lkml.org 
[lkml]   [2015]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] gpio: pxa: add PXA1928 gpio type support
Date
Add support for PXA1928 GPIOs. The PXA1928 adds a 6th bank from previous
generations.

Signed-off-by: Jing Xiang <jxiang@marvell.com>
Signed-off-by: Xiangzhan Meng <mengxzh@marvell.com>
[robh: ported to 3.19 from vendor kernel]
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
---
drivers/gpio/gpio-pxa.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index b4fb8de..2fdb04b 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -41,9 +41,12 @@
* BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
* BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
*
+ * BANK 6 - 0x0200 0x020C 0x0218 0x0224 0x0230 0x023C 0x0248
+ *
* NOTE:
* BANK 3 is only available on PXA27x and later processors.
- * BANK 4 and 5 are only available on PXA935
+ * BANK 4 and 5 are only available on PXA935, PXA1928
+ * BANK 6 is only available on PXA1928
*/

#define GPLR_OFFSET 0x00
@@ -56,7 +59,8 @@
#define GAFR_OFFSET 0x54
#define ED_MASK_OFFSET 0x9C /* GPIO edge detection for AP side */

-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : ((n) > 5 ? 0x200 : 0x100) \
+ + (((n) % 3) << 2))

int pxa_last_gpio;
static int irq_base;
@@ -92,6 +96,7 @@ enum pxa_gpio_type {
PXA93X_GPIO,
MMP_GPIO = 0x10,
MMP2_GPIO,
+ PXA1928_GPIO,
};

struct pxa_gpio_id {
@@ -139,6 +144,11 @@ static struct pxa_gpio_id mmp2_id = {
.gpio_nums = 192,
};

+static struct pxa_gpio_id pxa1928_id = {
+ .type = PXA1928_GPIO,
+ .gpio_nums = 224,
+};
+
#define for_each_gpio_chip(i, c) \
for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)

@@ -486,6 +496,7 @@ static int pxa_gpio_nums(struct platform_device *pdev)
case PXA93X_GPIO:
case MMP_GPIO:
case MMP2_GPIO:
+ case PXA1928_GPIO:
gpio_type = pxa_id->type;
count = pxa_id->gpio_nums - 1;
break;
@@ -505,6 +516,7 @@ static const struct of_device_id pxa_gpio_dt_ids[] = {
{ .compatible = "marvell,pxa93x-gpio", .data = &pxa93x_id, },
{ .compatible = "marvell,mmp-gpio", .data = &mmp_id, },
{ .compatible = "marvell,mmp2-gpio", .data = &mmp2_id, },
+ { .compatible = "marvell,pxa1928-gpio", .data = &pxa1928_id, },
{}
};

@@ -666,6 +678,7 @@ static const struct platform_device_id gpio_id_table[] = {
{ "pxa93x-gpio", (unsigned long)&pxa93x_id },
{ "mmp-gpio", (unsigned long)&mmp_id },
{ "mmp2-gpio", (unsigned long)&mmp2_id },
+ { "pxa1928-gpio", (unsigned long)&pxa1928_id },
{ },
};

--
2.1.0


\
 
 \ /
  Last update: 2015-01-27 06:01    [W:0.064 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site