[lkml]   [2015]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 06/12] drm: bridge/dw_hdmi: add audio support for more display resolutions
On Fri, Jan 30, 2015 at 06:30:39AM -0500, Yakir Yang wrote:
> Add more n/cts values, in that case we can support audio for more
> display resolutions (128 * SampleRate = PixelClock * N / CTS).

Where do these come from? The iMX6 manuals give the set which are
already in the driver, and says that others are not supported - to

"Table below shows the CTS and N values for the supported standard.
All other TMDS clocks are not supported, the TMDS clocks divided or
multiplied by 1,001 coefficients are not supported."

and the table lists values for TMDS clocks of 25.2, 27, 54, 74.25,
148.5 and 297MHz.

This will need to be tested on iMX6 to validate whether it works.
If it doesn't work, we need to conditionalise the new TMDS clocks
with the IP version.

FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to

 \ /
  Last update: 2015-01-31 12:41    [W:0.222 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site