lkml.org 
[lkml]   [2015]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.19-rc2 v15 4/8] arm: ks8695: Migrate debug_ll macros to shared directory
Date
As part of the migration a couple of uart definitions have been copied
from of the platform specific header files.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
---
arch/arm/Kconfig.debug | 8 ++++++++
.../include/mach/debug-macro.S => include/debug/ks8695.S} | 10 +++++++---
2 files changed, 15 insertions(+), 3 deletions(-)
rename arch/arm/{mach-ks8695/include/mach/debug-macro.S => include/debug/ks8695.S} (80%)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 6ee9b0d361ee..eba36e35bad2 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -397,6 +397,13 @@ choice
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on KEYSTONE2 devices.

+ config DEBUG_KS8695_UART
+ bool "KS8695 Debug UART"
+ depends on ARCH_KS8695
+ help
+ Say Y here if you want kernel low-level debugging support
+ on KS8695.
+
config DEBUG_MESON_UARTAO
bool "Kernel low-level debugging via Meson6 UARTAO"
depends on ARCH_MESON
@@ -1174,6 +1181,7 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART || \
DEBUG_IMX6SX_UART
+ default "debug/ks8695.S" if DEBUG_KS8695_UART
default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/include/debug/ks8695.S
similarity index 80%
rename from arch/arm/mach-ks8695/include/mach/debug-macro.S
rename to arch/arm/include/debug/ks8695.S
index a79e48981202..961da1f32ab3 100644
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/ks8695.S
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-ks8695/include/mach/debug-macro.S
+ * arch/arm/include/debug/ks8695.S
*
* Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
* Copyright (C) 2006 Simtec Electronics
@@ -11,8 +11,12 @@
* published by the Free Software Foundation.
*/

-#include <mach/hardware.h>
-#include <mach/regs-uart.h>
+#define KS8695_UART_PA 0x03ffe000
+#define KS8695_UART_VA 0xf00fe000
+#define KS8695_URTH (0x04)
+#define KS8695_URLS (0x14)
+#define URLS_URTE (1 << 6)
+#define URLS_URTHRE (1 << 5)

.macro addruart, rp, rv, tmp
ldr \rp, =KS8695_UART_PA @ physical base address
--
1.9.3


\
 
 \ /
  Last update: 2015-01-05 14:01    [W:0.080 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site