lkml.org 
[lkml]   [2015]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] ARM: dts: bcm5301x: Add BCM SVK DT files
On Sat, Oct 10, 2015 at 04:39:00PM +0200, Hauke Mehrtens wrote:
> On 10/03/2015 12:22 AM, Jon Mason wrote:
> > Add device tree files for Broadcom Northstar based SVKs. Since the
> > bcm5301x.dtsi already exists, all that is necessary is the dts files to
> > enable the UARTs (and specify the RAM size for the 4708/9). With these
> > files, the SVKs are able to boot to shell.
> >
> > Signed-off-by: Jon Mason <jonmason@broadcom.com>
> > ---
> > arch/arm/boot/dts/Makefile | 5 +++-
> > arch/arm/boot/dts/bcm94708.dts | 52 +++++++++++++++++++++++++++++++++++
> > arch/arm/boot/dts/bcm94709.dts | 52 +++++++++++++++++++++++++++++++++++
> > arch/arm/boot/dts/bcm953012k.dts | 59 ++++++++++++++++++++++++++++++++++++++++
> > 4 files changed, 167 insertions(+), 1 deletion(-)
> > create mode 100644 arch/arm/boot/dts/bcm94708.dts
> > create mode 100644 arch/arm/boot/dts/bcm94709.dts
> > create mode 100644 arch/arm/boot/dts/bcm953012k.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 233159d..96a1b58 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -72,7 +72,10 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
> > bcm47081-buffalo-wzr-900dhp.dtb \
> > bcm4709-asus-rt-ac87u.dtb \
> > bcm4709-buffalo-wxr-1900dhp.dtb \
> > - bcm4709-netgear-r8000.dtb
> > + bcm4709-netgear-r8000.dtb \
> > + bcm94708.dtb \
> > + bcm94709.dtb \
> > + bcm953012k.dtb
> > dtb-$(CONFIG_ARCH_BCM_63XX) += \
> > bcm963138dvt.dtb
> > dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
> > diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
> > new file mode 100644
> > index 0000000..57a74c6
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/bcm94708.dts
>
> Currently the files are named beginning with the chip name something
> like this should fit better the other naming schema:
> arch/arm/boot/dts/bcm4708-brcm-bcm94708.dts

Sorry, I was following the namign schema that we've been using on
other Broadcom SVKs in the Linux device tree directory. For example,
arch/arm/boot/dts/bcm911360_entphn.dts
arch/arm/boot/dts/bcm911360k.dts
arch/arm/boot/dts/bcm958300k.dts
arch/arm/boot/dts/bcm958305k.dts
arch/arm/boot/dts/bcm958625k.dts
arch/arm/boot/dts/bcm963138dvt.dts

Also, this is the name we have been using internally. So, it will
making migrating to newer kernels much easier.

>
> > @@ -0,0 +1,52 @@
> > +/*
> > + * BSD LICENSE
> > + *
> > + * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
> > + *
> > + * Redistribution and use in source and binary forms, with or without
> > + * modification, are permitted provided that the following conditions
> > + * are met:
> > + *
> > + * * Redistributions of source code must retain the above copyright
> > + * notice, this list of conditions and the following disclaimer.
> > + * * Redistributions in binary form must reproduce the above copyright
> > + * notice, this list of conditions and the following disclaimer in
> > + * the documentation and/or other materials provided with the
> > + * distribution.
> > + * * Neither the name of Broadcom Corporation nor the names of its
> > + * contributors may be used to endorse or promote products derived
> > + * from this software without specific prior written permission.
> > + *
> > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> > + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> > + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> > + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> > + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> > + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> > + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> > + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> > + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> > + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "bcm5301x.dtsi"
> > +
> > +/ {
> > + model = "NorthStar SVK (BCM94708)";
> > + compatible = "brcm,bcm4708";
>
> The compatible string should also contain this exactly board like this:
> compatible = "brcm,bcm94708", "brcm,bcm4708";

Ok

>
> > +
> > + aliases {
> > + serial0 = &uart0;
> > + };
> > +
> > + chosen {
> > + bootargs = "console=ttyS0,115200 mem=128M";
>
> Instead of using mem=128M you should add an extra node like this:
>
> memory {
> reg = <0x00000000 0x08000000>;
> };
>
> Does this board only has 128M of RAM? currently we restrict all of them
> to that, but I just want to know.

