> }
>>>
>>> +static int nsp_write_lut(void (*secondary_startup) (void))
>>> +{
>>> + void __iomem *sku_rom_lut;
>>> + phys_addr_t secondary_startup_phy;
>>> +
>>> + if (!secondary_boot) {
>>> + pr_warn("required secondary boot register not specified\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot,
>>> + sizeof(secondary_boot));
>>> + if (!sku_rom_lut) {
>>> + pr_warn("unable to ioremap SKU-ROM LUT register\n");
>>> + return -ENOMEM;
>>> + }
>>> +
>>> + secondary_startup_phy = virt_to_phys(secondary_startup);
>>> + BUG_ON(secondary_startup_phy > (phys_addr_t)U32_MAX);
>>> +
>>> + writel_relaxed(secondary_startup_phy, sku_rom_lut);
>>> + /*
>>> + * Ensure the write is visible to the secondary core.
>>> + */
>>> + smp_wmb();
>>> +
>>> + iounmap(sku_rom_lut);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static void nsp_secondary_init(unsigned int cpu)
>>> +{
>>> + /*
>>> + * Let the primary cpu know we are out of holding pen.
>>> + */
>>> + write_pen_release(-1);
>>> +
>>> + /*
>>> + * Synchronise with the boot thread.
>>> + */
>>> + spin_lock(&boot_lock);
>>> + spin_unlock(&boot_lock);
>>> +}
>>> +
>>> static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
>>> {
>>> static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
>>> @@ -95,11 +165,11 @@ static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
>>> /*
>>> * Our secondary enable method requires a "secondary-boot-reg"
>>> * property to specify a register address used to request the
>>> - * ROM code boot a secondary code. If we have any trouble
>>> + * ROM code boot a secondary core. If we have any trouble
>>> * getting this we fall back to uniprocessor mode.
>>> */
>>> if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) {
>>> - pr_err("%s: missing/invalid " OF_SECONDARY_BOOT " property\n",
>>> + pr_warn("%s: missing/invalid " OF_SECONDARY_BOOT " property\n",
>>> node->name);
>>> ret = -ENOENT; /* Arrange to disable SMP */
>>> goto out;
>>> @@ -115,7 +185,6 @@ out:
>>> of_node_put(node);
>>> if (ret) {
>>> /* Update the CPU present map to reflect uniprocessor mode */
>>> - BUG_ON(ret != -ENOENT);
>>> pr_warn("disabling SMP\n");
>>> init_cpu_present(&only_cpu_0);
>>> }
>>> @@ -139,7 +208,7 @@ out:
>>> * - Wait for the secondary boot register to be re-written, which
>>> * indicates the secondary core has started.
>>> */
>>> -static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
>>> +static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
>>> {
>>> void __iomem *boot_reg;
>>> phys_addr_t boot_func;
>>> @@ -162,7 +231,7 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
>>> boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32));
>>> if (!boot_reg) {
>>> pr_err("unable to map boot register for cpu %u\n", cpu_id);
>>> - return -ENOSYS;
>>> + return -ENOMEM;
>>> }
>>>
>>> /*
>>> @@ -191,12 +260,67 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
>>>
>>> pr_err("timeout waiting for cpu %u to start\n", cpu_id);
>>>
>>> - return -ENOSYS;
>>> + return -ENXIO;
>>> +}
>>> +
>>> +static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
>>> +{
>>> + unsigned long timeout;
>>> + int ret;
>>> +
>>> + /*
>>> + * After wake up, secondary core branches to the startup
>>> + * address programmed at SKU ROM LUT location.
>>> + */
>>> + ret = nsp_write_lut(nsp_secondary_startup);
>>> + if (ret) {
>>> + pr_err("unable to write startup addr to SKU ROM LUT\n");
>>> + goto out;
>>> + }
>>> +
>>> + /*
>>> + * The secondary processor is waiting to be released from
>>> + * the holding pen - release it, then wait for it to flag
>>> + * that it has been released by resetting pen_release.
>>> + */
>>> + spin_lock(&boot_lock);
>>> +
>>> + write_pen_release(cpu_logical_map(cpu));
>>> + /*
>>> + * Send an Event to wake up the secondary core which is in
>>> + * WFE state. Updated pen_release should also be visible to
>>> + * the secondary core.
>>> + */
>>> + dsb_sev();
>>> +
>>> + timeout = jiffies + (1 * HZ);
>>> + while (time_before(jiffies, timeout)) {
>>> + /* Make sure loads on other CPU is visible */
>>> + smp_rmb();
>>> + if (pen_release == -1)
>>> + break;
>>> +
>>> + udelay(10);
>>> + }
>>> +
>>> + spin_unlock(&boot_lock);
>>
>> Why is this boot_lock needed? As far as I understand it asserts that
>> both CPUs leave nsp_boot_secondary() and nsp_secondary_init() at the
>> same time.
>>
> It makes sure secondary cpu doesn't run away before primary cpu
> recognizes the presence of secondary cpu, it is a way of
> synchronization between primary and secondary cpu. This is the
> method used across many SoCs.
>>> +
>>> + ret = pen_release != -1 ? -ENXIO : 0;
>>> +
>>> +out:
>>> + return ret;
>>> }
>>>
>>> static struct smp_operations bcm_smp_ops __initdata = {
>>> .smp_prepare_cpus = bcm_smp_prepare_cpus,
>>> - .smp_boot_secondary = bcm_boot_secondary,
>>> + .smp_boot_secondary = kona_boot_secondary,
>>> };
>>> CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
>>> &bcm_smp_ops);
>>> +
>>> +struct smp_operations nsp_smp_ops __initdata = {
>>> + .smp_prepare_cpus = bcm_smp_prepare_cpus,
>>> + .smp_secondary_init = nsp_secondary_init,
>>> + .smp_boot_secondary = nsp_boot_secondary,
>>> +};
>>> +CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);
>>>
>>
> Thanks,
> Kapil
>



\
 
 \ /
  Last update: 2015-10-15 23:41    [W:2.107 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site