lkml.org 
[lkml]   [2015]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v9 3/5] regulators: axp20x: Use "clock-frequency" property for dcdc work frequency
Date
Since the dcdc regulator work frequency is a property of the regulators
DT sub-tree, there is no issue of naming collisions, so we can use the
standard "clock-frequency" binding for this.

The driver sets a reasonable default value (same as the datasheet), and
only 1 dts has the old binding, with the default value.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
drivers/regulator/axp20x-regulator.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index e4331f5e5d7d..990ac453abc8 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -186,8 +186,10 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev)
if (!regulators) {
dev_warn(&pdev->dev, "regulators node not found\n");
} else {
- dcdcfreq = 1500;
- of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq);
+ dcdcfreq = 1500000;
+ of_property_read_u32(regulators, "clock-frequency", &dcdcfreq);
+ /* axp20x_set_dcdc_freq() takes kHZ */
+ dcdcfreq /= 1000;
ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
if (ret < 0) {
dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret);
--
2.1.4


\
 
 \ /
  Last update: 2015-01-22 17:01    [W:0.083 / U:0.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site