The 4708/9 SVKs have 128M, but the 53012 has 256M.

>
> > + };
> > +};
> > +
> > +&uart0 {
> > + status = "okay";
> > +};
> > diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
> > new file mode 100644
> > index 0000000..bf4b6e1
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/bcm94709.dts
> > @@ -0,0 +1,52 @@
> > +/*
> > + * BSD LICENSE
> > + *
> > + * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
> > + *
> > + * Redistribution and use in source and binary forms, with or without
> > + * modification, are permitted provided that the following conditions
> > + * are met:
> > + *
> > + * * Redistributions of source code must retain the above copyright
> > + * notice, this list of conditions and the following disclaimer.
> > + * * Redistributions in binary form must reproduce the above copyright
> > + * notice, this list of conditions and the following disclaimer in
> > + * the documentation and/or other materials provided with the
> > + * distribution.
> > + * * Neither the name of Broadcom Corporation nor the names of its
> > + * contributors may be used to endorse or promote products derived
> > + * from this software without specific prior written permission.
> > + *
> > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> > + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> > + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> > + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> > + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> > + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> > + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> > + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> > + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> > + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "bcm5301x.dtsi"
> > +
> > +/ {
> > + model = "NorthStar SVK (BCM94709)";
> > + compatible = "brcm,bcm4709", "brcm,bcm4708";
> Better this:
> compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";

It seems to me that this who 4708 base is kind of a misnomer. They
really are "Northstar". Would it not be more accurate to change it to
be
compatible = "brcm,bcm4709", "brcm,ns";
?

>
> > +
> > + aliases {
> > + serial0 = &uart0;
> > + };
> > +
> > + chosen {
> > + bootargs = "console=ttyS0,115200 mem=128M";
> same as above.

Ok

> > + };
> > +};
> > +
> > +&uart0 {
> > + status = "okay";
> > +};
> > diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
> > new file mode 100644
> > index 0000000..1726ba0
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/bcm953012k.dts
> > @@ -0,0 +1,59 @@
> > +/*
> > + * BSD LICENSE
> > + *
> > + * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
> > + *
> > + * Redistribution and use in source and binary forms, with or without
> > + * modification, are permitted provided that the following conditions
> > + * are met:
> > + *
> > + * * Redistributions of source code must retain the above copyright
> > + * notice, this list of conditions and the following disclaimer.
> > + * * Redistributions in binary form must reproduce the above copyright
> > + * notice, this list of conditions and the following disclaimer in
> > + * the documentation and/or other materials provided with the
> > + * distribution.
> > + * * Neither the name of Broadcom Corporation nor the names of its
> > + * contributors may be used to endorse or promote products derived
> > + * from this software without specific prior written permission.
> > + *
> > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> > + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> > + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> > + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> > + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> > + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> > + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> > + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> > + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> > + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "bcm5301x.dtsi"
> > +
> > +/ {
> > + model = "NorthStar SVK (BCM953012K)";
> > + compatible = "brcm,bcm5301k", "brcm,bcm4708";
>
> same as other file.
>
> > +
> > + aliases {
> > + serial0 = &uart0;
> > + serial1 = &uart1;
> > + };
> > +
> > + chosen {
> > + bootargs = "console=ttyS0,115200";
>
> Why is no memory size given here at all?

I'll add the 256M.

>
> > + };
> > +};
> > +
> > +&uart0 {
> > + clock-frequency = <62499840>;
>
> Just out of curiosity on what does this clock frequency depend? I saw
> your patch adding a real clock driver which should make this obsolete.

Better to add this now, as the device tree part might be out of sync
for a time. Also, is it not better to make the UARTs a static clock
and not dependent on the clk driver?

Thanks,
Jon

> > + status = "okay";
> > +};
> > +
> > +&uart1 {
> > + clock-frequency = <62499840>;
> > + status = "okay";
> > +};
> >
>


\
 
 \ /
  Last update: 2015-10-14 00:01    [W:0.082 / U:1.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site