lkml.org 
[lkml]   [2015]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/4] sh-pfc: Add emev2 pinmux support
Hi Linus and Laurent,

I know we are coming out of the holiday season so here is a humble ping
on this patchset.

* Niklas Söderlund <niso@kth.se> [2014-12-12 21:01:33 +0100]:

> Greetings,
>
> This patchset introduces pinmux support for the EMMA Mobile EV2 board to
> the sh-pfc pin-controller driver. Devicetree bindings for gpio and the
> populated serial connector are also defined in 3/4 and 4/4.
>
> Comments are welcome!
>
> Regards
> // Niklas
>
> Niklas Söderlund (4):
> sh-pfc: add macro to define pinmux without function
> sh-pfc: Add emev2 pinmux support
> ARM: shmobile: emev2: Add PFC information to emev2.dtsi
> ARM: shmobile: emev2-kzm9d: Add PFC information for uart1
>
> .../bindings/pinctrl/renesas,pfc-pinctrl.txt | 1 +
> arch/arm/boot/dts/emev2-kzm9d.dts | 13 +
> arch/arm/boot/dts/emev2.dtsi | 11 +
> drivers/pinctrl/sh-pfc/Kconfig | 5 +
> drivers/pinctrl/sh-pfc/Makefile | 1 +
> drivers/pinctrl/sh-pfc/core.c | 9 +
> drivers/pinctrl/sh-pfc/core.h | 1 +
> drivers/pinctrl/sh-pfc/pfc-emev2.c | 1915 ++++++++++++++++++++
> drivers/pinctrl/sh-pfc/sh_pfc.h | 2 +
> 9 files changed, 1958 insertions(+)
> create mode 100644 drivers/pinctrl/sh-pfc/pfc-emev2.c
>
> --
> 2.1.3
>


\
 
 \ /
  Last update: 2015-01-09 11:41    [W:0.120 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site