lkml.org 
[lkml]   [2015]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] ARM: dts: Add DISP1 power domain for exynos5420
Date
The DISP1 power domain on Exynos5420 SoC includes the FIMD1, MIXER
and HDMI modules. Add a device node for this power domain and mark
these modules as consumer of the DISP1 power domain.

When a power domain is powered on and off, the input clocks of the
devices attached to it are reparented. So a reference to the input
and parent clocks of the devices are needed to manage that.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
arch/arm/boot/dts/exynos5420.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index e5cb74d2b9f5..9dc2e9773b30 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -274,6 +274,20 @@
#power-domain-cells = <0>;
};

+ disp_pd: power-domain@100440C0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x100440C0 0x20>;
+ #power-domain-cells = <0>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK200>,
+ <&clock CLK_MOUT_USER_ACLK200_DISP1>,
+ <&clock CLK_MOUT_SW_ACLK300>,
+ <&clock CLK_MOUT_USER_ACLK300_DISP1>,
+ <&clock CLK_MOUT_SW_ACLK400>,
+ <&clock CLK_MOUT_USER_ACLK400_DISP1>;
+ clock-names = "oscclk", "pclk0", "clk0",
+ "pclk1", "clk1", "pclk2", "clk2";
+ };
+
pinctrl_0: pinctrl@13400000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x13400000 0x1000>;
@@ -541,6 +555,7 @@
fimd: fimd@14400000 {
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
+ power-domains = <&disp_pd>;
};

adc: adc@12D10000 {
@@ -714,6 +729,7 @@
phy = <&hdmiphy>;
samsung,syscon-phandle = <&pmu_system_controller>;
status = "disabled";
+ power-domains = <&disp_pd>;
};

hdmiphy: hdmiphy@145D0000 {
@@ -726,6 +742,7 @@
interrupts = <0 94 0>;
clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
+ power-domains = <&disp_pd>;
};

gsc_0: video-scaler@13e00000 {
--
2.1.3


\
 
 \ /
  Last update: 2015-01-20 11:41    [W:0.064 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site