lkml.org 
[lkml]   [2015]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[alsa-devel] [PATCH v2 RESEND 2/2] mfd: arizona: Update DT binding to support OUTn_MONO init_data
Date
This patch update DT binding to support OUTn_MONO init_data. Each
output signal can be configurated as a mono differential output.
The mono differential configuration is selected using the OUTn_MONO
registers.

Signed-off-by: Inha Song <ideal.song@samsung.com>
---
Documentation/devicetree/bindings/mfd/arizona.txt | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 7bd1273..cf11d42 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -49,6 +49,13 @@ Optional properties:
input singals. If values less than the number of input signals, elements
that has not been specifed are set to 0 by default.

+ - wlf,out-mono : A list of OUTn_MONO register values, where n is the number
+ of output signals. Valid values are 0 (Disabled) and 1 (Enabled). If absent,
+ OUTn_MONO registers set to 0 by default. If present, values must be specified
+ less than or equal to the number of output signals. If values less than the
+ number of input signals, elements that has not been specified are set to 0
+ by default.
+
- DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
they are being externally supplied. As covered in
Documentation/devicetree/bindings/regulator/regulator.txt
--
2.0.0.390.gcb682f8


\
 
 \ /
  Last update: 2015-01-02 09:41    [W:1.067 / U:4.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site