lkml.org 
[lkml]   [2015]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 22/24] dmaengine: edma: Read channel mapping support only once from HW
Date
Instead of directly reading it from CCCFG register take the information out
once when we set up the configuration from the HW.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
drivers/dma/edma.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index d105d1ae0f13..4b2ccc9de0ad 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -223,6 +223,7 @@ struct edma_cc {
unsigned num_region;
unsigned num_slots;
unsigned num_tc;
+ bool chmap_exist;
enum dma_event_q default_queue;

bool unused_chan_list_done;
@@ -1930,11 +1931,14 @@ static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
value = GET_NUM_EVQUE(cccfg);
ecc->num_tc = value + 1;

+ ecc->chmap_exist = (cccfg & CHMAP_EXIST) ? true : false;
+
dev_dbg(dev, "eDMA3 CC HW configuration (cccfg: 0x%08x):\n", cccfg);
dev_dbg(dev, "num_region: %u\n", ecc->num_region);
dev_dbg(dev, "num_channels: %u\n", ecc->num_channels);
dev_dbg(dev, "num_slots: %u\n", ecc->num_slots);
dev_dbg(dev, "num_tc: %u\n", ecc->num_tc);
+ dev_dbg(dev, "chmap_exist: %s\n", ecc->chmap_exist ? "yes" : "no");

/* Nothing need to be done if queue priority is provided */
if (pdata->queue_priority_mapping)
@@ -2223,7 +2227,7 @@ static int edma_probe(struct platform_device *pdev)
queue_priority_mapping[i][1]);

/* Map the channel to param entry if channel mapping logic exist */
- if (edma_read(ecc, EDMA_CCCFG) & CHMAP_EXIST)
+ if (ecc->chmap_exist)
edma_direct_dmach_to_param_mapping(ecc);

for (i = 0; i < ecc->num_region; i++) {
@@ -2293,7 +2297,7 @@ static int edma_pm_resume(struct device *dev)
queue_priority_mapping[i][1]);

/* Map the channel to param entry if channel mapping logic */
- if (edma_read(ecc, EDMA_CCCFG) & CHMAP_EXIST)
+ if (ecc->chmap_exist)
edma_direct_dmach_to_param_mapping(ecc);

for (i = 0; i < ecc->num_channels; i++) {
--
2.6.1


\
 
 \ /
  Last update: 2015-10-14 14:01    [W:0.104 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site