lkml.org 
[lkml]   [2015]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH]dts: add bcm2835-pwm bindings
Date
To probe the bcm2835-pwm driver properly, this dts bindings has to be added 
to the bcm2835 dtsi file.
In expectation of a bcm2835 clock driver, I've added fixed-clock clock binding.
To change the status of the gpio pins into pwm output pins, some additional
bindings has to be added but this has not to be done automatically.
Is it possible to document this bindings somewhere?

Signed-off-by: Bart Tanghe <bart.tanghe@thomasmore.be>

diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 3342cb1..ba76bb4 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -146,6 +147,14 @@
interrupts = <1 9>;
};

+ pwm: pwm@7E20C000 {
+ compatible = "brcm,bcm2835-pwm";
+ reg = <0x7e20c000 0x28>;
+ clocks = <&clk_pwm>;
+ #pwm-cells = <2>;
+ status = "ok";
+ };
+
arm-pmu {
compatible = "arm,arm1176-pmu";
};
@@ -179,5 +188,13 @@
clock-output-names = "spi";
clock-frequency = <250000000>;
};
+
+ clk_pwm: pwm@3 {
+ compatible = "fixed-clock";
+ reg = <3>;
+ #clock-cells = <0>;
+ clock-output-names = "pwm";
+ clock-frequency = <9200000>;
+ };
};
};

\
 
 \ /
  Last update: 2015-01-05 16:41    [W:0.078 / U:1.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site