Messages in this thread | | | Date | Mon, 5 Jan 2015 19:05:31 +0100 | From | Andrew Lunn <> | Subject | Re: [PATCH v4 1/1] add support for Seagate BlackArmor NAS220 |
| |
On Sun, Dec 28, 2014 at 11:46:54AM +0100, Evgeni Dobrev wrote: > This patch adds support for Seagate BlackArmor NAS220. > > The Seagate BlackArmor NAS 220 is a NAS system based on Marvell 88f6192. It has > 32MB NAND and 128MB DRAM. It has two SATA slots, one Gigabit Ethernet port, two > USB 2.0 ports, two buttons and three LEDs. There is a serial port available on > the CN5 connector on the board (1 - TX, 4 - RX, 6 - GND). > > The only functionality still not implemented is the bi-color led on the front > panel (status). Pins mpp22 and mpp23 control this led. Setting mpp22 to high and > mpp23 to low results in orange color. Setting mpp22 to low and mpp23 to high > results in blue color. > > The third led is wired to show the SATA activity on the two drives. > > Signed-off-by: Evgeni Dobrev <evgeni@studio-punkt.com>
Hi Evgeni
I added this to mvebu/dt and will submit it for the next merge window.
Thanks Andrew
| |