lkml.org 
[lkml]   [2015]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 11/13] pm: at91: remove the at91_xxx_standby() function definitions in the pm.h
Date
Because the the suspend to standby mode uses the sram function,
these functions will not used, remove the redundant code.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/pm.h | 97 -----------------------------------------------
1 file changed, 97 deletions(-)

diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 5bc9c33..158575e 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -12,7 +12,6 @@
#define __ARCH_ARM_MACH_AT91_PM

#include <asm/proc-fns.h>
-
#include <mach/at91_ramc.h>

#define AT91_PM_MEMCTRL_MASK 0x0f
@@ -22,100 +21,4 @@

#define AT91_PM_SLOW_CLOCK 0x01

-#ifdef CONFIG_PM
-extern void at91_pm_set_standby(void (*at91_standby)(void));
-#else
-static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
-#endif
-
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- *
- * Self-refresh mode is exited as soon as a memory access is made, but we don't
- * know for sure when that happens. However, we need to restore the low-power
- * mode if it was enabled before going idle. Restoring low-power mode while
- * still in self-refresh is "not recommended", but seems to work.
- */
-
-static inline void at91rm9200_standby(void)
-{
- u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
-
- asm volatile(
- "b 1f\n\t"
- ".align 5\n\t"
- "1: mcr p15, 0, %0, c7, c10, 4\n\t"
- " str %0, [%1, %2]\n\t"
- " str %3, [%1, %4]\n\t"
- " mcr p15, 0, %0, c7, c0, 4\n\t"
- " str %5, [%1, %2]"
- :
- : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
- "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
- "r" (lpr));
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91_ddr_standby(void)
-{
- /* Those two values allow us to delay self-refresh activation
- * to the maximum. */
- u32 lpr0, lpr1 = 0;
- u32 saved_lpr0, saved_lpr1 = 0;
-
- if (at91_ramc_base[1]) {
- saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
- lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
- lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
- }
-
- saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
- lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
- lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
-
- /* self-refresh mode now */
- at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
-
- cpu_do_idle();
-
- at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91sam9_sdram_standby(void)
-{
- u32 lpr0, lpr1 = 0;
- u32 saved_lpr0, saved_lpr1 = 0;
-
- if (at91_ramc_base[1]) {
- saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
- lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
- lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
- }
-
- saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
- lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
- lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
-
- /* self-refresh mode now */
- at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
-
- cpu_do_idle();
-
- at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
-}
-
#endif
--
1.7.9.5


\
 
 \ /
  Last update: 2015-01-29 08:21    [W:0.122 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site