lkml.org 
[lkml]   [2015]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/7] ARM: STi: DT: STiH410: Add usb2 picophy dt nodes
Date
This patch adds the dt nodes for the extra usb2 picophys found on
the stih410.

These two picophys are used in conjunction with the extra ehci/ohci usb
controllers also found on the stih410 SoC.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/boot/dts/stih410.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index c05627e..2e5e9ed 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -10,5 +10,23 @@
#include "stih407-family.dtsi"
#include "stih410-pinctrl.dtsi"
/ {
+ soc {
+ usb2_picophy1: phy2 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xf8 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+ };

+ usb2_picophy2: phy3 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xfc 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY1_RESET>;
+ reset-names = "global", "port";
+ };
+ };
};
--
1.9.1


\
 
 \ /
  Last update: 2015-01-07 16:41    [W:0.149 / U:1.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site