lkml.org 
[lkml]   [2015]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/5] ARM:sunxi:drivers:input Add support for A10/A20 PS2
On Mon, Jan 19, 2015 at 11:37:38AM +0530, Vishnu Patekar wrote:
> Hello Dmitry,
>
> Thank you for review comments. Please see in-lined.
>
> On Sun, Jan 18, 2015 at 3:55 AM, Dmitry Torokhov
> <dmitry.torokhov@gmail.com> wrote:
> > Hi Vishnu,
> >
> > On Fri, Jan 16, 2015 at 07:33:38PM +0530, Vishnu Patekar wrote:
> >> Signed-off-by: VishnuPatekar <vishnupatekar0510@gmail.com>
> >> ---
> >> drivers/input/serio/Kconfig | 11 ++
> >> drivers/input/serio/Makefile | 1 +
> >> drivers/input/serio/sun4i-ps2.c | 330 +++++++++++++++++++++++++++++++++++++++
> >> 3 files changed, 342 insertions(+)
> >> create mode 100644 drivers/input/serio/sun4i-ps2.c
> >>
> >> diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
> >> index bc2d474..964afc5 100644
> >> --- a/drivers/input/serio/Kconfig
> >> +++ b/drivers/input/serio/Kconfig
> >> @@ -281,4 +281,15 @@ config HYPERV_KEYBOARD
> >> To compile this driver as a module, choose M here: the module will
> >> be called hyperv_keyboard.
> >>
> >> +config SERIO_SUN4I_PS2
> >> + tristate "Allwinner A10 PS/2 controller support"
> >> + default n
> >> + depends on ARCH_SUNXI || COMPILE_TEST
> >> + help
> >> + This selects support for the PS/2 Host Controller on
> >> + Allwinner A10.
> >> +
> >> + To compile this driver as a module, choose M here: the
> >> + module will be called sun4i-ps2.
> >> +
> >> endif
> >> diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
> >> index 815d874..c600089 100644
> >> --- a/drivers/input/serio/Makefile
> >> +++ b/drivers/input/serio/Makefile
> >> @@ -29,3 +29,4 @@ obj-$(CONFIG_SERIO_ARC_PS2) += arc_ps2.o
> >> obj-$(CONFIG_SERIO_APBPS2) += apbps2.o
> >> obj-$(CONFIG_SERIO_OLPC_APSP) += olpc_apsp.o
> >> obj-$(CONFIG_HYPERV_KEYBOARD) += hyperv-keyboard.o
> >> +obj-$(CONFIG_SERIO_SUN4I_PS2) += sun4i-ps2.o
> >> diff --git a/drivers/input/serio/sun4i-ps2.c b/drivers/input/serio/sun4i-ps2.c
> >> new file mode 100644
> >> index 0000000..06b3fef
> >> --- /dev/null
> >> +++ b/drivers/input/serio/sun4i-ps2.c
> >> @@ -0,0 +1,330 @@
> >> +/*
> >> + * Driver for Allwinner A10 PS2 host controller
> >> + *
> >> + * Author: Vishnu Patekar <vishnupatekar0510@gmail.com>
> >> + * Aaron.maoye <leafy.myeh@newbietech.com>
> >> + *
> >> + *
> >> + */
> >> +
> >> +#include <linux/module.h>
> >> +#include <linux/serio.h>
> >> +#include <linux/interrupt.h>
> >> +#include <linux/errno.h>
> >> +#include <linux/slab.h>
> >> +#include <linux/list.h>
> >> +#include <linux/io.h>
> >> +#include <linux/of_address.h>
> >> +#include <linux/of_device.h>
> >> +#include <linux/of_irq.h>
> >> +#include <linux/of_platform.h>
> >> +#include <linux/clk.h>
> >> +#include <linux/delay.h>
> >> +
> >> +#define DRIVER_NAME "sun4i-ps2"
> >> +
> >> +/* register offset definitions */
> >> +#define PS2_REG_GCTL 0x00 /* PS2 Module Global Control Reg */
