lkml.org 
[lkml]   [2015]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 12/13] scsi: ufs-exynos: add UFS host support for Exynos SoCs
Hi Arnd,

On 10/01/2015 05:42 PM, Arnd Bergmann wrote:
> On Thursday 01 October 2015 13:39:29 Alim Akhtar wrote:
>
>> +static int exynos7_ufs_drv_init(struct device *dev, struct exynos_ufs *ufs)
>> +{
>> + int ret;
>> + const char *const clks[] = {
>> + "mout_sclk_combo_phy_embedded",
>> + "top_sclk_phy_fsys1_26m",
>> + };
>> +
>
> These clocks are neither in the binding nor in the example.
>
ok, I am cleaning this a bit, this will come from DT.
>> +struct exynos_ufs_drv_data exynos_ufs_drvs[] = {
>> +{
>> + .compatible = "samsung,exynos7-ufs",
>> + .uic_attr = &exynos7_uic_attr,
>> + .quirks = UFSHCI_QUIRK_BYTE_ALIGN_UTRD |
>> + UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR |
>> + UFSHCI_QUIRK_BROKEN_HCE |
>> + UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR,
>> + .opts = EXYNOS_UFS_OPT_HAS_APB_CLK_CTRL |
>> + EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL |
>> + EXYNOS_UFS_OPT_BROKEN_RX_SEL_IDX,
>> + .drv_init = exynos7_ufs_drv_init,
>> + .pre_link = exynos7_ufs_pre_link,
>> + .post_link = exynos7_ufs_post_link,
>> + .pre_pwr_change = exynos7_ufs_pre_pwr_change,
>> + .post_pwr_change = exynos7_ufs_post_pwr_change,
>> +}, {
>> +}, };
>
> The indentation is a bit unusual here.
>
hmm..ok will change
>> diff --git a/drivers/scsi/ufs/ufs-exynos-hw.h b/drivers/scsi/ufs/ufs-exynos-hw.h
>> new file mode 100644
>> index 0000000..8464ec8
>> --- /dev/null
>> +++ b/drivers/scsi/ufs/ufs-exynos-hw.h
>> @@ -0,0 +1,43 @@
>> +/*
>> + * UFS Host Controller driver for Exynos specific extensions
>> + *
>> + * Copyright (C) 2014-2015 Samsung Electronics Co., Ltd.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>> +#ifndef _UFS_EXYNOS_HW_H_
>> +#define _UFS_EXYNOS_HW_H_
>> +
>> +#include "ufs-exynos.h"
>> +#include "unipro.h"
>> +
>> +static struct exynos_ufs_uic_attr exynos7_uic_attr = {
>
> You cannot put 'static' variables into a header file.
>
will remove
>> +
>> +/**
>> + * exynos_ufs_auto_ctrl_hcc - HCI core clock control by h/w
>> + * Control should be disabled in the below cases
>> + * - Before host controller S/W reset
>> + * - Access to UFS protector's register
>> + */
>> +static void exynos_ufs_auto_ctrl_hcc(struct exynos_ufs *ufs, bool en)
>> +{
>> + u32 misc = hci_readl(ufs, HCI_MISC);
>> +
>> + if (en)
>> + hci_writel(ufs, misc | HCI_CORECLK_CTRL_EN, HCI_MISC);
>> + else
>> + hci_writel(ufs, misc & ~HCI_CORECLK_CTRL_EN, HCI_MISC);
>
> Does this need a spinlock to ensure the change is done atomically?
>
will check and if needed will add,
>> +}
>> +
>> +static void exynos_ufs_ctrl_clkstop(struct exynos_ufs *ufs, bool en)
>> +{
>> + u32 ctrl = hci_readl(ufs, HCI_CLKSTOP_CTRL);
>> + u32 misc = hci_readl(ufs, HCI_MISC);
>> +
>> + if (en) {
>> + hci_writel(ufs, misc | CLK_CTRL_EN_MASK, HCI_MISC);
>> + hci_writel(ufs, ctrl | CLK_STOP_MASK, HCI_CLKSTOP_CTRL);
>> + } else {
