lkml.org 
[lkml]   [2015]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RESEND 3/3] Documentation: Add documentation for rt5033 multifunction device
Thank you for review.

On 01/07/2015 01:54 AM, Rob Herring wrote:
> On Mon, Jan 5, 2015 at 11:45 PM, Beomho Seo <beomho.seo@samsung.com> wrote:
>> This patch device tree binding documentation for rt5033 multifunction device.
>>
>> Cc: Sebastian Reichel <sre@kernel.org>
>> Cc: Lee Jones <lee.jones@linaro.org>
>> Cc: Mark Brown <broonie@kernel.org>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: Pawel Moll <pawel.moll@arm.com>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: Ian campbell <ijc+devicetree@hellion.org.uk>
>> Cc: Kumar Gala <galak@codeaurora.org>
>> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
>> Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
>> ---
>> Documentation/devicetree/bindings/mfd/rt5033.txt | 108 ++++++++++++++++++++
>> .../devicetree/bindings/vendor-prefixes.txt | 1 +
>> 2 files changed, 109 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mfd/rt5033.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/rt5033.txt b/Documentation/devicetree/bindings/mfd/rt5033.txt
>> new file mode 100644
>> index 0000000..52a6d33
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/rt5033.txt
>> @@ -0,0 +1,108 @@
>> +Richtek RT5033 Power management Integrated Circuit
>> +
>> +RT5033 is a Multifunction device which includes battery charger, fuel gauge,
>> +flash LED current source, LDO and synchronous Buck converter for portable
>> +applications. It is interfaced to host controller using i2c interface.
>> +
>> +Required properties:
>> +- compatible : Must be "richtek,rt5033"
>> +- reg : Specifies the i2c slave address of general part.
>> +- interrupts : This i2c devices has an IRQ line connected to the main SoC.
>> +- interrupt-parent : The parent interrupt controller.
>> +
>> +Optional node:
>> +Regulators: The regulators of RT5033 have to be instantiated under sub-node
>> +named "regulators" usinge the following format.
>
> s/usinge/using/
>

I will fix wrong typo.

>> +
>> + regulators {
>> + regulator-name {
>> + regulator-name = LDO/BUCK
>> + regulator subnodes called X, Y and Z
>> + };
>> + };
>> + refer Documentation/devicetree/bindings/regulator/regulator.txt
>> +
>> +
>> +Battery charger: There battery charger of RT5033 have to be instantiated under
>> +sub-node named "charger" using the following format.
>> +
>> +Required properties:
>> +- compatible : Must be "richtek,rt5033-charger".
>> +- richtek,pre-uamp : Current of pre-charge mode. The pre-charge current levels
>> + are 350 mA to 650 mA programmed by I2C per 100 mA.
>> +- richtek,pre-threshold-uvolt : Voltage of threshold pre-charge mode. Battery
>> + voltage is below pre-charge threshold voltage, the charger is in pre-charge
>> + mode with pre-charge current. Its levels are 2.3 V to 3.8 V programmed
>> + by I2C per 0.1 V.
>> +- richtek,fast-uamp : Current of fast-charge mode. The fast-charge current
>> + levels are 700 mA to 2000 mA programmed by I2C per 100 mA.
>> +- richtek,const-uvolt : Battery regulation voltage of constant voltage mode.
>> + This voltage level 3.65 V to 4.4 V bye I2C per 0.025 V.
>> +- richtek,eoc-uamp : This property is end of charge current. Its level 150 mA
>> + to 200 mA.
>
> Please align -uamp and -uvolt names with regulator binding suffixes.
>

OK. I will fix it.

>> + charger {
>> + compatible = "richtek,rt5033-charger";
>> + richtek,pre-uamp = <350000>;
>> + richtek,pre-threshold-uvolt = <3400000>;
>> + richtek,fast-uamp = <2000000>;
>> + richtek,const-uvolt = <4350000>;
>> + richtek,eoc-uamp = <250000>;
>> + };
>> +
>> +
>> +Fuelgauge: There fuelgauge of RT5033 to be instantiated node named "fuelgauge"
>> +using the following format.
>> +
>> +Required properties:
>> +- compatible = Must be "richtek,rt5033-battery".
>> +
>> + i2c_fuel: i2c@1 {
>
> Drop the @1.
>

OK. I will fix it.

>> + compatible = "i2c-gpio";
>> + standard i2c-gpio constraints...
>> + fuelgauge {
>> + compatible = "richtek,rt5033-battery".
>> + };
>> + };
>
> I'm a bit confused by this. The fuelgauge is an i2c device hanging off
> the rt5033 or a 2nd i2c slave on the rt5033?
>

It is 2nd i2c slave on the rt5033.

>> +
>> +
>> +Example:
>> +
>> + rt5033@34 {
>> + compatible = "richtek,rt5033";
>> + reg = <0x34>;
>> + interrupt-parent = <&gpx1>;
>> + interrupts = <5 0>;
>> +
>> + regulators {
>> + buck_reg: BUCK {
>> + regulator-name = "BUCK";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-always-on;
>> + };
>> + };
>> +
>> + charger {
>> + compatible = "richtek,rt5033-charger";
>> + richtek,pre-uamp = <350000>;
>> + richtek,pre-threshold-uvolt = <3400000>;
>> + richtek,fast-uamp = <2000000>;
>> + richtek,const-uvolt = <4350000>;
>> + richtek,eoc-uamp = <250000>;
>> + };
>> +
>> + };
>> +
>> + i2c_fuel: i2c@10 {
>> + compatible = "i2c-gpio";
>> + gpios = <&gpm3 1 0
>> + &gpm3 0 0>;
>> +
>> + fuel: rt5033-battery@35 {
>> + compatible = "richtek,rt5033-battery";
>> + interrupt-parent = <&gpx2>;
>> + interrupts = <3 0>;
>> + reg = <0x35>;
>> + };
>> + };
>> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
>> index 723999d..611b543 100644
>> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
>> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
>> @@ -124,6 +124,7 @@ ralink Mediatek/Ralink Technology Corp.
>> ramtron Ramtron International
>> realtek Realtek Semiconductor Corp.
>> renesas Renesas Electronics Corporation
>> +richtek Richtek Technology Corporation
>> ricoh Ricoh Co. Ltd.
>> rockchip Fuzhou Rockchip Electronics Co., Ltd
>> samsung Samsung Semiconductor
>> --
>> 1.7.9.5
>>
>

Best regards,
Beomho Seo



\
 
 \ /
  Last update: 2015-01-07 01:01    [W:0.097 / U:0.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site