> >> +#define PS2_REG_DATA 0x04 /* PS2 Module Data Reg */
> >> +#define PS2_REG_LCTL 0x08 /* PS2 Module Line Control Reg */
> >> +#define PS2_REG_LSTS 0x0C /* PS2 Module Line Status Reg */
> >> +#define PS2_REG_FCTL 0x10 /* PS2 Module FIFO Control Reg */
> >> +#define PS2_REG_FSTS 0x14 /* PS2 Module FIFO Status Reg */
> >> +#define PS2_REG_CLKDR 0x18 /* PS2 Module Clock Divider Reg*/
> >> +
> >> +/* PS2 GLOBAL CONTROL REGISTER PS2_GCTL */
> >> +#define PS2_GCTL_INTFLAG BIT(4)
> >> +#define PS2_GCTL_INTEN BIT(3)
> >> +#define PS2_GCTL_RESET BIT(2)
> >> +#define PS2_GCTL_MASTER BIT(1)
> >> +#define PS2_GCTL_BUSEN BIT(0)
> >> +
> >> +/* PS2 LINE CONTROL REGISTER */
> >> +#define PS2_LCTL_NOACK BIT(18)
> >> +#define PS2_LCTL_TXDTOEN BIT(8)
> >> +#define PS2_LCTL_STOPERREN BIT(3)
> >> +#define PS2_LCTL_ACKERREN BIT(2)
> >> +#define PS2_LCTL_PARERREN BIT(1)
> >> +#define PS2_LCTL_RXDTOEN BIT(0)
> >> +
> >> +/* PS2 LINE STATUS REGISTER */
> >> +#define PS2_LSTS_TXTDO BIT(8)
> >> +#define PS2_LSTS_STOPERR BIT(3)
> >> +#define PS2_LSTS_ACKERR BIT(2)
> >> +#define PS2_LSTS_PARERR BIT(1)
> >> +#define PS2_LSTS_RXTDO BIT(0)
> >> +
> >> +#define PS2_LINE_ERROR_BIT \
> >> + (PS2_LSTS_TXTDO | PS2_LSTS_STOPERR | PS2_LSTS_ACKERR | \
> >> + PS2_LSTS_PARERR | PS2_LSTS_RXTDO)
> >> +
> >> +/* PS2 FIFO CONTROL REGISTER */
> >> +#define PS2_FCTL_TXRST BIT(17)
> >> +#define PS2_FCTL_RXRST BIT(16)
> >> +#define PS2_FCTL_TXUFIEN BIT(10)
> >> +#define PS2_FCTL_TXOFIEN BIT(9)
> >> +#define PS2_FCTL_TXRDYIEN BIT(8)
> >> +#define PS2_FCTL_RXUFIEN BIT(2)
> >> +#define PS2_FCTL_RXOFIEN BIT(1)
> >> +#define PS2_FCTL_RXRDYIEN BIT(0)
> >> +
> >> +/* PS2 FIFO STATUS REGISTER */
> >> +#define PS2_FSTS_TXUF BIT(10)
> >> +#define PS2_FSTS_TXOF BIT(9)
> >> +#define PS2_FSTS_TXRDY BIT(8)
> >> +#define PS2_FSTS_RXUF BIT(2)
> >> +#define PS2_FSTS_RXOF BIT(1)
> >> +#define PS2_FSTS_RXRDY BIT(0)
> >> +
> >> +#define PS2_FIFO_ERROR_BIT \
> >> + (PS2_FSTS_TXUF | PS2_FSTS_TXOF | PS2_FSTS_RXUF | PS2_FSTS_RXOF)
> >> +
> >> +#define PS2_SAMPLE_CLK 1000000
> >> +#define PS2_SCLK 125000
> >> +
> >> +struct sun4i_ps2data {
> >> + struct serio *serio;
> >> + struct device *dev;
> >> +
> >> + /* IO mapping base */
> >> + void __iomem *reg_base;
> >> +
> >> + /* clock management */
> >> + struct clk *clk;
> >> +
> >> + /* irq */
> >> + spinlock_t lock;
> >> + int irq;
> >> +};
> >> +
> >> +/*********************/
> >> +/* Interrupt handler */
> >> +/*********************/
> >> +static irqreturn_t sun4i_ps2_interrupt(int irq, void *dev_id)
> >> +{
> >> + struct sun4i_ps2data *drvdata = dev_id;
> >> + u32 intr_status;
> >> + u32 fifo_status;
> >> + unsigned char byte;
> >> + unsigned int rxflags = 0;
> >> + u32 rval;
> >> +
> >> + spin_lock(&drvdata->lock);
> >> +
> >> + /* Get the PS/2 interrupts and clear them */
> >> + intr_status = readl(drvdata->reg_base + PS2_REG_LSTS);
> >> + fifo_status = readl(drvdata->reg_base + PS2_REG_FSTS);
> >> +
