[lkml]   [2015]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v4 2/3] irqchip: vf610-mscm: dt-bindings: add MSCM bindings
Add binding documentation for CPU configuration and interrupt router
submodule of the Miscellaneous System Control Module. The MSCM is
used in all variants of Freescale Vybrid SoC's.

Acked-by: Marc Zyngier <>
Signed-off-by: Stefan Agner <>
.../arm/freescale/fsl,vf610-mscm-cpucfg.txt | 14 +++++++++
.../bindings/arm/freescale/fsl,vf610-mscm-ir.txt | 33 ++++++++++++++++++++++
2 files changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt

diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
new file mode 100644
index 0000000..44aa3c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
@@ -0,0 +1,14 @@
+Freescale Vybrid Miscellaneous System Control - CPU Configuration
+The MSCM IP contains multiple sub modules, this binding describes the first
+block of registers which contains CPU configuration information.
+Required properties:
+- compatible: "fsl,vf610-mscm-cpucfg", "syscon"
+- reg: the register range of the MSCM CPU configuration registers
+ mscm_cpucfg: cpucfg@40001000 {
+ compatible = "fsl,vf610-mscm-cpucfg", "syscon";
+ reg = <0x40001000 0x800>;
+ }
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
new file mode 100644
index 0000000..669808b2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
@@ -0,0 +1,33 @@
+Freescale Vybrid Miscellaneous System Control - Interrupt Router
+The MSCM IP contains multiple sub modules, this binding describes the second
+block of registers which control the interrupt router. The interrupt router
+allows to configure the recipient of each peripheral interrupt. Furthermore
+it controls the directed processor interrupts. The module is available in all
+Vybrid SoC's but is only really useful in dual core configurations (VF6xx
+which comes with a Cortex-A5/Cortex-M4 combination).
+Required properties:
+- compatible: "fsl,vf610-mscm-ir"
+- reg: the register range of the MSCM Interrupt Router
+- fsl,cpucfg: The handle to the MSCM CPU configuration node, required
+ to get the current CPU ID
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: Two cells, interrupt number and cells.
+ The hardware interrupt number according to interrupt
+ assignment of the interrupt router is required.
+ Flags get passed only when using GIC as parent. Flags
+ encoding as documented by the GIC bindings.
+- interrupt-parent: Should be the phandle for the interrupt controller of
+ the CPU the device tree is intended to be used on. This
+ is either the node of the GIC or NVIC controller.
+ mscm_ir: interrupt-controller@40001800 {
+ compatible = "fsl,vf610-mscm-ir";
+ reg = <0x40001800 0x400>;
+ fsl,cpucfg = <&mscm_cpucfg>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ }

 \ /
  Last update: 2015-01-30 11:41    [W:0.033 / U:2.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site