lkml.org 
[lkml]   [2015]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] watchdog: dw_wdt: pat the watchdog before enabling it
Dear Guenter,

On Mon, 26 Jan 2015 20:08:04 -0800
Guenter Roeck <linux@roeck-us.net> wrote:

> On 01/26/2015 07:49 PM, Jisheng Zhang wrote:
> > Dear Doug,
> >
> > On Mon, 26 Jan 2015 15:27:15 -0800
> > Doug Anderson <dianders@chromium.org> wrote:
> >
> >> On some dw_wdt implementations the "top" register may be initted to 0
> >> at bootup. In such a case, each "pat" of the watchdog will reset the
> >> timer to 0xffff. That's pretty short.
> >>
> >> The input clock of the wdt can be any of a wide range of values. On
> >> an rk3288 system, I've seen the wdt clock be 24.75 MHz. That means
> >> each tick is ~40ns and we'll count to 0xffff in ~2.6ms.
> >>
> >> Because of the above two facts, it's a really good idea to pat the
> >> watchdog after initting the "top" register properly and before
> >> enabling the watchdog. If you don't then there's no way we'll get the
> >> next heartbeat in time.
> >>
> >> Jisheng Zhang fixed this problem on some dw_mmc versions by using the
> >
> > s/dw_mmc/dw_wdt
> >
> >> TOP_INIT feature. However, the dw_wdt on rk3288 doesn't have TOP_INIT
> >> so it's a good idea to also pat the watchdog manually.
> >
> > Based on your register dumping, I see the following configurations on
> > rk3288:
> >
> > WDT_DUAL_TOP is configured as false, so there's no TOP_INIT
> >
> > WDT_DFLT_TOP is configured as 0, so it will timeout soon.
> >
> >
> > So an extra pat is a must on such platforms with similar configurations.
> > And it doesn't hurt anything if we have an extra pat before enabling the
> > WDT
> >
> > All in all, except the "dw_mmc" typo above, the patch looks good to me.
> >
>
> Jisheng,
>
> it would be great if you can provide configuration information shown in
> the (undocumented) registers.

The wdt in rk3288 is a bit old, so I'm not sure whether the meaning is the same
or not. The key related configuration here is the so called CP_WDT_DUAL_TOP, bit[2]
of WDT_COMP_PARAMS_1 (0xf4), which indicates whether the TOP_INIT bits exist or
fixed as zero.

Thanks,
Jisheng

>
> Doug,
>
> can you send another version with this information added as comment
> to the code ? This will help others to understand what is going on
> (and why) later on.
>
> Thanks,
> Guenter
>



\
 
 \ /
  Last update: 2015-01-27 06:01    [W:0.047 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site