lkml.org 
[lkml]   [2015]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 4/4] sound: jz4740: Enable codec clock during dai_probe

On 26/01/15 10:40, Lars-Peter Clausen wrote:
> On 01/26/2015 11:18 AM, Zubair Lutfullah Kakakhel wrote:
>> As we are moving away from platform to DT, we cant rely on the board
>> file to do this now. So enable it here.
>
> I don't understand this changelog. The board file never did this. The driver enables the clock in the startup() callback.

My bad.

I couldn't get the ci20 audio to work without this change.

I double checked. The clock is indeed enabled.

But the rate needs to be set for the ci20.

clk_set_rate(i2s->clk_i2s, 12000000);

Where should I put it? I couldn’t trace how the rate is set for the jz4740..

ZubairLK

>
>>
>> Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
>> ---
>> sound/soc/jz4740/jz4740-i2s.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c
>> index 3c309fc..a7e4a7b 100644
>> --- a/sound/soc/jz4740/jz4740-i2s.c
>> +++ b/sound/soc/jz4740/jz4740-i2s.c
>> @@ -376,6 +376,10 @@ static int jz4740_i2s_dai_probe(struct snd_soc_dai *dai)
>> JZ_AIC_CONF_I2S |
>> JZ_AIC_CONF_INTERNAL_CODEC;
>>
>> + /* enable codec sysclk */
>> + clk_set_rate(i2s->clk_i2s, 12000000);
>> + clk_prepare_enable(i2s->clk_i2s);
>> +
>> jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, JZ_AIC_CONF_RESET);
>> jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, conf);
>>
>>
>


\
 
 \ /
  Last update: 2015-01-26 12:41    [W:1.821 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site