>> + hci_writel(ufs, ctrl & ~CLK_STOP_MASK, HCI_CLKSTOP_CTRL);
>> + hci_writel(ufs, misc & ~CLK_CTRL_EN_MASK, HCI_MISC);
>> + }
>
> same here.
>
>> +
>> +static int exynos_ufs_get_clk_info(struct exynos_ufs *ufs)
>> +{
>> + struct ufs_hba *hba = ufs->hba;
>> + struct list_head *head = &hba->clk_list_head;
>> + struct ufs_clk_info *clki;
>> + u32 pclk_rate;
>> + u32 f_min, f_max;
>> + u8 div = 0;
>> + int ret = 0;
>> +
>> + if (!head || list_empty(head))
>> + goto out;
>> +
>> + list_for_each_entry(clki, head, list) {
>> + if (!IS_ERR_OR_NULL(clki->clk)) {
>> + if (!strcmp(clki->name, "aclk_ufs"))
>> + ufs->clk_hci_core = clki->clk;
>> + else if (!strcmp(clki->name, "sclk_unipro_apb"))
>> + ufs->clk_apb = clki->clk;
>> + else if (!strcmp(clki->name, "sclk_unipro_main"))
>> + ufs->clk_unipro_main = clki->clk;
>> + }
>> + }
>
> Using IS_ERR_OR_NULL is normally a bug. Also the list/loop can likely be
> replaced with another way to express this.
>
ok
>> + do {
>> + delta = h8_time - ktime_us_delta(ktime_get(),
>> + ufs->entry_hibern8_t);
>> + if (delta <= 0)
>> + break;
>> +
>> + us = min_t(s64, delta, USEC_PER_MSEC);
>> + if (us >= 10)
>> + usleep_range(us, us + 10);
>> + else
>> + udelay(us);
>> + } while (1);
>
> us is at least 1000 (USEC_PER_MSEC), so the else clause is never needed.
>
>> +
>> +const struct ufs_hba_variant_ops ufs_hba_exynos_ops = {
>> + .name = "exynos_ufs",
>> + .init = exynos_ufs_init,
>> + .hce_enable_notify = exynos_ufs_hce_enable_notify,
>> + .link_startup_notify = exynos_ufs_link_startup_notify,
>> + .pwr_change_notify = exynos_ufs_pwr_change_notify,
>> + .specify_nexus_t_xfer_req = exynos_ufs_specify_nexus_t_xfer_req,
>> + .specify_nexus_t_tm_req = exynos_ufs_specify_nexus_t_tm_req,
>> + .hibern8_notify = exynos_ufs_hibern8_notify,
>> + .suspend = exynos_ufs_suspend,
>> + .resume = exynos_ufs_resume,
>> +};
>> +EXPORT_SYMBOL(ufs_hba_exynos_ops);
>
> As mentioned in my reply to the build bug report, please restructure the
> driver so this is not a global exported function but gets passed by the
> probe function of the exynos driver into an exported function of the
> common driver.
>
Done,
>> diff --git a/drivers/scsi/ufs/ufs-exynos.h b/drivers/scsi/ufs/ufs-exynos.h
>> new file mode 100644
>> index 0000000..58aa714
>> --- /dev/null
>> +++ b/drivers/scsi/ufs/ufs-exynos.h
>> @@ -0,0 +1,463 @@
>> +/*
>> + * UFS Host Controller driver for Exynos specific extensions
>> + *
>> + * Copyright (C) 2014-2015 Samsung Electronics Co., Ltd.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>> +#ifndef _UFS_EXYNOS_H_
>> +#define _UFS_EXYNOS_H_
>
> You have a lot of things in this header that are only used in one of the
> .c files, so just move them there and make the header as small as possible.
>
hmm..these are mostly the registers defines, will removes the one which
are not being used as of now.
Do you think I should sill move them to .c file?

> Arnd
>


\
 
 \ /
  Last update: 2015-10-13 14:01    [W:0.072 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site