lkml.org 
[lkml]   [2015]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 2/2] tty/serial: Add Spreadtrum sc9836-uart driver support
Hi Chunyan,

Minor but important fixes below.

And for the v9 version, please only use "To:" for
"Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

All other recipients should only be Cc:

Regards,
Peter Hurley


On 01/27/2015 02:56 AM, Chunyan Zhang wrote:
> Add a full sc9836-uart driver for SC9836 SoC which is based on the
> spreadtrum sharkl64 platform.
> This driver also support earlycon.

[...]

> +static int sprd_probe_dt_alias(int index, struct device *dev)
> +{
> + struct device_node *np;
> + static bool seen_dev_with_alias;
> + static bool seen_dev_without_alias;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

delete these two lines; these were used for the message deleted in a
previous patch version.

> + int ret = index;
> +
> + if (!IS_ENABLED(CONFIG_OF))
> + return ret;
> +
> + np = dev->of_node;
> + if (!np)
> + return ret;
> +
> + ret = of_alias_get_id(np, "serial");
> + if (IS_ERR_VALUE(ret)) {
> + seen_dev_without_alias = true;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
delete this line.

> + ret = index;
> + } else {
> + seen_dev_with_alias = true;
^^^^^^^^^^^^^^^^^^^^^^^^^^^
delete this line.

> + if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) {
> + dev_warn(dev, "requested serial port %d not available.\n", ret);
> + ret = index;
> + }
> + }

Simplify the entire "if (IS_ERR_VALUE(ret))" statement to:

if (IS_ERR_VALUE(ret))
ret = index;
else if (ret >= ..................) {
dev_warn(.....);
ret = index;
}


> +
> + return ret;
> +}
> +
> +static int sprd_remove(struct platform_device *dev)
> +{
> + struct sprd_uart_port *sup = platform_get_drvdata(dev);
> +
> + if (sup) {
> + uart_remove_one_port(&sprd_uart_driver, &sup->port);
> + sprd_port[sup->port.line] = NULL;
> + sprd_ports_num--;
> + }
> +
> + if (!sprd_ports_num)
> + uart_unregister_driver(&sprd_uart_driver);
> +
> + return 0;
> +}
> +
> +static int sprd_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + struct uart_port *up;
> + struct clk *clk;
> + int irq;
> + int index;
> + int ret;
> +
> + for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
> + if (sprd_port[index] == NULL)
> + break;
> +
> + if (index == ARRAY_SIZE(sprd_port))
> + return -EBUSY;
> +
> + index = sprd_probe_dt_alias(index, &pdev->dev);
> +
> + sprd_port[index] = devm_kzalloc(&pdev->dev,
> + sizeof(*sprd_port[index]), GFP_KERNEL);
> + if (!sprd_port[index])
> + return -ENOMEM;
> +
> + pdev->id = index;
^^^^^^^^^^^^^^^^
delete this line.

The platform device id cannot be assigned by the driver.
(This was left over from trying to fix sprd_suspend/sprd_resume
but that's fixed correctly now.)

> +
> + up = &sprd_port[index]->port;
> + up->dev = &pdev->dev;
> + up->line = index;
> + up->type = PORT_SPRD;
> + up->iotype = SERIAL_IO_PORT;
> + up->uartclk = SPRD_DEF_RATE;
> + up->fifosize = SPRD_FIFO_SIZE;
> + up->ops = &serial_sprd_ops;
> + up->flags = UPF_BOOT_AUTOCONF;
> +
> + clk = devm_clk_get(&pdev->dev, NULL);
> + if (!IS_ERR(clk))
> + up->uartclk = clk_get_rate(clk);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(&pdev->dev, "not provide mem resource\n");
> + return -ENODEV;
> + }
> + up->mapbase = res->start;
> + up->membase = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(up->membase))
> + return PTR_ERR(up->membase);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + dev_err(&pdev->dev, "not provide irq resource\n");
> + return -ENODEV;
> + }
> + up->irq = irq;
> +
> + if (!sprd_ports_num) {
> + ret = uart_register_driver(&sprd_uart_driver);
> + if (ret < 0) {
> + pr_err("Failed to register SPRD-UART driver\n");
> + return ret;
> + }
> + }
> + sprd_ports_num++;
> +
> + ret = uart_add_one_port(&sprd_uart_driver, up);
> + if (ret) {
> + sprd_port[index] = NULL;
> + sprd_remove(pdev);
> + }
> +
> + platform_set_drvdata(pdev, up);
> +
> + return ret;
> +}



\
 
 \ /
  Last update: 2015-01-27 16:01    [W:0.087 / U:1.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site