lkml.org 
[lkml]   [2015]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] cpufreq, intel_pstate, Fix intel_pstate powersave min_perf_pct value
On Wed, 14 Oct 2015 07:41:59 -0400
Prarit Bhargava <prarit@redhat.com> wrote:

> On systems that initialize the intel_pstate driver with the performance
> governor, and then switch to the powersave governor will not transition to
> lower cpu frequencies until /sys/devices/system/cpu/intel_pstate/min_perf_pct
> is set to a low value.
>
> The behavior of governor switching changed after commit a04759924e25
> ("[cpufreq] intel_pstate: honor user space min_perf_pct override on
> resume"). The commit introduced tracking of performance percentage
> changes via sysfs in order to restore userspace changes during
> suspend/resume. The problem occurs because the global values of the newly
> introduced max_sysfs_pct and min_sysfs_pct are not lowered on the governor
> change and this causes the powersave governor to inherit the performance
> governor's settings.
>
> A simple change would have been to reset max_sysfs_pct to 100 and
> min_sysfs_pct to 0 on a governor change, which fixes the problem with
> governor switching. However, since we cannot break userspace[1] the fix
> is now to give each governor its own limits storage area so that governor
> specific changes are tracked.
>
> I successfully tested this by booting with both the performance governor
> and the powersave governor by default, and switching between the two
> governors (while monitoring /sys/devices/system/cpu/intel_pstate/ values,
> and looking at the output of cpupower frequency-info). Suspend/Resume
> testing was performed by Doug Smythies.
>
> [1] Systems which suspend/resume using the unmaintained pm-utils package
> will always transition to the performance governor before the suspend and
> after the resume. This means a system using the powersave governor will
> go from powersave to performance, then suspend/resume, performance to
> powersave. The simple change during governor changes would have been
> overwritten when the governor changed before and after the suspend/resume.
> I have submitted https://bugzilla.redhat.com/show_bug.cgi?id=1271225
> against Fedora to remove the 94cpufreq file that causes the problem. It
> should be noted that pm-utils is obsoleted with newer versions of systemd.
>
> Cc: Kristen Carlson Accardi <kristen@linux.intel.com>
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: linux-pm@vger.kernel.org
> Cc: Doug Smythies <dsmythies@telus.net>
> Signed-off-by: Prarit Bhargava <prarit@redhat.com>

Acked-by: Kristen Carlson Accardi <kristen@linux.intel.com>

BTW - I think I can see an issue here with HWP enabled systems. It
looks to me like the hwp settings will not be programmed correctly
during a governor switch. This probably needs to be addressed in a
separate patch.

