lkml.org 
[lkml]   [2015]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] thermal: rockchip: make temperature reporting much more accurate

在 2015年01月22日 12:01, Daniel Kurtz 写道:
> On Thu, Jan 22, 2015 at 1:29 AM, Caesar Wang <wxt@rock-chips.com> wrote:
>> In general, the kernel should report temperature readings exactly as
>> reported by the hardware. The cpu / gpu thermal driver works in 5 degree
>> increments,but we ought to do more accurate. The temperature will do
>> linear interpolation between the entries in the table.
>>
>> Test= $md5sum /dev/zero &
>> $while true; do grep "" /sys/class/thermal/thermal_zone[1-2]/temp;
>> sleep .5; done
>>
>> e.g. We can get the result as follows:
>> /sys/class/thermal/thermal_zone1/temp:39994
>> /sys/class/thermal/thermal_zone2/temp:39086
>> /sys/class/thermal/thermal_zone1/temp:39994
>> /sys/class/thermal/thermal_zone2/temp:39540
>> /sys/class/thermal/thermal_zone1/temp:39540
>> /sys/class/thermal/thermal_zone2/temp:39540
>> /sys/class/thermal/thermal_zone1/temp:39540
>> /sys/class/thermal/thermal_zone2/temp:39994
>>
>> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
>> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
>>
>> ---
>>
>> Changes in v3:
>> Suggested-by Daniel Kurtz,
>> the check doesn't reject "code == 0xfff"
>> Fixed in rk_tsadcv2_code_to_temp(u32 code)
>>
>> Changes in v2:
>> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
>>
>> drivers/thermal/rockchip_thermal.c | 32 ++++++++++++++++++++++----------
>> 1 file changed, 22 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
>> index 1bcddfc..ce18007 100644
>> --- a/drivers/thermal/rockchip_thermal.c
>> +++ b/drivers/thermal/rockchip_thermal.c
>> @@ -193,19 +193,22 @@ static u32 rk_tsadcv2_temp_to_code(long temp)
>>
>> static long rk_tsadcv2_code_to_temp(u32 code)
>> {
>> - int high, low, mid;
>> -
>> - low = 0;
>> - high = ARRAY_SIZE(v2_code_table) - 1;
>> - mid = (high + low) / 2;
>> + unsigned int low = 0;
>> + unsigned int high = ARRAY_SIZE(v2_code_table) - 1;
>> + unsigned int mid = (low + high) / 2;
>> + unsigned int num;
>> + unsigned long denom;
>>
>> + /* No code available, return callback */
>> if (code > v2_code_table[low].code || code < v2_code_table[high].code)
>> - return 125000; /* No code available, return max temperature */
>> + return rk_tsadcv2_code_to_temp(code);
> Isn't this an infinite recursion?

No, I think we can try check if it is happened.
Maybe we can return a warning/error for it.
>> while (low <= high) {
>> - if (code >= v2_code_table[mid].code && code <
>> - v2_code_table[mid - 1].code)
>> - return v2_code_table[mid].temp;
>> + if (code >= v2_code_table[mid].code &&
>> + code < v2_code_table[mid - 1].code)
>> + break;
>> + else if (code == TSADCV2_DATA_MASK)
>> + break;
>> else if (code < v2_code_table[mid].code)
>> low = mid + 1;
>> else
>> @@ -213,7 +216,16 @@ static long rk_tsadcv2_code_to_temp(u32 code)
>> mid = (low + high) / 2;
>> }
>>
>> - return 125000;
>> + /*
>> + * The 5C granularity provided by the table is too much. Let's
>> + * assume that the relationship between sensor readings and
>> + * temperature between 2 table entries is linear and interpolate
>> + * to produce less granular result.
>> + */
>> + num = v2_code_table[mid].temp - v2_code_table[mid - 1].temp;
>> + num *= v2_code_table[mid - 1].code - code;
>> + denom = v2_code_table[mid - 1].code - v2_code_table[mid].code;
>> + return v2_code_table[mid - 1].temp + (num / denom);
>> }
>>
>> /**
>> --
>> 1.9.1
>>
>>
>
>

--
Best regards
Caesar Wang (王晓腾)
福州瑞芯微电子有限公司
Fuzhou Rockchip Electronics Co.Ltd
福建省福州市铜盘路软件大道89号软件园A区18号楼(350003)
Addr:No.18 Building, A District, No.89, software Boulevard Fuzhou, Fujian,PRC
Email:wxt@rock-chips.com
Tel:+86-591-83991906/07->8221




\
 
 \ /
  Last update: 2015-01-22 05:41    [W:1.003 / U:0.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site