lkml.org 
[lkml]   [2015]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] ARM: at91/dt: sama5d2: add missing devices
Date
Big update of the sama5d2.dtsi file since many patches have reached te
mainline:
- add generated clocks
- enable crypto devices
- add flexcom devices
- add tdes device
- add sdmmc devices

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
---
arch/arm/boot/dts/sama5d2.dtsi | 152 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 150 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index cc05cde..5afccbc 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -263,6 +263,24 @@
cache-level = <2>;
};

+ sdmmc0: sdio-host@a0000000 {
+ compatible = "atmel,sama5d2-sdhci";
+ reg = <0xa0000000 0x300>;
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
+ clock-names = "hclock", "multclk", "baseclk";
+ status = "disabled";
+ };
+
+ sdmmc1: sdio-host@b0000000 {
+ compatible = "atmel,sama5d2-sdhci";
+ reg = <0xb0000000 0x300>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>;
+ clock-names = "hclock", "multclk", "baseclk";
+ status = "disabled";
+ };
+
apb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -619,6 +637,18 @@
atmel,clk-output-range = <0 83000000>;
};

+ i2s0_clk: i2s0_clk {
+ #clock-cells = <0>;
+ reg = <54>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ i2s1_clk: i2s1_clk {
+ #clock-cells = <0>;
+ reg = <55>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
classd_clk: classd_clk {
#clock-cells = <0>;
reg = <59>;
@@ -697,6 +727,52 @@
reg = <53>;
};
};
+
+ gck {
+ compatible = "atmel,sama5d2-clk-generated";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+ sdmmc0_gclk: sdmmc0_gclk {
+ #clock-cells = <0>;
+ reg = <31>;
+ };
+
+ sdmmc1_gclk: sdmmc1_gclk {
+ #clock-cells = <0>;
+ reg = <32>;
+ };
+
+ tcb0_gclk: tcb0_gclk {
+ #clock-cells = <0>;
+ reg = <35>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ tcb1_gclk: tcb1_gclk {
+ #clock-cells = <0>;
+ reg = <36>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ pwm_gclk: pwm_gclk {
+ #clock-cells = <0>;
+ reg = <38>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ i2s0_gclk: i2s0_gclk {
+ #clock-cells = <0>;
+ reg = <54>;
+ };
+
+ i2s1_gclk: i2s1_gclk {
+ #clock-cells = <0>;
+ reg = <55>;
+ };
+ };
};

sha@f0028000 {
@@ -709,7 +785,7 @@
dma-names = "tx";
clocks = <&sha_clk>;
clock-names = "sha_clk";
- status = "disabled";
+ status = "okay";
};

aes@f002c000 {
@@ -725,7 +801,7 @@
dma-names = "tx", "rx";
clocks = <&aes_clk>;
clock-names = "aes_clk";
- status = "disabled";
+ status = "okay";
};

spi0: spi@f8000000 {
@@ -820,6 +896,32 @@
status = "disabled";
};

+ flx0: flexcom@f8034000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8034000 0x200>;
+ clocks = <&flx0_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8034000 0x800>;
+ status = "disabled";
+ };
+
+ flx1: flexcom@f8038000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8038000 0x200>;
+ clocks = <&flx1_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8038000 0x800>;
+ status = "disabled";
+ };
+
+ rstc@f8048000 {
+ compatible = "atmel,sama5d3-rstc";
+ reg = <0xf8048000 0x10>;
+ clocks = <&clk32k>;
+ };
+
pit: timer@f8048030 {
compatible = "atmel,at91sam9260-pit";
reg = <0xf8048030 0x10>;
@@ -897,6 +999,36 @@
status = "disabled";
};

+ flx2: flexcom@fc010000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xfc010000 0x200>;
+ clocks = <&flx2_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xfc010000 0x800>;
+ status = "disabled";
+ };
+
+ flx3: flexcom@fc014000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xfc014000 0x200>;
+ clocks = <&flx3_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xfc014000 0x800>;
+ status = "disabled";
+ };
+
+ flx4: flexcom@fc018000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xfc018000 0x200>;
+ clocks = <&flx4_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xfc018000 0x800>;
+ status = "disabled";
+ };
+
aic: interrupt-controller@fc020000 {
#interrupt-cells = <3>;
compatible = "atmel,sama5d2-aic";
@@ -935,6 +1067,22 @@
#gpio-cells = <2>;
clocks = <&pioA_clk>;
};
+
+ tdes@fc044000 {
+ compatible = "atmel,at91sam9g46-tdes";
+ reg = <0xfc044000 0x100>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(28))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(29))>;
+ dma-names = "tx", "rx";
+ clocks = <&tdes_clk>;
+ clock-names = "tdes_clk";
+ status = "okay";
+ };
};
};
};
--
2.5.0


\
 
 \ /
  Last update: 2015-10-14 14:41    [W:0.106 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site