lkml.org 
[lkml]   [2015]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/4] net: stmmac: dwmac-rk: Don't set the regulator voltage for phy from the driver
Date
As these settings can be directly expressed from devicetree for both fixed
regulators and pmic-integrated regulators, it is more standard to set them
from dts and let the regulator framework use the right voltage informations
when it is used in the driver.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 1 -
1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 35f9b86..06e1637 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -303,7 +303,6 @@ static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
} else {
if (enable) {
if (!regulator_is_enabled(ldo)) {
- regulator_set_voltage(ldo, 3300000, 3300000);
ret = regulator_enable(ldo);
if (ret != 0)
dev_err(dev, "%s: fail to enable %s\n",
--
1.9.1


\
 
 \ /
  Last update: 2015-01-20 08:21    [W:0.070 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site