> >> + /*Check Line Status Register*/
> >> + if (intr_status & PS2_LINE_ERROR_BIT) {
> >> + rxflags = (intr_status & PS2_LINE_ERROR_BIT) ? SERIO_FRAME : 0;
> >> + rxflags |= (intr_status & PS2_LSTS_PARERR) ? SERIO_PARITY : 0;
> >> + rxflags |= (intr_status & PS2_LSTS_PARERR) ? SERIO_TIMEOUT : 0;
> >> +
> >> + rval = PS2_LSTS_TXTDO | PS2_LSTS_STOPERR | PS2_LSTS_ACKERR |
> >> + PS2_LSTS_PARERR | PS2_LSTS_RXTDO;
> >> + writel(rval, drvdata->reg_base + PS2_REG_LSTS);
> >> + }
> >> +
> >> + /*Check FIFO Status Register*/
> >> + if (fifo_status & PS2_FIFO_ERROR_BIT) {
> >> + rval = PS2_FSTS_TXUF | PS2_FSTS_TXOF | PS2_FSTS_TXRDY |
> >> + PS2_FSTS_RXUF | PS2_FSTS_RXOF | PS2_FSTS_RXRDY;
> >> + writel(rval, drvdata->reg_base + PS2_REG_FSTS);
> >> + }
> >> +
> >> + rval = (fifo_status >> 16) & 0x3;
> >> + while (rval--) {
> >> + byte = readl(drvdata->reg_base + PS2_REG_DATA) & 0xff;
> >> + serio_interrupt(drvdata->serio, byte, rxflags);
> >> + }
> >> +
> >> + writel(intr_status, drvdata->reg_base + PS2_REG_LSTS);
> >> + writel(fifo_status, drvdata->reg_base + PS2_REG_FSTS);
> >> +
> >> + spin_unlock(&drvdata->lock);
> >> +
> >> + return IRQ_HANDLED;
> >> +}
> >> +
> >> +
> >> +static int sun4i_ps2_open(struct serio *pserio)
> >> +{
> >> + struct sun4i_ps2data *drvdata = pserio->port_data;
> >> + u32 src_clk = 0;
> >> + u32 clk_scdf;
> >> + u32 clk_pcdf;
> >> + u32 rval;
> >> + unsigned long flags;
> >> +
> >> + /*Set Line Control And Enable Interrupt*/
> >> + rval = PS2_LCTL_STOPERREN | PS2_LCTL_ACKERREN
> >> + | PS2_LCTL_PARERREN | PS2_LCTL_RXDTOEN;
> >> + writel(rval, drvdata->reg_base + PS2_REG_LCTL);
> >> +
> >> + /*Reset FIFO*/
> >> + rval = PS2_FCTL_TXRST | PS2_FCTL_RXRST | PS2_FCTL_TXUFIEN
> >> + | PS2_FCTL_TXOFIEN | PS2_FCTL_RXUFIEN
> >> + | PS2_FCTL_RXOFIEN | PS2_FCTL_RXRDYIEN;
> >> +
> >> + writel(rval, drvdata->reg_base + PS2_REG_FCTL);
> >> +
> >> + src_clk = clk_get_rate(drvdata->clk);
> >> + /*Set Clock Divider Register*/
> >> + clk_scdf = src_clk / PS2_SAMPLE_CLK - 1;
> >> + clk_pcdf = PS2_SAMPLE_CLK / PS2_SCLK - 1;
> >> + rval = (clk_scdf<<8) | clk_pcdf;
> >> + writel(rval, drvdata->reg_base + PS2_REG_CLKDR);
> >> +
> >> +
> >> + /*Set Global Control Register*/
> >> + rval = PS2_GCTL_RESET | PS2_GCTL_INTEN | PS2_GCTL_MASTER
> >> + | PS2_GCTL_BUSEN;
> >> +
> >> + spin_lock_irqsave(&drvdata->lock, flags);
> >> + writel(rval, drvdata->reg_base + PS2_REG_GCTL);
> >> + spin_unlock_irqrestore(&drvdata->lock, flags);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static void sun4i_ps2_close(struct serio *pserio)
> >> +{
> >> + struct sun4i_ps2data *drvdata = pserio->port_data;
> >> +
> >> + synchronize_irq(drvdata->irq);
> >
> > synchronize_irq() on it's own is not very useful. You also need to shut
> > off interrupts on the chip (I suppose by clearing PS2_GCTL_INTEN?)
> > before calling synchronize_irq.
> Okie, I'll do it. Yes, clearing PS2_GCTL_INTEN will shut off the interrupts.

