lkml.org 
[lkml]   [2015]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] IPVS: add wlib & wlip schedulers

Hello,

On Tue, 20 Jan 2015, Chris Caputo wrote:

> My application consists of incoming TCP streams being load balanced to
> servers which receive the feeds. These are long lived multi-gigabyte
> streams, and so I believe the estimator's 2-second timer is fine. As an
> example:
>
> # cat /proc/net/ip_vs_stats
> Total Incoming Outgoing Incoming Outgoing
> Conns Packets Packets Bytes Bytes
> 9AB 58B7C17 0 1237CA2C325 0
>
> Conns/s Pkts/s Pkts/s Bytes/s Bytes/s
> 1 387C 0 B16C4AE 0

All other schedulers react and see different
picture after every new connection. The worst example
is WLC where slow-start mechanism is desired because
idle server can be overloaded before the load is noticed
properly. Even WRR accounts every connection in its state.

Your setup may expect low number of connections per
second but for other kind of setups sending all connections
to same server for 2 seconds looks scary. In fact, what
changes is the position, so we rotate only among the
least loaded servers that look equally loaded but it is
one server in the common case. And as our stats are per
CPU and designed for human reading, it is difficult to
read them often for other purposes. We need a good idea
to solve this problem, so that we can have faster feedback
after every scheduling.

> > May be not so useful idea: use sum of both directions
> > or control it with svc->flags & IP_VS_SVC_F_SCHED_WLIB_xxx
> > flags, see how "sh" scheduler supports flags. I.e.
> > inbps + outbps.
>
> I see a user-mode option as increasing complexity. For example,
> keepalived users would need to have keepalived patched to support the new
> algorithm, due to flags, rather than just configuring "wlib" or "wlip" and
> it just working.

That is also true.

> I think I'd rather see a wlob/wlop version for users that want to
> load-balance based on outgoing bytes/packets, and a wlb/wlp version for
> users that want them summed.

ok

> From: Chris Caputo <ccaputo@alt.net>
>
> IPVS: Change inbps and outbps to 64-bits so that estimator handles faster
> flows. Also increases maximum viewable at user level from ~2.15Gbits/s to
> ~34.35Gbits/s.

Yep, we are limited from u32 in user space structs.
I have to think how to solve this problem.

1gbit => ~1.5 million pps
10gbit => ~15 million pps
100gbit => ~150 million pps

> Signed-off-by: Chris Caputo <ccaputo@alt.net>
> ---
> diff -uprN linux-3.19-rc5-stock/include/net/ip_vs.h linux-3.19-rc5/include/net/ip_vs.h
> --- linux-3.19-rc5-stock/include/net/ip_vs.h 2015-01-18 06:02:20.000000000 +0000
> +++ linux-3.19-rc5/include/net/ip_vs.h 2015-01-20 08:01:15.548177969 +0000
> @@ -390,8 +390,8 @@ struct ip_vs_estimator {
> u32 cps;
> u32 inpps;
> u32 outpps;
> - u32 inbps;
> - u32 outbps;
> + u64 inbps;
> + u64 outbps;

Not sure, may be everything here should be u64 because
we have shifted values. I'll need some days to investigate
this issue...

Regards

--
Julian Anastasov <ja@ssi.bg>


\
 
 \ /
  Last update: 2015-01-23 08:21    [W:1.324 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site