lkml.org 
[lkml]   [2015]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] arm: mvebu: reorder nodes under internal-regs by address in RN2120 .dts file
On Sat, Oct 10, 2015 at 12:10:39AM +0200, Arnaud Ebalard wrote:
>
> This cosmetic patch reorder nodes under internal-regs by increasing
> address order, as epxected.

expected.

Gregory, can you fix that as you commit?

Acked-by: Andrew Lunn <andrew@lunn.ch>

Andrew

>
> Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
> ---
> arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 86 +++++++++++++-------------
> 1 file changed, 43 insertions(+), 43 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
> index 85b2f87c0b8a..d72a69d97ba2 100644
> --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
> +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
> @@ -94,54 +94,11 @@
> status = "disabled";
> };
>
> - /* Two rear eSATA ports */
> - sata@a0000 {
> - nr-ports = <2>;
> - status = "okay";
> - };
> -
> - serial@12000 {
> - status = "okay";
> - };
> -
> - mdio {
> - phy0: ethernet-phy@0 { /* Marvell 88E1318 */
> - reg = <0>;
> - };
> -
> - phy1: ethernet-phy@1 { /* Marvell 88E1318 */
> - reg = <1>;
> - };
> - };
> -
> - ethernet@70000 {
> - status = "okay";
> - phy = <&phy0>;
> - phy-mode = "rgmii-id";
> - };
> -
> - ethernet@74000 {
> - status = "okay";
> - phy = <&phy1>;
> - phy-mode = "rgmii-id";
> - };
> -
> - /* Front USB 2.0 port */
> - usb@50000 {
> - status = "okay";
> - };
> -
> i2c@11000 {
> compatible = "marvell,mv64xxx-i2c";
> clock-frequency = <400000>;
> status = "okay";
>
> - isl12057: isl12057@68 {
> - compatible = "isil,isl12057";
> - reg = <0x68>;
> - isil,irq2-can-wakeup-machine;
> - };
> -
> /* Controller for rear fan #1 of 3 (Protechnic
> * MGT4012XB-O20, 8000RPM) near eSATA port */
> g762_fan1: g762@3e {
> @@ -178,6 +135,49 @@
> compatible = "gmt,g751";
> reg = <0x4c>;
> };
> +
> + isl12057: isl12057@68 {
> + compatible = "isil,isl12057";
> + reg = <0x68>;
> + isil,irq2-can-wakeup-machine;
> + };
> + };
> +
> + serial@12000 {
> + status = "okay";
> + };
> +
> + /* Front USB 2.0 port */
> + usb@50000 {
> + status = "okay";
> + };
> +
> + mdio {
> + phy0: ethernet-phy@0 { /* Marvell 88E1318 */
> + reg = <0>;
> + };
> +
> + phy1: ethernet-phy@1 { /* Marvell 88E1318 */
> + reg = <1>;
> + };
> + };
> +
> + ethernet@70000 {
> + status = "okay";
> + phy = <&phy0>;
> + phy-mode = "rgmii-id";
> + };
> +
> + ethernet@74000 {
> + status = "okay";
> + phy = <&phy1>;
> + phy-mode = "rgmii-id";
> + };
> +
> + /* Two rear eSATA ports */
> + sata@a0000 {
> + nr-ports = <2>;
> + status = "okay";
> };
>
> nand@d0000 {
> --
> 2.5.3
>


\
 
 \ /
  Last update: 2015-10-12 16:41    [W:0.116 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site