> ---
> drivers/cpufreq/intel_pstate.c | 120 +++++++++++++++++++++++++---------------
> 1 file changed, 75 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
> index 3af9dd7..78b4be5 100644
> --- a/drivers/cpufreq/intel_pstate.c
> +++ b/drivers/cpufreq/intel_pstate.c
> @@ -156,7 +156,20 @@ struct perf_limits {
> int min_sysfs_pct;
> };
>
> -static struct perf_limits limits = {
> +static struct perf_limits performance_limits = {
> + .no_turbo = 0,
> + .turbo_disabled = 0,
> + .max_perf_pct = 100,
> + .max_perf = int_tofp(1),
> + .min_perf_pct = 100,
> + .min_perf = int_tofp(1),
> + .max_policy_pct = 100,
> + .max_sysfs_pct = 100,
> + .min_policy_pct = 0,
> + .min_sysfs_pct = 0,
> +};
> +
> +static struct perf_limits powersave_limits = {
> .no_turbo = 0,
> .turbo_disabled = 0,
> .max_perf_pct = 100,
> @@ -169,6 +182,12 @@ static struct perf_limits limits = {
> .min_sysfs_pct = 0,
> };
>
> +#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
> +static struct perf_limits *limits = &performance_limits;
> +#else
> +static struct perf_limits *limits = &powersave_limits;
> +#endif
> +
> static inline void pid_reset(struct _pid *pid, int setpoint, int busy,
> int deadband, int integral) {
> pid->setpoint = setpoint;
> @@ -255,7 +274,7 @@ static inline void update_turbo_state(void)
>
> cpu = all_cpu_data[0];
> rdmsrl(MSR_IA32_MISC_ENABLE, misc_en);
> - limits.turbo_disabled =
> + limits->turbo_disabled =
> (misc_en & MSR_IA32_MISC_ENABLE_TURBO_DISABLE ||
> cpu->pstate.max_pstate == cpu->pstate.turbo_pstate);
> }
> @@ -274,14 +293,14 @@ static void intel_pstate_hwp_set(void)
>
> for_each_online_cpu(cpu) {
> rdmsrl_on_cpu(cpu, MSR_HWP_REQUEST, &value);
> - adj_range = limits.min_perf_pct * range / 100;
> + adj_range = limits->min_perf_pct * range / 100;
> min = hw_min + adj_range;
> value &= ~HWP_MIN_PERF(~0L);
> value |= HWP_MIN_PERF(min);
>
> - adj_range = limits.max_perf_pct * range / 100;
> + adj_range = limits->max_perf_pct * range / 100;
> max = hw_min + adj_range;
> - if (limits.no_turbo) {
> + if (limits->no_turbo) {
> hw_max = HWP_GUARANTEED_PERF(cap);
> if (hw_max < max)
> max = hw_max;
> @@ -350,7 +369,7 @@ static void __init intel_pstate_debug_expose_params(void)
> static ssize_t show_##file_name \
> (struct kobject *kobj, struct attribute *attr, char *buf) \
> { \
> - return sprintf(buf, "%u\n", limits.object); \
> + return sprintf(buf, "%u\n", limits->object); \
> }
>
> static ssize_t show_turbo_pct(struct kobject *kobj,
> @@ -386,10 +405,10 @@ static ssize_t show_no_turbo(struct kobject *kobj,
> ssize_t ret;
>
> update_turbo_state();
> - if (limits.turbo_disabled)
> - ret = sprintf(buf, "%u\n", limits.turbo_disabled);
> + if (limits->turbo_disabled)
> + ret = sprintf(buf, "%u\n", limits->turbo_disabled);
> else
> - ret = sprintf(buf, "%u\n", limits.no_turbo);
> + ret = sprintf(buf, "%u\n", limits->no_turbo);
>
> return ret;
> }
> @@ -405,12 +424,12 @@ static ssize_t store_no_turbo(struct kobject *a, struct attribute *b,
> return -EINVAL;
>
> update_turbo_state();
> - if (limits.turbo_disabled) {
> + if (limits->turbo_disabled) {
> pr_warn("intel_pstate: Turbo disabled by BIOS or unavailable on processor\n");
> return -EPERM;
> }
>
> - limits.no_turbo = clamp_t(int, input, 0, 1);
> + limits->no_turbo = clamp_t(int, input, 0, 1);
>
> if (hwp_active)
> intel_pstate_hwp_set();
> @@ -428,11 +447,15 @@ static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b,
> if (ret != 1)
> return -EINVAL;
>
> - limits.max_sysfs_pct = clamp_t(int, input, 0 , 100);
> - limits.max_perf_pct = min(limits.max_policy_pct, limits.max_sysfs_pct);
> - limits.max_perf_pct = max(limits.min_policy_pct, limits.max_perf_pct);
> - limits.max_perf_pct = max(limits.min_perf_pct, limits.max_perf_pct);
> - limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100));
> + limits->max_sysfs_pct = clamp_t(int, input, 0 , 100);
> + limits->max_perf_pct = min(limits->max_policy_pct,
> + limits->max_sysfs_pct);
> + limits->max_perf_pct = max(limits->min_policy_pct,
> + limits->max_perf_pct);
> + limits->max_perf_pct = max(limits->min_perf_pct,
> + limits->max_perf_pct);
> + limits->max_perf = div_fp(int_tofp(limits->max_perf_pct),
> + int_tofp(100));
>
> if (hwp_active)
> intel_pstate_hwp_set();
> @@ -449,11 +472,15 @@ static ssize_t store_min_perf_pct(struct kobject *a, struct attribute *b,
> if (ret != 1)
> return -EINVAL;
>
> - limits.min_sysfs_pct = clamp_t(int, input, 0 , 100);
> - limits.min_perf_pct = max(limits.min_policy_pct, limits.min_sysfs_pct);
> - limits.min_perf_pct = min(limits.max_policy_pct, limits.min_perf_pct);
> - limits.min_perf_pct = min(limits.max_perf_pct, limits.min_perf_pct);
> - limits.min_perf = div_fp(int_tofp(limits.min_perf_pct), int_tofp(100));
> + limits->min_sysfs_pct = clamp_t(int, input, 0 , 100);
