lkml.org 
[lkml]   [2015]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [alsa-devel] [PATCH v2 RESEND 2/2] mfd: arizona: Update DT binding to support OUTn_MONO init_data
On Tue, 20 Jan 2015, Charles Keepax wrote:

> On Tue, Jan 20, 2015 at 04:02:48PM +0000, Lee Jones wrote:
> > On Tue, 20 Jan 2015, Mark Brown wrote:
> >
> > > On Tue, Jan 20, 2015 at 12:20:05PM +0000, Lee Jones wrote:
> > > > On Fri, 02 Jan 2015, Inha Song wrote:
> > >
> > > > > This patch update DT binding to support OUTn_MONO init_data. Each
> > > > > output signal can be configurated as a mono differential output.
> > > > > The mono differential configuration is selected using the OUTn_MONO
> > > > > registers.
> > >
> > > > This requires a DT Ack and an entry in the example.
> > >
> > > The DT maintainers have said they're OK with maintainers just merging
> > > things if they're comfortable with it (see the bindings specific
> > > submitting-patches.txt) and given their workload and general resulting
> > > responsiveness it's going to make it difficult go get anything done.
> >
> > I only tend to poke the DT guys when I am unsure of something in the
> > binding. In this case it was a doubt whether we should be encoding
> > register values inside a property like this.
> >
> > I would also be happy to take it with your Ack if you're happy with
> > it?
>
> In this case really it is a boolean indicating if the
> corresponding output is mono or not. It is handled thusly in the
> code:
>
> if (arizona->pdata.out_mono[i])
> val = ARIZONA_OUT1_MONO;
> else
> val = 0;
>
> Perhaps some further wording tweaks on the Documentation patch
> would be appropriate, but certainly I am happy enough with the
> binding.

Very well. As you and Mark seem happy with the approach I will be
more lenient on the next submission. An example and some working
tweaks would improve chances of acceptance further still.

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog


\
 
 \ /
  Last update: 2015-01-20 18:21    [W:0.223 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site