lkml.org 
[lkml]   [2015]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2 6/6] gicv2m: acpi: Introducing GICv2m ACPI support
From
Date
Hi Suravee,

On 15.10.2015 01:25, Suravee Suthikulpanit wrote:
> This patch introduces gicv2m_acpi_init(), which uses information
> in MADT GIC MSI frames structure to initialize GICv2m driver.
>
> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> ---
> drivers/irqchip/irq-gic-v2m.c | 94 +++++++++++++++++++++++++++++++++++++++++
> drivers/irqchip/irq-gic.c | 3 ++
> include/linux/irqchip/arm-gic.h | 6 +++
> 3 files changed, 103 insertions(+)
>
> diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c
> index 7e60f7e..290f5b3 100644
> --- a/drivers/irqchip/irq-gic-v2m.c
> +++ b/drivers/irqchip/irq-gic-v2m.c
> @@ -15,9 +15,11 @@
>
> #define pr_fmt(fmt) "GICv2m: " fmt
>
> +#include <linux/acpi.h>
> #include <linux/irq.h>
> #include <linux/irqdomain.h>
> #include <linux/kernel.h>
> +#include <linux/msi.h>
> #include <linux/of_address.h>
> #include <linux/of_pci.h>
> #include <linux/slab.h>
> @@ -138,6 +140,11 @@ static int gicv2m_irq_gic_domain_alloc(struct irq_domain *domain,
> fwspec.param[0] = 0;
> fwspec.param[1] = hwirq - 32;
> fwspec.param[2] = IRQ_TYPE_EDGE_RISING;
> + } else if (is_fwnode_irqchip(domain->parent->fwnode)) {
> + fwspec.fwnode = domain->parent->fwnode;
> + fwspec.param_count = 2;
> + fwspec.param[0] = hwirq;
> + fwspec.param[1] = IRQ_TYPE_EDGE_RISING & IRQ_TYPE_SENSE_MASK;
How about just:
fwspec.param[1] = IRQ_TYPE_EDGE_RISING;

> } else {
> return -EINVAL;
> }
> @@ -255,6 +262,8 @@ static void gicv2m_teardown(void)
> kfree(v2m->bm);
> iounmap(v2m->base);
> of_node_put(to_of_node(v2m->fwnode));
> + if (is_fwnode_irqchip(v2m->fwnode))
> + irq_domain_free_fwnode(v2m->fwnode);
> kfree(v2m);
> }
> }
> @@ -359,6 +368,8 @@ static int __init gicv2m_init_one(struct fwnode_handle *fwnode,
>
> if (to_of_node(fwnode))
> name = to_of_node(fwnode)->name;
> + else
> + name = irq_domain_get_irqchip_fwnode_name(fwnode);
>
> pr_info("Frame %s: range[%#lx:%#lx], SPI[%d:%d]\n", name,
> (unsigned long)res->start, (unsigned long)res->end,
> @@ -415,3 +426,86 @@ int __init gicv2m_of_init(struct device_node *node, struct irq_domain *parent)
> gicv2m_teardown();
> return ret;
> }
> +
> +#ifdef CONFIG_ACPI
> +static int acpi_num_msi;
> +
> +static struct fwnode_handle *gicv2m_get_fwnode(struct device *dev)
> +{
> + struct v2m_data *data;
> +
> + if (WARN_ON(acpi_num_msi <= 0))
> + return NULL;
> +
> + /* We only return the fwnode of the first MSI frame. */
> + data = list_first_entry_or_null(&v2m_nodes,
> + struct v2m_data, entry);
This can be one line and still fits within 80 characters.
> + if (!data)
> + return NULL;
> +
> + return data->fwnode;
> +}
> +
> +static int __init
> +acpi_parse_madt_msi(struct acpi_subtable_header *header,
> + const unsigned long end)
> +{
> + int ret;
> + struct resource res;
> + u32 spi_start = 0, nr_spis = 0;
> + struct acpi_madt_generic_msi_frame *m;
> + struct fwnode_handle *fwnode = NULL;
> +
> + m = (struct acpi_madt_generic_msi_frame *)header;
> + if (BAD_MADT_ENTRY(m, end))
> + return -EINVAL;
> +
> + res.start = m->base_address;
> + res.end = m->base_address + 0x1000;
> +
> + if (m->flags & ACPI_MADT_OVERRIDE_SPI_VALUES) {
> + spi_start = m->spi_base;
> + nr_spis = m->spi_count;
> +
> + pr_info("ACPI overriding V2M MSI_TYPER (base:%u, num:%u)\n",
> + spi_start, nr_spis);
> + }
> +
> + fwnode = irq_domain_alloc_fwnode((void *)m->base_address);
> + if (!fwnode) {
> + pr_err("Unable to allocate GICv2m domain token\n");
> + return -EINVAL;
> + }
> +
> + ret = gicv2m_init_one(fwnode, spi_start, nr_spis, &res);
I case of error, we should call here:
irq_domain_free_fwnode(fwnode);

