lkml.org 
[lkml]   [2015]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 0/5] drivers: bus: Add Simple Power-Managed Bus
Date
Geert Uytterhoeven <geert+renesas@glider.be> writes:

> Hi all,
>
> The Renesas Bus State Controller (BSC) provides an external bus for
> connecting multiple external devices to an SoC, driving several chip
> select lines, for e.g. NOR FLASH, Ethernet and USB.
> On the kzm9g and ape6evm development boards, an smsc9220 Ethernet
> controller is connnected to the BSC of an SH-Mobile AG5 (sh73a0) resp.
> R-Mobile APE6 (r8a73a4) SoC.
>
> The BSC is a fairly simple memory-mapped bus, hence a "simple-bus"
> compatibility seems suitable. However, the BSC is special in two
> ways:
> 1. It is part of a PM domain (A4S on sh73a0),
> 2. It has a gateable functional clock (ZB).
> Before a device connected to the BSC can be accessed, the PM domain
> containing the BSC must be powered on, and the functional clock
> driving the BSC must be enabled.
>
> Both special properties can be described in DT in a standardized way
> ("power-domains = <&pd_a4s>" and "clocks = <&zb_clk>", cfr. the
> example in the DT binding documentation). Externally connected
> devices are described as children of the BSC node.
>
> Unfortunately this doesn't mean everything will work out-of-the-box.
> There are two problems:
> 1. Without a device driver bound to the bus device, this device is
> not attached to the PM domain. And although a child device is
> present and active, the PM domain may be powered down, as it's
> considered unused by the PM domain core.
> 2. Without a device driver calling pm_runtime_enable(), its
> functional clock is not enabled. Once runtime PM is enabled, the
> R-Mobile PM domain platform driver manages the functional clock
> using runtime PM.
>
> As none of the above is really bus hardware-specific (PM domains and
> functional clocks in clock domains are handled from genpd and platform
> code), this series adds a Simple Power-Managed Bus driver for
> transparent busses, which matches against "simple-pm-bus", enables
> runtime PM for the bus device, and calls of_platform_populate() to
> probe for child devices.
> Due to the child-parent relationship of devices connected to the bus,
> as long as the device drivers for the child devices are runtime PM
> enabled, the bus's PM domain will be powered, and the bus's clock will
> be enabled automatically when needed, for both runtime PM and s2ram.
>
> This was tested on sh73a0/kzm9g-multiplatform (by me), and (v3) on
> r8a73a4/ape6evm-multiplatform (by Ulrich Hecht). Without this,
> Ethernet doesn't work, as the ZB clock is disabled by
> clk_disable_unused().
>
> Felipe: It looks like drivers/usb/musb/musb_am335x.c can be removed, if
> "ti,am33xx-usb" claims compatibility with "simple-pm-bus"?
>
> As drivers/bus doesn't have a maintainer, and this driver is needed to
> move two shmobile platforms away from legacy to multiplatform, I think
> this can go in through Simon's shmobile tree.
>
> Changes compared to v3:
> - Replace "simple-bus" by "simple-pm-bus" in the bindings,
> - Move the "renesas,bsc" bindings to a separate document,
> - Bind against the generic "simple-pm-bus" instead of "renesas,bsc",
> - Explicitly call of_platform_populate() after pm_runtime_enable() to
> enforce ordering, instead of depending on claimed compatibility with
> "simple-bus".
>
> Changes compared to v2:
> - Document required properties inherited from "simple-bus",
> - Document required "reg" property for "renesas,bsc",
> - Move "ranges" before "reg" in the example,
> - Add Tested-by,
> - Split-off sh73a0/kzm9g and r8a73a4/ape6evm DTS updates.
>
> Changes compared to v1 (more detailed change logs in the individual
> patches):
> - Added sorting of drivers/bus Kconfig and Makefile entries,
> - Added DT binding documentation,
> - Rename from "Renesas Bus State Controller Driver" (renesas-bsc) to
> "Simple Power-Managed Bus Driver" (simple-pm-bus),
> - Postponed adding power-domains properties to the dtsi,
> - Added updates for r8a73a4/ape6evm.
>
> Thanks for your comments!

Reviewed-by: Kevin Hilman <khilman@linaro.org>


\
 
 \ /
  Last update: 2015-01-27 19:01    [W:0.104 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site