lkml.org 
[lkml]   [2015]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH manpages 1/2] modify_ldt.2: Overhaul the documentation
Date
This clarifies the behavior and documents all four functions.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
---
man2/modify_ldt.2 | 101 +++++++++++++++++++++++++++++++++++++++++-------------
1 file changed, 78 insertions(+), 23 deletions(-)

diff --git a/man2/modify_ldt.2 b/man2/modify_ldt.2
index d128664716c6..f3cc94d397b3 100644
--- a/man2/modify_ldt.2
+++ b/man2/modify_ldt.2
@@ -1,4 +1,5 @@
.\" Copyright (c) 1995 Michael Chastain (mec@duracef.shout.net), 22 July 1995.
+.\" Copyright (c) 2015 Andrew Lutomirski
.\"
.\" %%%LICENSE_START(GPLv2+_DOC_FULL)
.\" This is free documentation; you can redistribute it and/or
@@ -23,37 +24,43 @@
.\"
.TH MODIFY_LDT 2 2012-07-13 "Linux" "Linux Programmer's Manual"
.SH NAME
-modify_ldt \- get or set ldt
+modify_ldt \- get or set a per-process LDT entry
.SH SYNOPSIS
.nf
.B #include <sys/types.h>
.sp
.BI "int modify_ldt(int " "func" ", void *" "ptr" ", unsigned long " "bytecount" );
.fi
-
+.PP
.IR Note :
There is no glibc wrapper for this system call; see NOTES.
.SH DESCRIPTION
.BR modify_ldt ()
-reads or writes the local descriptor table (ldt) for a process.
-The ldt is a per-process memory management table used by the i386 processor.
-For more information on this table, see an Intel 386 processor handbook.
+reads or writes the local descriptor table (LDT) for a process. The LDT
+is an array of segment descriptors that can be referenced by user code.
+Linux allows processes to configure a per-process (actually per-mm) LDT.
+For more information about the LDT, see the Intel Software Developer's
+Manual or the AMD Architecture Programming Manual.
.PP
When
.I func
is 0,
.BR modify_ldt ()
-reads the ldt into the memory pointed to by
+reads the LDT into the memory pointed to by
.IR ptr .
The number of bytes read is the smaller of
.I bytecount
-and the actual size of the ldt.
+and the actual size of the LDT, although the kernel may act as though
+the LDT is padded with additional trailing zero bytes. On success,
+.BR modify_ldt ()
+will return the number of bytes read.
.PP
When
.I func
-is 1,
+is 1 or 0x11,
.BR modify_ldt ()
-modifies one ldt entry.
+modifies the LDT entry indicated by
+.I ptr\->entry_number.
.I ptr
points to a
.I user_desc
@@ -61,11 +68,6 @@ structure
and
.I bytecount
must equal the size of this structure.
-.\"
-.\" FIXME Should this page say something about func == 2 and func == 0x11?
-.\" In Linux 2.4, func == 2 returned "the default ldt"
-.\" In Linux 2.6, func == 2 is a nop, returning a zeroed out structure.
-.\" Linux 2.4 and 2.6 implement an operation for func == 0x11

The
.I user_desc
@@ -89,12 +91,44 @@ struct user_desc {
.PP
In Linux 2.4 and earlier, this structure was named
.IR modify_ldt_ldt_s .
-.\" .PP
-.\" The ldt is specific for the calling process. Any attempts to change
-.\" the ldt to include the address space of another process or the kernel
-.\" will result in a segmentation violation when trying to access the memory
-.\" outside of the process address space. The memory protection is enforced
-.\" at the paging layer.
+.PP
+The
+.I contents
+field is the segment type (data, expand-down data, non-conforming code, or
+conforming code). The other fields match their descriptions in the
+CPU manual, although
+.BR modify_ldt ()
+cannot set the accessed bit.
+.PP
+A
+.I user_desc
+is considered "empty" if
+.I read_exec_only
+and
+.I seg_not_present
+are set to 1 and all of the other fields are 0.
+An LDT entry can be cleared by setting it to an "empty"
+.I user_desc
+or, if
+.I func
+is 1, by setting both
+.I base
+and
+.I limit
+to 0.
+.PP
+A conforming code segment will be rejected if
+.I
+func
+is 1 or if
+.I seg_not_present
+is 0.
+.PP
+When
+.I func
+is 2,
+.BR modify_ldt ()
+will read zeros. This appears to be a leftover from Linux 2.4.
.SH RETURN VALUE
On success,
.BR modify_ldt ()
@@ -119,19 +153,40 @@ or
is 1 and
.I bytecount
is not equal to the size of the structure
-.IR modify_ldt_ldt_s ,
+.IR user_desc ,
or
.I func
-is 1 and the new ldt entry has invalid values.
+is 1 or 0x11 and the new ldt entry has invalid values.
.TP
.B ENOSYS
.I func
-is neither 0 nor 1.
+is neither 0, 1, 2, nor 0x11.
.SH CONFORMING TO
This call is Linux-specific and should not be used in programs intended
to be portable.
+.SH BUGS
+On 64-bit kernels before Linux 3.19, one of the padding bits in
+.I user_desc,
+if set, would prevent the descriptor from being considered empty.
.SH NOTES
Glibc does not provide a wrapper for this system call; call it using
.BR syscall (2).
+.PP
+.BR modify_ldt ()
+should not be used for thread-local storage, as it slows down context
+switches and only supports a limited number of threads. Threading libraries
+should use
+.BR set_thread_area (2)
+or
+.BR arch_prctl (2)
+instead, except on extremely old kernels that do not support those system
+calls.
+.PP
+The normal use for
+.BR modify_ldt (2)
+is to run legacy 16-bit or segmented 32-bit code. Not all kernels allow
+16-bit segments to be installed, however.
.SH SEE ALSO
+.BR set_thread_area (2),
+.BR arch_prctl (2),
.BR vm86 (2)
--
2.1.0


\
 
 \ /
  Last update: 2015-01-29 23:01    [W:0.082 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site