lkml.org 
[lkml]   [2015]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/11] perf tools: Add feature check for libbabeltrace
Date
Adding feature check for babeltrace library [1], which will be
used for perf data file CTF [2] conversion in following patches.

The babeltrace library is now automatically detected as standard
feature. It's possible to specify LIBBABELTRACE_DIR make variable
to specify location of installed libbabeltrace, like:

$ make LIBBABELTRACE_DIR=/opt/libbabeltrace/
BUILD: Doing 'make -j4' parallel build

Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
... libbabeltrace: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... DWARF post unwind library: libunwind

NOTE The installation of the [1] to to used by above make:
$ ./configure --prefix=/opt/libbabeltrace
$ make prefix=/opt/libbabeltrace
$ sudo make install prefix=/opt/libbabeltrace

[1] babeltrace - http://www.efficios.com/babeltrace
[2] Common Trace Format - http://www.efficios.com/ctf

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
---
tools/perf/Makefile.perf | 4 +++-
tools/perf/config/Makefile | 24 ++++++++++++++++++++++
tools/perf/config/feature-checks/Makefile | 8 ++++++--
tools/perf/config/feature-checks/test-all.c | 5 +++++
.../config/feature-checks/test-libbabeltrace.c | 8 ++++++++
5 files changed, 46 insertions(+), 3 deletions(-)
create mode 100644 tools/perf/config/feature-checks/test-libbabeltrace.c

diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index aa6a50447c32..90b3a20ae98f 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -68,7 +68,9 @@ include config/utilities.mak
# for reading the x32 mode 32-bit compatibility VDSO in 64-bit mode
#
# Define NO_ZLIB if you do not want to support compressed kernel modules
-
+#
+# Define NO_LIBBABELTRACE if you do not want libbabeltrace support
+# for CTF data format.

ifeq ($(srctree),)
srctree := $(patsubst %/,%,$(dir $(shell pwd)))
diff --git a/tools/perf/config/Makefile b/tools/perf/config/Makefile
index cc224080b525..adff95b5f2a3 100644
--- a/tools/perf/config/Makefile
+++ b/tools/perf/config/Makefile
@@ -84,6 +84,17 @@ ifndef NO_LIBELF
FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind := $(LIBDW_LDFLAGS) -ldw
endif

+ifndef NO_LIBBABELTRACE
+ # for linking with debug library, run like:
+ # make DEBUG=1 LIBBABELTRACE_DIR=/opt/libbabeltrace/
+ ifdef LIBBABELTRACE_DIR
+ LIBBABELTRACE_CFLAGS := -I$(LIBBABELTRACE_DIR)/include
+ LIBBABELTRACE_LDFLAGS := -L$(LIBBABELTRACE_DIR)/lib
+ endif
+ FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS)
+ FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf
+endif
+
# include ARCH specific config
-include $(src-perf)/arch/$(ARCH)/Makefile

@@ -202,6 +213,7 @@ CORE_FEATURE_TESTS = \
stackprotector-all \
timerfd \
libdw-dwarf-unwind \
+ libbabeltrace \
zlib

LIB_FEATURE_TESTS = \
@@ -217,6 +229,7 @@ LIB_FEATURE_TESTS = \
libslang \
libunwind \
libdw-dwarf-unwind \
+ libbabeltrace \
zlib

VF_FEATURE_TESTS = \
@@ -667,6 +680,17 @@ else
NO_PERF_READ_VDSOX32 := 1
endif

+ifndef NO_LIBBABELTRACE
+ ifeq ($(feature-libbabeltrace), 0)
+ msg := $(warning No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-devel/libbabeltrace-ctf-dev);
+ NO_LIBBABELTRACE := 1
+ else
+ CFLAGS += -DHAVE_LIBBABELTRACE_SUPPORT $(LIBBABELTRACE_CFLAGS)
+ LDFLAGS += $(LIBBABELTRACE_LDFLAGS)
+ EXTLIBS += -lbabeltrace-ctf
+ endif
+endif
+
# Among the variables below, these:
# perfexecdir
# template_dir
diff --git a/tools/perf/config/feature-checks/Makefile b/tools/perf/config/feature-checks/Makefile
index 42ac05aaf8ac..1fb0d106c953 100644
--- a/tools/perf/config/feature-checks/Makefile
+++ b/tools/perf/config/feature-checks/Makefile
@@ -29,6 +29,7 @@ FILES= \
test-stackprotector-all.bin \
test-timerfd.bin \
test-libdw-dwarf-unwind.bin \
+ test-libbabeltrace.bin \
test-compile-32.bin \
test-compile-x32.bin \
test-zlib.bin
@@ -43,7 +44,7 @@ BUILD = $(CC) $(CFLAGS) -o $(OUTPUT)$@ $(patsubst %.bin,%.c,$@) $(LDFLAGS)
###############################

test-all.bin:
- $(BUILD) -Werror -fstack-protector-all -O2 -Werror -D_FORTIFY_SOURCE=2 -ldw -lelf -lnuma -lelf -laudit -I/usr/include/slang -lslang $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null) $(FLAGS_PERL_EMBED) $(FLAGS_PYTHON_EMBED) -DPACKAGE='"perf"' -lbfd -ldl -lz
+ $(BUILD) -Werror -fstack-protector-all -O2 -Werror -D_FORTIFY_SOURCE=2 -ldw -lelf -lnuma -lelf -laudit -I/usr/include/slang -lslang $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null) $(FLAGS_PERL_EMBED) $(FLAGS_PYTHON_EMBED) -DPACKAGE='"perf"' -lbfd -ldl -lz -lbabeltrace

test-hello.bin:
$(BUILD)
@@ -133,7 +134,10 @@ test-timerfd.bin:
$(BUILD)

test-libdw-dwarf-unwind.bin:
- $(BUILD)
+ $(BUILD) # -ldw provided by $(FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind)
+
+test-libbabeltrace.bin:
+ $(BUILD) # -lbabeltrace provided by $(FEATURE_CHECK_LDFLAGS-libbabeltrace)

test-sync-compare-and-swap.bin:
$(BUILD) -Werror
diff --git a/tools/perf/config/feature-checks/test-all.c b/tools/perf/config/feature-checks/test-all.c
index 6d4d09323922..1ffc3da5ca10 100644
--- a/tools/perf/config/feature-checks/test-all.c
+++ b/tools/perf/config/feature-checks/test-all.c
@@ -101,6 +101,10 @@
# include "test-pthread_attr_setaffinity_np.c"
#undef main

+#define main main_test_libbabeltrace
+# include "test-libbabeltrace.c"
+#undef main
+
int main(int argc, char *argv[])
{
main_test_libpython();
@@ -126,6 +130,7 @@ int main(int argc, char *argv[])
main_test_sync_compare_and_swap(argc, argv);
main_test_zlib();
main_test_pthread_attr_setaffinity_np();
+ main_test_libbabeltrace();

return 0;
}
diff --git a/tools/perf/config/feature-checks/test-libbabeltrace.c b/tools/perf/config/feature-checks/test-libbabeltrace.c
new file mode 100644
index 000000000000..3b7dd68a4d52
--- /dev/null
+++ b/tools/perf/config/feature-checks/test-libbabeltrace.c
@@ -0,0 +1,8 @@
+
+#include <babeltrace/ctf-writer/writer.h>
+
+int main(void)
+{
+ bt_ctf_stream_class_get_packet_context_type((void *) 0);
+ return 0;
+}
--
1.9.3


\
 
 \ /
  Last update: 2015-01-30 12:01    [W:0.064 / U:5.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site