lkml.org 
[lkml]   [2015]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 04/10] clk: nsp: add clock support for Broadcom Northstar Plus SoC
On Thu, Oct 15, 2015 at 01:41:57PM -0700, Scott Branden wrote:
> Jon,
>
> Review below.
>
> On 15-10-15 12:48 PM, Jon Mason wrote:
> >The Broadcom Northstar Plus SoC is architected under the iProc
>
> Based on changes in Makefile below - should this be for Northstar
> and Northstar Plus?

Yes, that would be more accurate (or the 5301x/4708 verbage we are
using now in Linux for that SoC family). If there is the need for
another version of this patch, I'll fix it up.

Thanks,
Jon

>
> >architecture. It has the following PLLs: ARMPLL, GENPLL, LCPLL0, all
> >derived from an onboard crystal.
> >
> >Signed-off-by: Jon Mason <jonmason@broadcom.com>
> >---
> > drivers/clk/bcm/Makefile | 2 +
> > drivers/clk/bcm/clk-nsp.c | 135 ++++++++++++++++++++++++++++++++++++
> > include/dt-bindings/clock/bcm-nsp.h | 51 ++++++++++++++
> > 3 files changed, 188 insertions(+)
> > create mode 100644 drivers/clk/bcm/clk-nsp.c
> > create mode 100644 include/dt-bindings/clock/bcm-nsp.h
> >
> >diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
> >index 8a7a477..e258b28 100644
> >--- a/drivers/clk/bcm/Makefile
> >+++ b/drivers/clk/bcm/Makefile
> >@@ -4,3 +4,5 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
> > obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
> > obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
> > obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o
> >+obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o
> >+obj-$(CONFIG_ARCH_BCM_5301X) += clk-nsp.o
>


\
 
 \ /
  Last update: 2015-10-15 23:21    [W:0.139 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site