> +
> + return ret;
> +}
> +
> +int __init gicv2m_acpi_init(struct irq_domain *parent)
> +{
> + int ret;
> +
> + if (acpi_num_msi > 0)
> + return 0;
> +
> + acpi_num_msi = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_MSI_FRAME,
> + acpi_parse_madt_msi, 0);
> +
> + if (acpi_num_msi <= 0)
> + goto err_out;
If acpi_table_parse_madt return 0, then we don't need to call
gicv2m_teardown(). Instead we can simply return, optionally add some
pr_info. Well, gicv2m_teardown would do nothing, so this is just
cosmetic and up to you.

> +
> + ret = gicv2m_allocate_domains(parent);
> + if (ret)
> + goto err_out;
> +
> + pci_msi_register_fwnode_provider(&gicv2m_get_fwnode);
> +
> + return 0;
> +
> +err_out:
> + gicv2m_teardown();
> + return -EINVAL;
> +}
> +
> +#endif /* CONFIG_ACPI */
> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
> index 6685b33..bb3e1f2 100644
> --- a/drivers/irqchip/irq-gic.c
> +++ b/drivers/irqchip/irq-gic.c
> @@ -1329,6 +1329,9 @@ gic_v2_acpi_init(struct acpi_table_header *table)
>
> __gic_init_bases(0, -1, dist_base, cpu_base, 0, domain_handle);
>
> + if (IS_ENABLED(CONFIG_ARM_GIC_V2M))
> + gicv2m_acpi_init(gic_data[0].domain);
> +
> acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle);
> return 0;
> }
> diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
> index bae69e5..7398538 100644
> --- a/include/linux/irqchip/arm-gic.h
> +++ b/include/linux/irqchip/arm-gic.h
> @@ -108,6 +108,12 @@ void gic_init(unsigned int nr, int start,
>
> int gicv2m_of_init(struct device_node *node, struct irq_domain *parent);
>
> +#ifdef CONFIG_ACPI
> +#include <linux/acpi.h>
I think, we don't need this include here. You already added it to itq-gic.c

Moreover, seems we need to add irq_domain_free_fwnode to gicv2m_teardown():
static void gicv2m_teardown(void)
{
struct v2m_data *v2m, *tmp;

list_for_each_entry_safe(v2m, tmp, &v2m_nodes, entry) {
+ struct fwnode_handle *handle = v2m->fwnode;
+
list_del(&v2m->entry);
kfree(v2m->bm);
iounmap(v2m->base);
- of_node_put(to_of_node(v2m->fwnode));
+ if (is_of_node(handle))
+ of_node_put(to_of_node(handle));
+ else if (is_irqchip_node(handle))
+ irq_domain_free_fwnode(handle);
kfree(v2m);
}
}

Thanks,
Tomasz


\
 
 \ /
  Last update: 2015-10-15 08:41    [W:1.429 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site