Please also do shut off interrupts on the chip before requesting IRQ.

> >
> >> +}
> >> +
> >> +static int sun4i_ps2_write(struct serio *pserio, unsigned char val)
> >> +{
> >> + unsigned long expire = jiffies + msecs_to_jiffies(10000);
> >> + struct sun4i_ps2data *drvdata;
> >> +
> >> + drvdata = (struct sun4i_ps2data *)pserio->port_data;
> >> +
> >> + do {
> >> + if (readl(drvdata->reg_base + PS2_REG_FSTS) & PS2_FSTS_TXRDY) {
> >> + writel(val, drvdata->reg_base + PS2_REG_DATA);
> >> + return 0;
> >> + }
> >> + } while (time_before(jiffies, expire));
> >> +
> >> + return SERIO_TIMEOUT;
> >> +}
> >> +
> >> +static int sun4i_ps2_probe(struct platform_device *pdev)
> >> +{
> >> + struct resource *res; /* IO mem resources */
> >> + struct sun4i_ps2data *drvdata;
> >> + struct serio *serio;
> >> + struct device *dev = &pdev->dev;
> >> + unsigned int irq;
> >> + int error;
> >> +
> >> + drvdata = devm_kzalloc(dev, sizeof(struct sun4i_ps2data), GFP_KERNEL);
> >> + serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
> >> + if (!drvdata || !serio) {
> >> + error = -ENOMEM;
> >> + goto err_free_mem;
> >> + }
> >> +
> >> + spin_lock_init(&drvdata->lock);
> >> +
> >> + /* IO */
> >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >> + drvdata->reg_base = devm_ioremap_resource(dev, res);
> >> + if (IS_ERR(drvdata->reg_base)) {
> >> + dev_err(dev, "failed to map registers\n");
> >> + error = PTR_ERR(drvdata->reg_base);
> >> + goto err_free_mem;
> >> + }
> >> +
> >> + drvdata->clk = devm_clk_get(dev, NULL);
> >> + if (IS_ERR(drvdata->clk)) {
> >> + error = PTR_ERR(drvdata->clk);
> >> + dev_err(dev, "couldn't get clock %d\n", error);
> >> + goto err_free_mem;
> >> + }
> >> +
> >> + error = clk_prepare_enable(drvdata->clk);
> >> + if (error) {
> >> + dev_err(dev, "failed to enable clock %d\n", error);
> >> + goto err_free_mem;
> >> + }
> >> +
> >> + serio->id.type = SERIO_8042;
> >> + serio->write = sun4i_ps2_write;
> >> + serio->open = sun4i_ps2_open;
> >> + serio->close = sun4i_ps2_close;
> >> + serio->port_data = drvdata;
> >> + serio->dev.parent = dev;
> >> + strlcpy(serio->name, dev_name(dev), sizeof(serio->name));
> >> + strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys));
> >> +
> >> + /* Get IRQ for the device */
> >> + irq = platform_get_irq(pdev, 0);
> >> + if (!irq) {
> >> + dev_err(dev, "no IRQ found\n");
> >> + error = -ENXIO;
> >> + goto error_disable_clk;
> >> + }
> >> +
> >> + drvdata->irq = irq;
> >> + drvdata->serio = serio;
> >> + drvdata->dev = dev;
> >> + error = devm_request_threaded_irq(dev, drvdata->irq,
> >> + sun4i_ps2_interrupt, NULL, 0, DRIVER_NAME, drvdata);
> >> +
> >> + if (error) {
> >> + dev_err(drvdata->dev, "Interrupt alloc failed %d:error:%d\n",
> >> + drvdata->irq, error);
> >> + goto error_disable_clk;
> >> + }
> >> +
> >> + serio_register_port(serio);
> >> + platform_set_drvdata(pdev, drvdata);
> >> +
> >> + return 0; /* success */
> >> +
> >> +error_disable_clk:
> >> + clk_disable_unprepare(drvdata->clk);
> >> +
> >> +err_free_mem:
> >> + kfree(serio);
> >> + return error;
> >> +}
> >> +
> >> +static int sun4i_ps2_remove(struct platform_device *pdev)
> >> +{
> >> + struct sun4i_ps2data *drvdata = platform_get_drvdata(pdev);
> >> +
> >> + serio_unregister_port(drvdata->serio);
> >> +
> >> + if (!IS_ERR(drvdata->clk))
> >> + clk_disable_unprepare(drvdata->clk);
> >> + kfree(drvdata->serio);
> >
> > Serio is refcounted, you do not free it after its has been registered.
> > Overall I'd rather you did not use devm* interfaces here since you are
> > forced to mix managed and manually freed resources.
> Okie, No need to free serio here.
> If serio is not manually freed here, It is not freeing anything else manually.

You are still unregistering the port manually and disabling the clock manually.
>
> do you still feel I should not use devm* interfaces here?

Yes, because of above. My rule of thumb - when using devm* API there should not
be remove() at all.

BTW, if one added devm_* API to serio, similar to devm* in input core, I'd take
such patch.

Thanks.

--
Dmitry


\
 
 \ /
  Last update: 2015-01-20 02:01    [W:0.092 / U:6.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site