lkml.org 
[lkml]   [2015]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 3/3] arm64: dts: mt8173: Add nor flash node
Sergei,

On Wed, Oct 14, 2015 at 7:05 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> Hello.
>
> On 10/14/2015 4:07 AM, Daniel Kurtz wrote:
>
>>>> Add Mediatek nor flash node
>>>>
>>>> Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com>
>>>> ---
>>>> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 15 +++++++++++++++
>>>> 1 file changed, 15 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>>>> b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>>>> index d18ee42..385c2e4 100644
>>>> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>>>> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>>>> @@ -365,6 +365,21 @@
>>>> status = "disabled";
>>>> };
>>>>
>>>> + nor_flash: spi@1100d000 {
>>>
>>>
>>> I don't think this is a good label name for a SPI controller.
>>
>>
>> You think "spi" is not a good name for SPI controller?
>> Or you mean the label "nor_flash"?
>
>
> I think I said clearly: "label". :-)
>
>> Would you prefer:
>>
>> spi_nor_flash: spi@1100d000
>
>
> I'd prefer the "_nor_flash" part to be dropped, to be used for the real
> flash device (if needed) which is a sub-node of this node.

The dedicated nor_flash spi bus cannot just be labeled 'spi', as that
would conflict with the general purpose 'spi' bus. Instead, it is
given a unique label that can be used as a phandle elsewhere (e.g., in
a board file, to enable the bus). The name "spi_nor_flash" makes it
clear that this spi bus is only for use for accessing the nor_flash.

Bayi: Actually, this reminds me. I'd prefer if the bus node was
disabled by default, and only enabled by boards as required. So, the
node should include:
status = "disabled";

-Dan


\
 
 \ /
  Last update: 2015-10-14 13:41    [W:0.860 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site