lkml.org 
[lkml]   [2015]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/8] usb: add bus type for USB ULPI
Hi,

On Fri, Jan 23, 2015 at 05:12:51PM +0200, Heikki Krogerus wrote:
> @@ -6,4 +6,5 @@ obj-$(CONFIG_USB_COMMON) += usb-common.o
> usb-common-y += common.o
> usb-common-$(CONFIG_USB_LED_TRIG) += led.o
>
> -obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o
> +obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o

a bit of unrelated change here.

> diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
> index cc0ced0..c0fc3b5 100644
> --- a/drivers/usb/core/Kconfig
> +++ b/drivers/usb/core/Kconfig
> @@ -84,3 +84,11 @@ config USB_OTG_FSM
> Implements OTG Finite State Machine as specified in On-The-Go
> and Embedded Host Supplement to the USB Revision 2.0 Specification.
>
> +config USB_ULPI_BUS
> + bool "USB ULPI PHY interface support"
> + depends on USB || USB_GADGET

depends on USB_SUPPORT ?

> +int ulpi_register_driver(struct ulpi_driver *drv);
> +void ulpi_unregister_driver(struct ulpi_driver *drv);
> +
> +#define module_ulpi_driver(__ulpi_driver) \
> + module_driver(__ulpi_driver, ulpi_register_driver, \
> + ulpi_unregister_driver)
> +
> +int ulpi_read(struct ulpi *ulpi, u8 addr);
> +int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val);

no stubs ?

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-01-29 06:21    [W:0.111 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site