> + limits->min_perf_pct = max(limits->min_policy_pct,
> + limits->min_sysfs_pct);
> + limits->min_perf_pct = min(limits->max_policy_pct,
> + limits->min_perf_pct);
> + limits->min_perf_pct = min(limits->max_perf_pct,
> + limits->min_perf_pct);
> + limits->min_perf = div_fp(int_tofp(limits->min_perf_pct),
> + int_tofp(100));
>
> if (hwp_active)
> intel_pstate_hwp_set();
> @@ -533,7 +560,7 @@ static void byt_set_pstate(struct cpudata *cpudata, int pstate)
> u32 vid;
>
> val = (u64)pstate << 8;
> - if (limits.no_turbo && !limits.turbo_disabled)
> + if (limits->no_turbo && !limits->turbo_disabled)
> val |= (u64)1 << 32;
>
> vid_fp = cpudata->vid.min + mul_fp(
> @@ -622,7 +649,7 @@ static void core_set_pstate(struct cpudata *cpudata, int pstate)
> u64 val;
>
> val = (u64)pstate << 8;
> - if (limits.no_turbo && !limits.turbo_disabled)
> + if (limits->no_turbo && !limits->turbo_disabled)
> val |= (u64)1 << 32;
>
> wrmsrl_on_cpu(cpudata->cpu, MSR_IA32_PERF_CTL, val);
> @@ -702,7 +729,7 @@ static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max)
> int max_perf_adj;
> int min_perf;
>
> - if (limits.no_turbo || limits.turbo_disabled)
> + if (limits->no_turbo || limits->turbo_disabled)
> max_perf = cpu->pstate.max_pstate;
>
> /*
> @@ -710,11 +737,11 @@ static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max)
> * policy, or by cpu specific default values determined through
> * experimentation.
> */
> - max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf), limits.max_perf));
> + max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf), limits->max_perf));
> *max = clamp_t(int, max_perf_adj,
> cpu->pstate.min_pstate, cpu->pstate.turbo_pstate);
>
> - min_perf = fp_toint(mul_fp(int_tofp(max_perf), limits.min_perf));
> + min_perf = fp_toint(mul_fp(int_tofp(max_perf), limits->min_perf));
> *min = clamp_t(int, min_perf, cpu->pstate.min_pstate, max_perf);
> }
>
> @@ -988,32 +1015,35 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
>
> if (policy->policy == CPUFREQ_POLICY_PERFORMANCE &&
> policy->max >= policy->cpuinfo.max_freq) {
> - limits.min_policy_pct = 100;
> - limits.min_perf_pct = 100;
> - limits.min_perf = int_tofp(1);
> - limits.max_policy_pct = 100;
> - limits.max_perf_pct = 100;
> - limits.max_perf = int_tofp(1);
> - limits.no_turbo = 0;
> + pr_debug("intel_pstate: set performance\n");
> + limits = &performance_limits;
> return 0;
> }
>
> - limits.min_policy_pct = (policy->min * 100) / policy->cpuinfo.max_freq;
> - limits.min_policy_pct = clamp_t(int, limits.min_policy_pct, 0 , 100);
> - limits.max_policy_pct = (policy->max * 100) / policy->cpuinfo.max_freq;
> - limits.max_policy_pct = clamp_t(int, limits.max_policy_pct, 0 , 100);
> + pr_debug("intel_pstate: set powersave\n");
> + limits = &powersave_limits;
> + limits->min_policy_pct = (policy->min * 100) / policy->cpuinfo.max_freq;
> + limits->min_policy_pct = clamp_t(int, limits->min_policy_pct, 0 , 100);
> + limits->max_policy_pct = (policy->max * 100) / policy->cpuinfo.max_freq;
> + limits->max_policy_pct = clamp_t(int, limits->max_policy_pct, 0 , 100);
>
> /* Normalize user input to [min_policy_pct, max_policy_pct] */
> - limits.min_perf_pct = max(limits.min_policy_pct, limits.min_sysfs_pct);
> - limits.min_perf_pct = min(limits.max_policy_pct, limits.min_perf_pct);
> - limits.max_perf_pct = min(limits.max_policy_pct, limits.max_sysfs_pct);
> - limits.max_perf_pct = max(limits.min_policy_pct, limits.max_perf_pct);
> + limits->min_perf_pct = max(limits->min_policy_pct,
> + limits->min_sysfs_pct);
> + limits->min_perf_pct = min(limits->max_policy_pct,
> + limits->min_perf_pct);
> + limits->max_perf_pct = min(limits->max_policy_pct,
> + limits->max_sysfs_pct);
> + limits->max_perf_pct = max(limits->min_policy_pct,
> + limits->max_perf_pct);
>
> /* Make sure min_perf_pct <= max_perf_pct */
> - limits.min_perf_pct = min(limits.max_perf_pct, limits.min_perf_pct);
> + limits->min_perf_pct = min(limits->max_perf_pct, limits->min_perf_pct);
>
> - limits.min_perf = div_fp(int_tofp(limits.min_perf_pct), int_tofp(100));
> - limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100));
> + limits->min_perf = div_fp(int_tofp(limits->min_perf_pct),
> + int_tofp(100));
> + limits->max_perf = div_fp(int_tofp(limits->max_perf_pct),
> + int_tofp(100));
>
> if (hwp_active)
> intel_pstate_hwp_set();
> @@ -1057,7 +1087,7 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy)
>
> cpu = all_cpu_data[policy->cpu];
>
> - if (limits.min_perf_pct == 100 && limits.max_perf_pct == 100)
> + if (limits->min_perf_pct == 100 && limits->max_perf_pct == 100)
> policy->policy = CPUFREQ_POLICY_PERFORMANCE;
> else
> policy->policy = CPUFREQ_POLICY_POWERSAVE;



\
 
 \ /
  Last update: 2015-10-14 23:21    [W:0.543 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site